Mechanical reos will be seeing some upgrades

Status
Not open for further replies.

Xobeloot

The Dirty Monkey
ECF Veteran
Verified Member
May 29, 2013
4,742
19,792
Grafenwöhr, Germany
Button 1 after 1 week of intermittant vaping w/ fuse mod and brass shimmed firing pin running coils between .3-.5ohm

uda2ysar.jpg


Tiny bit of melt, after picking off the uneven melt patterns, it almost looks to be an "as intended" shape. More to come.

Button 2 after approximately 1 day and one full battery of use. This one is on the stock firing pin w/ fuse mod and a .5ish ohm dual coil build (technically 6 coils - mundy's magic wire)

amuva4et.jpg
there is a teeeeeeny tiny mark, but you have to be searching for it.

This final setup just made me sneeze a lot

gysa9yqe.jpg



Sent from the zoo using Tapatypo 2
 

Xobeloot

The Dirty Monkey
ECF Veteran
Verified Member
May 29, 2013
4,742
19,792
Grafenwöhr, Germany
Out of curiosity; are you using a cotton micro at .6? I've seen posts about cotton not being able to handle sub ohm micro builds?


Sent from my Third Eye using Tapatalk

I use cotton and cotton only. In my super-sub setups (.3-.4Ω), it heats so quickly and stays hot, that of a roughly 3 second toot, the button is only blipped for about 1 second. The last 2 seconds I am just hitting the residual heat and air-cooling the coil.
 

ukeman

PV Masher
Supporting Member
ECF Veteran
Verified Member
Aug 22, 2010
7,718
5,129
Kauai, Hawaii
Redeye Rob-- I'm sure you've seen the "Micro Coil" threads here. It's become quite a phenom... not only among the sub ohms crowd, but once word hits the streets about the "sub ohms Reo" mech mod...

Get ready for a market share event when the upgraded Reo hits the shelf... this is gonna be big. Please have a bunch of Grands on hand.

I predict more b/f rocket rbatomizers will surface as well.

I'm ready for a new Grand myself.

(I'd have preordered one if Rob would've let me)
 

pdib

ECF Guru
ECF Veteran
Nov 23, 2012
17,151
127,511
www.e-cigarette-forum.com
I vape my .4-.5Ω coils normal . . .. 5-6 second button push. The only reason I don't do the multiple puff PBusardo toots these days, is cause Mundy's Magic Wire vaporizes so much juice that one heavy squonk won't last that long. As long as enough juice is present to use up the heat generated in phase change to steam and there is sufficient airflow to moderate the temperature to one's liking . . . . . 's all good.
 
Last edited:

supertrunker

Living sarcasm
ECF Veteran
Verified Member
Oct 12, 2012
11,151
52,107
Texas
i have vaped 36 right out of the bottle, but no rubbing on gums and nose vaping and other weird stuff! HRH's liquid and mine is usually about 18 mg now - it seems to be a level most ex-smokers are comfortable with.

Oh and just a comment on the nose coiling above - watch out for tripwires in Turkistan - they are after the RM2! ;)

T
 
Status
Not open for further replies.

Users who are viewing this thread