"Mac Modz" Titanium Mechanical,Tank, + Genesis

[Idaholandho]

Hello all. Whats a guy got to do to get a drink in this place? Im here for the family reunion from the other 3 threads and to be placed on the list!

Poor threading, weak engraving, crunchy button, and sharp edges. This was just my experience with two mods. I can only base my comparison off of those two. It just felt rushed. Just my opinion though.

Bingo, you forgot the dirty finish and the seams that are seem from the thread connections. A knows how to build a mod but, failed this run in terms of precision work imo. I honestly still respect them and like their business model and service.
I brought every one of these points up when I received mine and they ignored me. Crazy Uncle Larzis has also read my thoughts on this. I had mine for 24 hours and never even put a battery in it after my inspection before I sold it.

 

[Idaholandho]

Pls "copy" from below and "add" your 'user ID' (with requirement) on the next serial number:

THE MAC MODZ "LIST":
1. Qorax : 1 x Titanium, 21mm, 18350 mode (+ Extra 18500 Ring)
2. Ukeman : 1 x Ti, 22mm, 18500 mode
3. curisu : 22mm OD Ti, 18500 (changed my mind)
4. Boxcar: x1 22mm OD 18650, 18500 + Genisis Atomizer. REALLY want the Atty!
5. rbrzezinski : 1x Titanium, 22mm, 18350 plus 18500 tube (ring)
6. Cornolio : 1X ti 22mm short switch 18500 4 vent holes
7. scoopbb : 1x brass 26650, tapered top to 22mm
8. Cavaluchi : 1x Ti 22mm short switch 18350 plus 18500
9. Jcy0001 : 1xeverything including carto tank n Genisis
10. andrebandre : 1xTi 21mm short switch 18500, straight tube, no holes or rings or dimples and a gennie with a flat top and no decorations.
11. me1969 : however you want
12. 80cole : 1 TI and Alum 18500 with genie
13. masguapoakosyo : 1x23mm stainless steel 18500 tube with brass top and switch
14. Bigcypress : mod w/350,500,650 Ti tubes a350 brass tube, genisis, carto tank. Xtra parts
15. negrete35 : 22mm top cap and switch assembly with polished brass plunger. 3 sets of spare parts.
16. negrete35 : slim (28-29mm, or just as slim as possible) 26650 mod with cap tapered to 22mm.
17. joseph0280 : 22mm mod Ti 18350 + 18500 + 18650 mod. Short switch. + the Atomizer
18. sircharles : 22mm mod Ti 18350 + 18500 Ti tube + 18350 Alu tube + 18500 Alu tube; Ti Carto Tank
19. Sick HP : 22mm mod + TI Top / bottom short switch + alum 18500 tube. just like your avi pic.
20.Jquadz34 - 1x Ti 22mm short switch 18500
21. bris1974 - 1x Titanium 22mm, 350 short switch + 500 tube + genny
22. Bkjeeper-1x Ti 22mm, 18500 short switch + 18350 tube + carto tank
23. rumthin - 1x Ti 22mm short switch 18350
24. Xobeloot: Aluminum 22mm 18350 w/ Ti caps/short switch and additional 18500 ring x1 genesis atty x1
25. Jasl90: full Ti 30mm, 2 tubes (26500 & 2665); no taper on the top cap; short switch with a lock ring if possible. (edited)
26. 9ball_AJ - 1x Ti 22mm short switch 18350 + 500 tube
27. hobbyshaft : 1x Titanium, 22mm, 18350 + 18500 tube, Carto Tank, Genesis and all extras
28. REDXII99 : 1x 22mm 18350 mod. 1 Ti tube and 1 Alu tube
29. CGMST: 1x 22mm 18350. I like the brass tube tho. But I'd be happy with Ti too
30.Atlantisboy 1x 22mm 18350 Ti & Genesis dual airholes equivalent to 1mm draw If possible.
31. anskyboy 1x slim (28-29mm, or just as slim as possible) 26650 mod with cap tapered to 22mm. (just like negrete)
32. tybs_4045 1 x 22mm 18500 Ti(short switch) & Genesis
33. Intelik808. 1x22 18350,18500 ti tubes 510cap, genesis/hybrid, dual coil rda/hybrid
34. Fr0st 1x 22mm 18350 ti
35. Sero 1x 18650 22mm tube, No dimples or holes. Plain design with short button
36. Yuujin 1x 22mm Ti Mod,1x 18350 Ti Tube, 1x 18350 Al Tube with Cerakote coating(if possible),1x Ti Genesis, 2 Set Spares.
37. bk78 1x 22mm Ti 18500 with RDA hybrid
38. kojiro 1x22mm Ti 18500 short switch, 1x18650 Ti tube, 510cap, Ti carto tank.
39. kiba 1 x Titanium, 22mm, Flat Top Cap, 18350 mode (+ Extra 18500 Ring if Possible, or 18500 tube) no dimples or large vent holes if possible plz
40. mickeyklu 1x22mm Ti 18500 (no dimples in top cap) + 18500 brass tube.
41. inter_ceptor00 1x 22MM Ti 18350 tube, Ti 18650 tube, 510 cap, 22MM Ti genesis , Ti tank
42. Steaming EMT 1 x 18350 Titanium with the 18650 tube 510cap (cross air channels) and Atty (same as pic 13 what ever is the normal diameter 22mm i guess)
43.Brandall937 - 1x Titanium, 22mm, 18350 plus 18500 tube + Ti Genny + 510 Connector (all Ti)
44. Tripster - 1x Titanium, 22mm (or slimmer if possible), 18650 tube, 510 cap (1 cross air channel), short switch, plain w/o dimples and venting
45. COBRACOMMANDER82 1x 22mm Titanium Mod (without dimples, with 1 x flat top, 1 x air channeled top, 500 tube, 650 tube, with battery vents like on the Precise +, short switch)
46. COBRACOMMANDER82 x 1 Slim Titanium Mod 26650 (without dimples, with cap tapered to 22mm, with 1 x flat top, with battery vents like on the Precise +, short switch)
47. mackievill - 1x Ti 22mm short switch 18350 + 18500 tube (and if possible one extra brass top and bottom cap)
48. Idaholandho 1 Titanium 22mm short switch 18350 & ring or 18500 tube no dimples, no vent holes or 2 small if I have too , flat top.
49.
50.

 

[curisu]

Hello all. Whats a guy got to do to get a drink in this place? Im here for the family reunion from the other 3 threads and to be placed on the list!

damn brother, t'ain't fashionable to be late to vape parties . and it's BYOB; no worries, you can pull from my sixer.

 

[negrete35]

Pls "copy" from below and "add" your 'user ID' (with requirement) on the next serial number:

THE MAC MODZ "LIST":
1. Qorax : 1 x Titanium, 21mm, 18350 mode (+ Extra 18500 Ring)
2. Ukeman : 1 x Ti, 22mm, 18500 mode
3. curisu : 22mm OD Ti, 18500 (changed my mind)
4. Boxcar: x1 22mm OD 18650, 18500 + Genisis Atomizer. REALLY want the Atty!
5. rbrzezinski : 1x Titanium, 22mm, 18350 plus 18500 tube (ring)
6. Cornolio : 1X ti 22mm short switch 18500 4 vent holes
7. scoopbb : 1x brass 26650, tapered top to 22mm
8. Cavaluchi : 1x Ti 22mm short switch 18350 plus 18500
9. Jcy0001 : 1xeverything including carto tank n Genisis
10. andrebandre : 1xTi 21mm short switch 18500, straight tube, no holes or rings or dimples and a gennie with a flat top and no decorations.
11. me1969 : however you want
12. 80cole : 1 TI and Alum 18500 with genie
13. masguapoakosyo : 1x23mm stainless steel 18500 tube with brass top and switch
14. Bigcypress : mod w/350,500,650 Ti tubes a350 brass tube, genisis, carto tank. Xtra parts
15. negrete35 : hybrid dripper and switch assembly with polished brass plunger. 3 sets of spare parts.
16. negrete35 : slim 26650 mod, Ti cap and switch and aluminum tube. Cap tapered to 22mm.
17. joseph0280 : 22mm mod Ti 18350 + 18500 + 18650 mod. Short switch. + the Atomizer
18. sircharles : 22mm mod Ti 18350 + 18500 Ti tube + 18350 Alu tube + 18500 Alu tube; Ti Carto Tank
19. Sick HP : 22mm mod + TI Top / bottom short switch + alum 18500 tube. just like your avi pic.
20.Jquadz34 - 1x Ti 22mm short switch 18500
21. bris1974 - 1x Titanium 22mm, 350 short switch + 500 tube + genny
22. Bkjeeper-1x Ti 22mm, 18500 short switch + 18350 tube + carto tank
23. rumthin - 1x Ti 22mm short switch 18350
24. Xobeloot: Aluminum 22mm 18350 w/ Ti caps/short switch and additional 18500 ring x1 genesis atty x1
25. Jasl90: full Ti 30mm, 2 tubes (26500 & 2665); no taper on the top cap; short switch with a lock ring if possible. (edited)
26. 9ball_AJ - 1x Ti 22mm short switch 18350 + 500 tube
27. hobbyshaft : 1x Titanium, 22mm, 18350 + 18500 tube, Carto Tank, Genesis and all extras
28. REDXII99 : 1x 22mm 18350 mod. 1 Ti tube and 1 Alu tube
29. CGMST: 1x 22mm 18350. I like the brass tube tho. But I'd be happy with Ti too
30.Atlantisboy 1x 22mm 18350 Ti & Genesis dual airholes equivalent to 1mm draw If possible.
31. anskyboy 1x slim (28-29mm, or just as slim as possible) 26650 mod with cap tapered to 22mm. (just like negrete)
32. tybs_4045 1 x 22mm 18500 Ti(short switch) & Genesis
33. Intelik808. 1x22 18350,18500 ti tubes 510cap, genesis/hybrid, dual coil rda/hybrid
34. Fr0st 1x 22mm 18350 ti
35. Sero 1x 18650 22mm tube, No dimples or holes. Plain design with short button
36. Yuujin 1x 22mm Ti Mod,1x 18350 Ti Tube, 1x 18350 Al Tube with Cerakote coating(if possible),1x Ti Genesis, 2 Set Spares.
37. bk78 1x 22mm Ti 18500 with RDA hybrid
38. kojiro 1x22mm Ti 18500 short switch, 1x18650 Ti tube, 510cap, Ti carto tank.
39. kiba 1 x Titanium, 22mm, Flat Top Cap, 18350 mode (+ Extra 18500 Ring if Possible, or 18500 tube) no dimples or large vent holes if possible plz
40. mickeyklu 1x22mm Ti 18500 (no dimples in top cap) + 18500 brass tube.
41. inter_ceptor00 1x 22MM Ti 18350 tube, Ti 18650 tube, 510 cap, 22MM Ti genesis , Ti tank
42. Steaming EMT 1 x 18350 Titanium with the 18650 tube 510cap (cross air channels) and Atty (same as pic 13 what ever is the normal diameter 22mm i guess)
43.Brandall937 - 1x Titanium, 22mm, 18350 plus 18500 tube + Ti Genny + 510 Connector (all Ti)
44. Tripster - 1x Titanium, 22mm (or slimmer if possible), 18650 tube, 510 cap (1 cross air channel), short switch, plain w/o dimples and venting
45. COBRACOMMANDER82 1x 22mm Titanium Mod (without dimples, with 1 x flat top, 1 x air channeled top, 500 tube, 650 tube, with battery vents like on the Precise +, short switch)
46. COBRACOMMANDER82 x 1 Slim Titanium Mod 26650 (without dimples, with cap tapered to 22mm, with 1 x flat top, with battery vents like on the Precise +, short switch)
47. mackievill - 1x Ti 22mm short switch 18350 + 18500 tube (and if possible one extra brass top and bottom cap)
48. Idaholandho 1 Titanium 22mm short switch 18350 & ring or 18500 tube no dimples, 4 sm vent holes
49.
50.
51.
52.
53.



***DONT COPY THIS PART***

Just wanted to edit my order. Thanks.

 

[Larzis]

Bingo, you forgot the dirty finish and the seams that are seem from the thread connections. A knows how to build a mod but, failed this run in terms of precision work imo. I honestly still respect them and like their business model and service.
I brought every one of these points up when I received mine and they ignored me. Crazy Uncle Larzis has also read my thoughts on this. I had mine for 24 hours and never even put a battery in it after my inspection before I sold it.

And Crazy Uncle Larzis STILL loves his So much so I sent it off to VapeNShine. Matte Nem now a VW version with a bit of a twist... Justin redid all the Matte portions with some like media blasted kind of Satin and brushed it. Engravings held up fine and it is a thing of beauty.

 

[klockwood84]

THE MAC MODZ "LIST":
1. Qorax : 1 x Titanium, 21mm, 18350 mode (+ Extra 18500 Ring)
2. Ukeman : 1 x Ti, 22mm, 18500 mode
3. curisu : 22mm OD Ti, 18500 (changed my mind)
4. Boxcar: x1 22mm OD 18650, 18500 + Genisis Atomizer. REALLY want the Atty!
5. rbrzezinski : 1x Titanium, 22mm, 18350 plus 18500 tube (ring)
6. Cornolio : 1X ti 22mm short switch 18500 4 vent holes
7. scoopbb : 1x brass 26650, tapered top to 22mm
8. Cavaluchi : 1x Ti 22mm short switch 18350 plus 18500
9. Jcy0001 : 1xeverything including carto tank n Genisis
10. andrebandre : 1xTi 21mm short switch 18500, straight tube, no holes or rings or dimples and a gennie with a flat top and no decorations.
11. me1969 : however you want
12. 80cole : 1 TI and Alum 18500 with genie
13. masguapoakosyo : 1x23mm stainless steel 18500 tube with brass top and switch
14. Bigcypress : mod w/350,500,650 Ti tubes a350 brass tube, genisis, carto tank. Xtra parts
15. negrete35 : hybrid dripper and switch assembly with polished brass plunger. 3 sets of spare parts.
16. negrete35 : slim 26650 mod, Ti cap and switch and aluminum tube. Cap tapered to 22mm.
17. joseph0280 : 22mm mod Ti 18350 + 18500 + 18650 mod. Short switch. + the Atomizer
18. sircharles : 22mm mod Ti 18350 + 18500 Ti tube + 18350 Alu tube + 18500 Alu tube; Ti Carto Tank
19. Sick HP : 22mm mod + TI Top / bottom short switch + alum 18500 tube. just like your avi pic.
20.Jquadz34 - 1x Ti 22mm short switch 18500
21. bris1974 - 1x Titanium 22mm, 350 short switch + 500 tube + genny
22. Bkjeeper-1x Ti 22mm, 18500 short switch + 18350 tube + carto tank
23. rumthin - 1x Ti 22mm short switch 18350
24. Xobeloot: Aluminum 22mm 18350 w/ Ti caps/short switch and additional 18500 ring x1 genesis atty x1
25. Jasl90: full Ti 30mm, 2 tubes (26500 & 2665); no taper on the top cap; short switch with a lock ring if possible. (edited)
26. 9ball_AJ - 1x Ti 22mm short switch 18350 + 500 tube
27. hobbyshaft : 1x Titanium, 22mm, 18350 + 18500 tube, Carto Tank, Genesis and all extras
28. REDXII99 : 1x 22mm 18350 mod. 1 Ti tube and 1 Alu tube
29. CGMST: 1x 22mm 18350. I like the brass tube tho. But I'd be happy with Ti too
30.Atlantisboy 1x 22mm 18350 Ti & Genesis dual airholes equivalent to 1mm draw If possible.
31. anskyboy 1x slim (28-29mm, or just as slim as possible) 26650 mod with cap tapered to 22mm. (just like negrete)
32. tybs_4045 1 x 22mm 18500 Ti(short switch) & Genesis
33. Intelik808. 1x22 18350,18500 ti tubes 510cap, genesis/hybrid, dual coil rda/hybrid
34. Fr0st 1x 22mm 18350 ti
35. Sero 1x 18650 22mm tube, No dimples or holes. Plain design with short button
36. Yuujin 1x 22mm Ti Mod,1x 18350 Ti Tube, 1x 18350 Al Tube with Cerakote coating(if possible),1x Ti Genesis, 2 Set Spares.
37. bk78 1x 22mm Ti 18500 with RDA hybrid
38. kojiro 1x22mm Ti 18500 short switch, 1x18650 Ti tube, 510cap, Ti carto tank.
39. kiba 1 x Titanium, 22mm, Flat Top Cap, 18350 mode (+ Extra 18500 Ring if Possible, or 18500 tube) no dimples or large vent holes if possible plz
40. mickeyklu 1x22mm Ti 18500 (no dimples in top cap) + 18500 brass tube.
41. inter_ceptor00 1x 22MM Ti 18350 tube, Ti 18650 tube, 510 cap, 22MM Ti genesis , Ti tank
42. Steaming EMT 1 x 18350 Titanium with the 18650 tube 510cap (cross air channels) and Atty (same as pic 13 what ever is the normal diameter 22mm i guess)
43.Brandall937 - 1x Titanium, 22mm, 18350 plus 18500 tube + Ti Genny + 510 Connector (all Ti)
44. Tripster - 1x Titanium, 22mm (or slimmer if possible), 18650 tube, 510 cap (1 cross air channel), short switch, plain w/o dimples and venting
45. COBRACOMMANDER82 1x 22mm Titanium Mod (without dimples, with 1 x flat top, 1 x air channeled top, 500 tube, 650 tube, with battery vents like on the Precise +, short switch)
46. COBRACOMMANDER82 x 1 Slim Titanium Mod 26650 (without dimples, with cap tapered to 22mm, with 1 x flat top, with battery vents like on the Precise +, short switch)
47. mackievill - 1x Ti 22mm short switch 18350 + 18500 tube (and if possible one extra brass top and bottom cap)
48. Idaholandho 1 Titanium 22mm short switch 18350 & ring or 18500 tube no dimples, 4 sm vent holes
49.
50. klockwood84 Ti 18350 mod with the fancy switch. the rest is dealers choice (and yes I know i skipped one... i like 50 better than 49 )

 

[Idaholandho]

And Crazy Uncle Larzis STILL loves his So much so I sent it off to VapeNShine. Matte Nem now a VW version with a bit of a twist... Justin redid all the Matte portions with some like media blasted kind of Satin and brushed it. Engravings held up fine and it is a thing of beauty.

Ah man, that is going to look so good. Other than the PAPS he just did for me, he also did a GGTS for me and it is beautiful.

whats up with that little brass post in the switch? I get the conductivity reason but, i'd think they could install perm. Had mine for 20 hours and looked for that SOB for 4 more hours in new carpet with a few vacuums. It almost killed muh sale. That was the straw for me.

 

[Joseph0280]

Mac, are all the mods gonna have the dimple on the top cap?

 

[cmacclel]

Mac, are all the mods gonna have the dimple on the top cap?

Only if you want it that way I can do customization on a single level.

 

[Joseph0280]

Sweet. Thanks Mac. I dunno the dimples reminds me of my old provari. Like an x-gf I don't wanna get back with.

I want exactly what you have on your logo Mac. Looks just perfect to me.

 

[negrete35]

Sweet. Thanks Mac. I dunno the dimples reminds me of my old provari. Like an x-gf I don't wanna get back with.

I want exactly what you have on your logo Mac. Looks just perfect to me.

I agree, it IS perfect.

 

[Xobeloot]

Think the first 50 people on the list should get some sort of customization. Name on mod w/ serial... Something special as a "friends" edition gesture.

Or you could just change the logo from a star to an orangutan


Sent from my iPhone using Tapatalk 2

 

[qorax]

Think the first 50 people on the list should get some sort of customization. Name on mod w/ serial... Something special as a "friends" edition gesture.

Or you could just change the logo from a star to an orangutan

I'd be happy if Mac makes it, soon. Whatever iteration it's in - I'd be happy to just grab it

 

[fr0st]

Off topic, Mac did you ever get my PM regarding Cerakote?

 

[Joseph0280]

Mac, is there a time frame on when you'll release the mod? Or the msrp for this mod & atty. just wondering cause i Have to set money aside and save up for this mod.

 

[Idaholandho]

Hope everyone is well today. I must ask, Is the generated list approved and blessed by Mac? Or was it created with a good intentioned, overly excited, testosterone fueled member? Is this a feeler list? As, I have also seen those on forums.

As I am looking forward to the production of, I would only be interested in a list approved by Mac on his terms with his build options. Thanks

 

[negrete35]

Hope everyone is well today. I must ask, Is the generated list approved and blessed by Mac? Or was it created with a good intentioned, overly excited, testosterone fueled member? Is this a feeler list? As, I have also seen those on forums.

As I am looking forward to the production of, I would only be interested in a list approved by Mac on his terms with his build options. Thanks

That would be Qorax.

 

[Idaholandho]

Thanks brother. So has Mac Boss commented or approved the list?

 

[negrete35]

No, Mac hasnt officially commented one way or the other about the list. But he has stated that he never really plans on going "into production" but rather, custom orders. I am sure that there will be some sort of limits to what options will be available. Qorax just started the list to show interest in the mod.

Edit: I do think that Mac will realize the need to focus more on the mod once started. I really think that he has a winner here.

 

[Idaholandho]

Thank you. Mac, I am still very much interested in your work and look forward to moving forward with an order when you are ready to build.

Removing my name off the list #48 until future notice from Mac of potential build specs and list generated on his terms.
Always wishing the best.

THE MAC MODZ "LIST":
1. Qorax : 1 x Titanium, 21mm, 18350 mode (+ Extra 18500 Ring)
2. Ukeman : 1 x Ti, 22mm, 18500 mode
3. curisu : 22mm OD Ti, 18500 (changed my mind)
4. Boxcar: x1 22mm OD 18650, 18500 + Genisis Atomizer. REALLY want the Atty!
5. rbrzezinski : 1x Titanium, 22mm, 18350 plus 18500 tube (ring)
6. Cornolio : 1X ti 22mm short switch 18500 4 vent holes
7. scoopbb : 1x brass 26650, tapered top to 22mm
8. Cavaluchi : 1x Ti 22mm short switch 18350 plus 18500
9. Jcy0001 : 1xeverything including carto tank n Genisis
10. andrebandre : 1xTi 21mm short switch 18500, straight tube, no holes or rings or dimples and a gennie with a flat top and no decorations.
11. me1969 : however you want
12. 80cole : 1 TI and Alum 18500 with genie
13. masguapoakosyo : 1x23mm stainless steel 18500 tube with brass top and switch
14. Bigcypress : mod w/350,500,650 Ti tubes a350 brass tube, genisis, carto tank. Xtra parts
15. negrete35 : hybrid dripper and switch assembly with polished brass plunger. 3 sets of spare parts.
16. negrete35 : slim 26650 mod, Ti cap and switch and aluminum tube. Cap tapered to 22mm.
17. joseph0280 : 22mm mod Ti 18350 + 18500 + 18650 mod. Short switch. + the Atomizer
18. sircharles : 22mm mod Ti 18350 + 18500 Ti tube + 18350 Alu tube + 18500 Alu tube; Ti Carto Tank
19. Sick HP : 22mm mod + TI Top / bottom short switch + alum 18500 tube. just like your avi pic.
20.Jquadz34 - 1x Ti 22mm short switch 18500
21. bris1974 - 1x Titanium 22mm, 350 short switch + 500 tube + genny
22. Bkjeeper-1x Ti 22mm, 18500 short switch + 18350 tube + carto tank
23. rumthin - 1x Ti 22mm short switch 18350
24. Xobeloot: Aluminum 22mm 18350 w/ Ti caps/short switch and additional 18500 ring x1 genesis atty x1
25. Jasl90: full Ti 30mm, 2 tubes (26500 & 2665); no taper on the top cap; short switch with a lock ring if possible. (edited)
26. 9ball_AJ - 1x Ti 22mm short switch 18350 + 500 tube
27. hobbyshaft : 1x Titanium, 22mm, 18350 + 18500 tube, Carto Tank, Genesis and all extras
28. REDXII99 : 1x 22mm 18350 mod. 1 Ti tube and 1 Alu tube
29. CGMST: 1x 22mm 18350. I like the brass tube tho. But I'd be happy with Ti too
30.Atlantisboy 1x 22mm 18350 Ti & Genesis dual airholes equivalent to 1mm draw If possible.
31. anskyboy 1x slim (28-29mm, or just as slim as possible) 26650 mod with cap tapered to 22mm. (just like negrete)
32. tybs_4045 1 x 22mm 18500 Ti(short switch) & Genesis
33. Intelik808. 1x22 18350,18500 ti tubes 510cap, genesis/hybrid, dual coil rda/hybrid
34. Fr0st 1x 22mm 18350 ti
35. Sero 1x 18650 22mm tube, No dimples or holes. Plain design with short button
36. Yuujin 1x 22mm Ti Mod,1x 18350 Ti Tube, 1x 18350 Al Tube with Cerakote coating(if possible),1x Ti Genesis, 2 Set Spares.
37. bk78 1x 22mm Ti 18500 with RDA hybrid
38. kojiro 1x22mm Ti 18500 short switch, 1x18650 Ti tube, 510cap, Ti carto tank.
39. kiba 1 x Titanium, 22mm, Flat Top Cap, 18350 mode (+ Extra 18500 Ring if Possible, or 18500 tube) no dimples or large vent holes if possible plz
40. mickeyklu 1x22mm Ti 18500 (no dimples in top cap) + 18500 brass tube.
41. inter_ceptor00 1x 22MM Ti 18350 tube, Ti 18650 tube, 510 cap, 22MM Ti genesis , Ti tank
42. Steaming EMT 1 x 18350 Titanium with the 18650 tube 510cap (cross air channels) and Atty (same as pic 13 what ever is the normal diameter 22mm i guess)
43.Brandall937 - 1x Titanium, 22mm, 18350 plus 18500 tube + Ti Genny + 510 Connector (all Ti)
44. Tripster - 1x Titanium, 22mm (or slimmer if possible), 18650 tube, 510 cap (1 cross air channel), short switch, plain w/o dimples and venting
45. COBRACOMMANDER82 1x 22mm Titanium Mod (without dimples, with 1 x flat top, 1 x air channeled top, 500 tube, 650 tube, with battery vents like on the Precise +, short switch)
46. COBRACOMMANDER82 x 1 Slim Titanium Mod 26650 (without dimples, with cap tapered to 22mm, with 1 x flat top, with battery vents like on the Precise +, short switch)
47. mackievill - 1x Ti 22mm short switch 18350 + 18500 tube (and if possible one extra brass top and bottom cap)
48.
49.
50. klockwood84 Ti 18350 mod with the fancy switch. the rest is dealers choice (and yes I know i skipped one... i like 50 better than 49 )


Official non-official, official but not officially generated list of 1000's of different combinations of specs that would prove to be very unprofitable for any builder.