Modders - Soft touch tactile switch !
- Thread starter Bastage
- Start date
- th_trl_thread_readers 0
-
- Tags
- diy hardware switch
- Status
Here another easy one to mod:
DealExtreme: $4.80 Red Laser Keychain (AAA)
Replace the AAA with a lithium 10440 (the standard cigar battery) and you up and going in no time and no money (4.80$)
DealExtreme: $4.80 Red Laser Keychain (AAA)
Replace the AAA with a lithium 10440 (the standard cigar battery) and you up and going in no time and no money (4.80$)
Have you done it? Pics? How's the battery life? I think with some of these we may be getting back to batteries that aren't big enough for the job. A single AAA is about the same size as a stanard ecig battery, not sure what the mah ratings are on them but AA (14500) or CR123 would be the smallest I would want to go for a modded battery.
Last edited:
Red Laser Pointer Conversion!
Hmmm Interesting. I just opened up a little laser I have.
I have some 10440 Rechargeable Batteries, Nice Fit with Plenty of Room!
I can make a Mini-Magnum!!!
Lets see what we have here:
- Standard 901 Batteries around 180 mAh
- 10440 Rechargable Batteries 500 mAh / 2.75 to 4.2 Volts (Unprotected type)
FYI: All Battery mAh Rating are Not Accurate Unless You Actually Test It!
- Can't use existing switch but can go Mini-Tactile Switch
- Enough room for wiring width wise
- Plenty of head room for the atomizer
- Can make it so that the bottom battery cover is still useable, so the battery can be removed easily to recharge or pop a recharged bat in!
So I would Brand This as the Mini-Magnum
This Easy Mod would give you a Better & Bigger Battery with Twice The Power Plus of a Stock 901 Battery in a Very Tiny Package!
Great Idea! This Looks Good! I will hopefully try it soon!
Hmmm Interesting. I just opened up a little laser I have.
I have some 10440 Rechargeable Batteries, Nice Fit with Plenty of Room!
I can make a Mini-Magnum!!!
Lets see what we have here:
- Standard 901 Batteries around 180 mAh
- 10440 Rechargable Batteries 500 mAh / 2.75 to 4.2 Volts (Unprotected type)
FYI: All Battery mAh Rating are Not Accurate Unless You Actually Test It!
- Can't use existing switch but can go Mini-Tactile Switch
- Enough room for wiring width wise
- Plenty of head room for the atomizer
- Can make it so that the bottom battery cover is still useable, so the battery can be removed easily to recharge or pop a recharged bat in!
So I would Brand This as the Mini-Magnum
This Easy Mod would give you a Better & Bigger Battery with Twice The Power Plus of a Stock 901 Battery in a Very Tiny Package!
Great Idea! This Looks Good! I will hopefully try it soon!
Last edited:
Just be VERY careful with those unprotected Batt's Cellm, I've had a couple incidents now with unprotected CR12's. They are dangerous and will explode if you short circuit for any reason.
My Mini-Stick E-Cig Mod Is Smoking
OK I didn't have time for the Laser, But I Busted This Out In About 40 Minutes or So.
Its Been Cooking Straight for the Last 5 to 6 Hours!
I can add a charger port to it easily but I have a bunch of batts & charger anyways, the back door slides right off to change the battery, and built into the case is a safety On/Off Slide switch. I was going to go shorter, but I like the length. I can put a belt clip on it, use a small cell case I found with a belt clip on it, I can add a lanyard or keyring right to it.
It's super light weight, I will weigh it later, and its very small, look at the ruler.
I can do a lot with this little sucka,change change the atomizer easily and I ended my battery problems!
I just found a little vented chrome emblem that I will cut into the case next. it did not make a difference with the drag or the smoke with the back cover on or off.
This is cheap to make as well! I guarantee it will last longer then any other OE unit out!
You guys keep bustin out those great mods, I love'm!!!
CellMeister
OK I didn't have time for the Laser, But I Busted This Out In About 40 Minutes or So.
Its Been Cooking Straight for the Last 5 to 6 Hours!
I can add a charger port to it easily but I have a bunch of batts & charger anyways, the back door slides right off to change the battery, and built into the case is a safety On/Off Slide switch. I was going to go shorter, but I like the length. I can put a belt clip on it, use a small cell case I found with a belt clip on it, I can add a lanyard or keyring right to it.
It's super light weight, I will weigh it later, and its very small, look at the ruler.
I can do a lot with this little sucka,change change the atomizer easily and I ended my battery problems!
I just found a little vented chrome emblem that I will cut into the case next. it did not make a difference with the drag or the smoke with the back cover on or off.
This is cheap to make as well! I guarantee it will last longer then any other OE unit out!
You guys keep bustin out those great mods, I love'm!!!
CellMeister
- Status
Similar threads
