Mod won't work anymore.
- Thread starter Cf11
- Start date
- th_trl_thread_readers 0
- Status
Does the screen work?
Up/Down Buttons?
Might just be the 510 Connector. Have you tried Other atomizers on it?
Up/Down Buttons?
Might just be the 510 Connector. Have you tried Other atomizers on it?
Yes
Yes
And yes.
The 510 seems fine. There's no dent or scratches on it.
Anything else that could have happened?
I would open the mod and see if any wires broke or came loose at the solder connectors.. I had the ground wire to the 510 come loose on the ipv4 when accidentally dropped it on pavement climbing out of my truck.. resoldered the wire and it's been working perfectly ever since... I hope you get it fixed okay and good luck!
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
I would take the Battery out of the Mod. And then Push down on the 510 Pin to see is it moves. Could be that the 510 Pin is stuck.
Or it could be a Wire has come Loose like smacksy mentioned.
does an atty register on the display?? shows ohms? does your mod display "No Atomizer etc" when button is pushed? If there is a broken wire, it would be the same as no atomizer... did you check the coil for impact damage? If the 510 + post is stuck in the down position, once again there should/would be a No Atomizer warning. If the mod is out of warranty, open it up carfully and check for loose/broken wires, cracked board, cracked SMT ( surface mounted parts) parts. The resistors and capacitors can easily crack making for an open circuit and failure to operate... if it truly beyond repair at least you get to see the internals and learn from it....
another thought.. have you tried powering it down and restarting it?? Remove the batteries let it sit and re-insert batteries and see if it reboots...
I tried that and the 510 seems fine. It's going up and down like it should.
you might look on YouTube but mods are fairly easy to figure out to open by removing a few little screws..
Sent from my XT1585 using Tapatalk
The attys are registering. The ohms are correctly being displayed.
When i press the fire button... Nothing happens.
The positive and negative buttons work properly.
I'm actually using it with goon so the coils seem fine.
I think I'll just try opening it if nothing else works out.
Yes everything works until i press the fire button. Tried it with 2 different batteries.
The screws are doable... I just worry that i might pull a wire in not supposed to.. So a visual demo could help.
just be careful, you should have no issues at all.. but research your particular mod on YouTube and there might be a video available showing how to take it apart.. you can also Google for the same thing.. if I tried to repair a mod and it still doesn't work I would just buy another mod... hopefully one of better quality, lol
Sent from my XT1585 using Tapatalk
Lol... True that.
Will be rolling some bones tonight.
Is something like this covered under warranty?
Lol. My tesla 120 is coming soon
But sadly i don't have a back up so will have to go back to stinkies for a few days. That's why i wanted to make it work somehow.
Lol. My tesla 120 is coming soon
But sadly i don't have a back up so will have to go back to stinkies for a few days. That's why i wanted to make it work somehow.
Tsk tsk tsk...been here since April, bought a Smok product and you have NO back up?
We have failed you grievously.
Please accept our apologies.
IMO: Smok sucks, always have a back up or two, Smok sucks.
If you are in the EU/UK, pm me and I'll send you a pico to use until your tesla arrives.
Good luck
I
man go back to the stinkies ?? I would NEVER do that and I used to smoke carton of Marlboro Reds in a week for 20+ years..Lol. My tesla 120 is coming soon
But sadly i don't have a back up so will have to go back to stinkies for a few days. That's why i wanted to make it work somehow.
I've got to have backups, like these set up in rotation for today
Sent from my XT1585 using Tapatalk
- Status
Similar threads
- Locked
