Low Budget Shinyitis

[rosesense]

I don't sub ohm so not the best person to ask but I remember clearly that when we first had 'mods' that were 5v, we couldn't use regular attys, had to use HR ones. By reg atty, I don't mean sub ohm resistance, either. IIRC, the HR's were above 2.5 ohms.

 

[Rathamar]

Oh this thread is going to be bad for me. I keep telling myself I have enough, but I see that the packages are going to be showing up for a while now.......

 

[f1vefour]

In the description it says to use only protected batteries. To my understanding the batteries we use as a whole aren’t protected due to additional size. Is that mod slightly longer than the more common sizes that use unprotected 18650s? Can you fit a mosfet in there without any issue?

Because it's anodized aluminum a mosfet wouldn't ground properly.

 

[f1vefour]

What about a mech would make it not suitable for sub ohm vaping? Very thin battery contacts? My level of “expertise” has me checking the coil, battery capability and then overall quality of the mech itself. I’m sure there’s some $2 mechs out there built out of tissue paper but the ones I’ve seen like that (da one, for example) I wouldn’t want to run anything in.

What separates mechs suitable for sub ohm from ones not suitable?

The switch and or the spring for the battery.

 

[dwcraig1]

GeekVape Frenzy Pod Device Kit
I ordered 2 @ $4.55 ea. for giveaways.

 

[classwife]

GeekVape Frenzy Pod Device Kit
I ordered 2 @ $4.55 ea. for giveaways.

Those are cute !

 

[HigherStateD]

Those are cute !

And they're put together and vape quite well too!

 

[Zaryk]

What about a mech would make it not suitable for sub ohm vaping? Very thin battery contacts? My level of “expertise” has me checking the coil, battery capability and then overall quality of the mech itself. I’m sure there’s some $2 mechs out there built out of tissue paper but the ones I’ve seen like that (da one, for example) I wouldn’t want to run anything in.

What separates mechs suitable for sub ohm from ones not suitable?

Some older mechs were not designed to handle the current that sub ohm vaping uses. The switch, springs, and other components could fail from overheating because of it. Most modern mechs are built much better and can easily handle sub ohm builds just fine.

 

[DPLongo22]

Idunno if anyone's posted these yet, but I figured, "What the heck."

We've got a few of the larger ones, the 18650 version, and don't really want any more internal battery mods, but for the "Kinky" folks among us (it'll hit ya's), $7 ain't bad!!!

"Seven dollah, make ya hollah!"

OBS Cube Mini Vape Kit with Cube Mini Tank - 1500mAh & 3ml

I can't speak to this particular model, but I'm really liking its big bro'.

Only one of these is mine. The other traveled west, a while back. Don't bother laughing at the colors either, because I don't care.

 

[Nailz]

Idunno if anyone's posted these yet, but I figured, "What the heck."

We've got a few of the larger ones, the 18650 version, and don't really want any more internal battery mods, but for the "Kinky" folks among us (it'll hit ya's), $7 ain't bad!!!

"Seven dollah, make ya hollah!"

OBS Cube Mini Vape Kit with Cube Mini Tank - 1500mAh & 3ml

I can't speak to this particular model, but I'm really liking its big bro'.

Only one of these is mine. The other traveled west, a while back. Don't bother laughing at the colors either, because I don't care.

View attachment 847731

I got one of the minis, runs power depending on your coil, can't change power setting, which I didn't realize, so now just sits on the shelf. It is a tiny little mod and good looking though, just not what I thought.

 

[rosesense]

Idunno if anyone's posted these yet, but I figured, "What the heck."

We've got a few of the larger ones, the 18650 version, and don't really want any more internal battery mods, but for the "Kinky" folks among us (it'll hit ya's), $7 ain't bad!!!

"Seven dollah, make ya hollah!"

OBS Cube Mini Vape Kit with Cube Mini Tank - 1500mAh & 3ml

I can't speak to this particular model, but I'm really liking its big bro'.

Only one of these is mine. The other traveled west, a while back. Don't bother laughing at the colors either, because I don't care.

View attachment 847731

Funny, I just ordered one or two of those yesterday.

 

[DPLongo22]

I got one of the minis, runs power depending on your coil, can't change power setting, which I didn't realize, so now just sits on the shelf. It is a tiny little mod and good looking though, just not what I thought.

Ohhhhhh..... REALLY? I did NOT know THAT.

Not my cuppa...

 

[Nailz]

Ohhhhhh..... REALLY? I did NOT know THAT.

Not my cuppa...

Me neither till it turned up, note to self, ALWAYS read the description before ordering

 

[DPLongo22]

Me neither till it turned up, note to self, ALWAYS read the description before ordering

I'm floored, given the others in the same line. What were they thinking?????

 

[Nailz]

I'm floored, given the others in the same line. What were they thinking?????

Right, I just presumed it was a cube with a smaller battery, as already have the original cube, didn't think I needed to read about it.....wrong

 

[Eskie]

Me neither till it turned up, note to self, ALWAYS read the description before ordering

Unless the price is really, really good. Then you can read the blurb when you get it.

 

[Electrodave]

I wish I could give you a link, but they're all gone now. Authentic Vicious Ant Silverback for $50! Insane! Excellent, well built 18350 mod. Seen on my fret press wearing an In'Sane RDTA clone.

 

[Ruben41771]

Got this for my back up's back up ...
I prefer dual coil setup up's but got both the mod and rta for 40$ new.

 

[Susaz]

View attachment 827409

Low budget sure keeps me on my toes
I count every penny and I watch where it goes

I've seen several of your posts about that mod and still no clue to what it is!
The Pure by Fumitech is almost exactly, the switch is placed on the side, but still 100 bucks. Conductivity concerns me a lot when it comes to clones...

Buy Authentic Fumytech BDvape White Pure BF Mechanical Box Mod

 

[DeloresRose]

I've seen several of your posts about that mod and still no clue to what it is!
The Pure by Fumitech is almost exactly, the switch is placed on the side, but still 100 bucks. Conductivity concerns me a lot when it comes to clones...

Buy Authentic Fumytech BDvape White Pure BF Mechanical Box Mod

That’s a clone of a limelight Gloom I got from fasttech, but they sold out. Just a cheap mod. A nice vape though