miniMax DNA20D

[Visus]

You're looking at $70 - $80 just in parts plus whatever shipping is for those parts.

Without shipping costs:
DNA20D = $50
Case = $6
3 tact switches = $3
Evolv usb charging board = $7.50
Connector/juice well = $2
Frame/cradle = $3.60

Then you have supplies like solder, wiring, epoxy, heat shrink tubing, etc.



You're in the wrong forum. If you want to know who sells mods at ECF and what's available, look in the Suppliers forum.

You left out batteries

miniMax has 2, 1000mAh 15A round nano-tech lipos for a total of 2000mAh, 30A.

The mod is series or parallel? 1000+1000mah=2000mah 15a parallel ///// 2x 1000mah= 1000mah 30a series
Or are they 15c and thats the confusion..

 

[bapgood]

You left out batteries

The mod is series or parallel? 1000+1000mah=2000mah 15a parallel ///// 2x 1000mah= 1000mah 30a series
Or are they 15c and thats the confusion..

Series doubles the volts not the capacity....oh and frys the DNA

 

[Visus]

Series doubles the volts not the capacity....oh and frys the DNA

Its what I asked, I didn't know if the DNA20 could also step down
the way Mamu posted it is in series so its 15c not 15A..
series doubles volts and amperage not mah

 

[bapgood]

Its what I asked, I didn't know if the DNA20 could also step down
the way Mamu posted it is in series so its 15c not 15A..
series doubles volts and amperage not mah

Let me clarify....series add volts per cell so a 3 cell is 3.7v nominal x3. Series does not increase mAh or A. Parallel increase mAh and A.

Amps is calculated by c rating x Ah.....so a 1000mAh or 1Ah 25c battery would be 1x25=25amp constant drain.

 

[lenk]

Thanks lenk!

How did I manage to work inside the box? uhhh... with my fingers, but with this case and its depth my fingers barely, just barely fit, so I pretty much had to use my pinky finger to position parts.

No pics of the internals. But you can pretty much tell what the internal looks like with the way the parts are positioned externally.

Oops, sorry stupid to ask for internal picture. So you just shove everythig in? how about epoxy the buttons and the rest?

 

[Visus]

Let me clarify....series add volts per cell so a 3 cell is 3.7v nominal x3. Series does not increase mAh or A. Parallel increase mAh and A.

Amps is calculated by c rating x Ah.....so a 1000mAh or 1Ah 25c battery would be 1x25=25amp constant drain.

lol

 

[Visus]

Found it better way I could understand it . Thanks for trying bap was still confused. lol
Needed Pictures: So it is correct post 15Ax2=30A woot great news. I thought it was the other way round for a long time now..

http://www.batterystuff.com/kb/articles/battery-articles/battery-bank-tutorial.html

 

[mamu]

To be in compliance with ECF's policy on modding and the practice of modding, I will no longer share my modding knowledge, or share modding tutorials here at ECF.

You all know where you can find me.
Mamu

FOLLOWING ANY OF THE INSTRUCTIONS IN THIS SECTION MAY BE DANGEROUS AND IS ENTIRELY AT YOUR OWN RISK


Modders Advice and Tutorials: Hazards, Warnings, and Rules for Posting
Some members post advice and tutorials on making custom variations of ecigarettes, otherwise known as 'modding', to create 'mods'. Please be advised that these Members do so at their own risk, and following their instructions is also at your own risk.

If not done properly, modding can be dangerous and cause injury should these devices short circuit and explode. For example, only double-protected rechargeable batteries must be used.

ECF does not approve or condone the use of mods or the practice of modding or the following of instructions here by any person. ECF is not advocating the use of instructions posted by any Member. Anyone that chooses to follow any information or instructions contained in Member posts does so at their own risk. ECF reserves the right to remove any posts that it deems to be dangerous but cannot guarantee or confirm in any way that we have removed all (or any) such posts.

Guidelines for Tutorials
Tutorials must advocate safety and should employ the use of protected batteries, switches correctly rated for the expected DC current, lead free solider, properly-gauged wiring, and non-excessive amperages.ECF reserves the right to remove any posts that do not adhere to these rules.

Caution
If you decide to try any Modding, either seen here or devised by yourself, consider carefully if you have the technical skill, and the risks involved. You are strongly advised to take all precautionary measures and be prepared for possible battery shorts or any other issues. You should consider wearing protective equipment such as eyeshields.

Disclaimer
Any information contained in this Forum is acted on at the user's own risk.ECF cannot be held responsible for individuals causing injury or even death to themselves or others by following information in this Forum.

 

[Misty]

Thread closed as per OP request

This disclaimer has been in place for several years - no "new" policies


Every member or guest accessing this forum for the first time see the disclaimer and have the choice to close the notice.
Once they close the notice - it is no longer accessible for view.

FOLLOWING ANY OF THE INSTRUCTIONS IN THIS SECTION MAY BE DANGEROUS AND IS ENTIRELY AT YOUR OWN RISK
Modders Advice and Tutorials: Hazards, Warnings, and Rules for Posting
Some members post advice and tutorials on making custom variations of ecigarettes, otherwise known as 'modding', to create 'mods'. Please be advised that these Members do so at their own risk, and following their instructions is also at your own risk.

If not done properly, modding can be dangerous and cause injury should these devices short circuit and explode. For example, only double-protected rechargeable batteries must be used.

ECF does not approve or condone the use of mods or the practice of modding or the following of instructions here by any person. ECF is not advocating the use of instructions posted by any Member. Anyone that chooses to follow any information or instructions contained in Member posts does so at their own risk. ECF reserves the right to remove any posts that it deems to be dangerous but cannot guarantee or confirm in any way that we have removed all (or any) such posts.

Guidelines for Tutorials
Tutorials must advocate safety and should employ the use of protected batteries, switches correctly rated for the expected DC current, lead free solider, properly-gauged wiring, and non-excessive amperages.ECF reserves the right to remove any posts that do not adhere to these rules.

Caution
If you decide to try any Modding, either seen here or devised by yourself, consider carefully if you have the technical skill, and the risks involved. You are strongly advised to take all precautionary measures and be prepared for possible battery shorts or any other issues. You should consider wearing protective equipment such as eyeshields.

Disclaimer
Any information contained in this Forum is acted on at the user's own risk.ECF cannot be held responsible for individuals causing injury or even death to themselves or others by following information in this Forum.