Mods by Chels - mini-ecig

[rodsky77]

So unusable for most rda's Hence the need for an extension adapter.

There are plenty of other dna40 mods u can use an rda on. But really no others where an RTA is sitting parallel to the battery. I'm sure that an rda extender is made by someone else. They don't have one for the microstick or for the other mech mods they have with the same form factor, and that does not make people buy those mods any less. I just don't see the big issue.

 

[Nautilusfan]

It's really not an issue for me. Something else will probably work better for my purposes anyway. Moving on

 

[FearTX]

It was just a question i will still hunt one of these down. I love the form factor. Other dna mods with this form factor are hard to come by and pricey.


Poasted with my DNA30 Toaster using Sorcery

 

[Nautilusfan]

I really liked the form factor too! I've really gotten away from rta's in favor of rda's and bf'ers. Did some measuring and I see no reason this mod wouldn't work with a taller Rda such as a Vengeance or Vulcan. What you think Fear?

 

[FearTX]

I really liked the form factor too! I've really gotten away from rta's in favor of rda's and bf'ers. Did some measuring and I see no reason this mod wouldn't work with a taller Rda such as a Vengeance or Vulcan. What you think Fear?

I think both are a little too high air flow for Ni200 but would work great with Kanthal. AEOLUS or however that RDA is spelled would probably work really well with it.

The RDA adapter that comes with the brass Phantus mini would probably work really well with it. So would the adapter that people use for the Blackoak and the Stashbox...
anyways, really excited for this device, cannot wait.

On topic and AWESOME I might add, My "Little Donkey"

 

[Nautilusfan]

Very nice!! I really like the form factor. Thanks for the ideas to make this work for me.

 

[rodsky77]

It's really not an issue for me. Something else will probably work better for my purposes anyway. Moving on

It was just a question i will still hunt one of these down. I love the form factor. Other dna mods with this form factor are hard to come by and pricey.


Poasted with my DNA30 Toaster using Sorcery

Eh, sorry, didn't mean to sound like a jerk. I know of only one other mod that's of similar form factor and it costs much more and does not look as good, however, a VS rDNA is about the same cost and works very well with an RDA.

 

[bgoracy]

Hello,

Does anyone know of a cartomizer tank that will fit in the microstick exactly? (17mm OD) I was hoping to get a tank that will not leave any space around it when fit into the microstick. I am looking for a carto tank, not a rebuildable like the spheroid. The closest I have found is the titanide, but that is 16.5mm OD as does leave space around it when inserted. Any material will do as long as it is 17mm OD.

Thanks!

 

[bgoracy]

Has anyone tried the "3.5ml Apollo Dual Coil Tank" in the microstick? It is listed as 17mm OD.

 

[bgoracy]

Sorry the above info is incorrect. The microstick atomizer hole dimension is 16.5mm not 17mm and the titanide is 16mm. So, I am looking for any carto tank with a 16.5mm OD.

Thanks!

 

[Firestorm]

Does anyone know of a cartomizer tank that will fit in the microstick exactly? (17mm OD) I was hoping to get a tank that will not leave any space around it when fit into the microstick. I am looking for a carto tank, not a rebuildable like the spheroid. The closest I have found is the titanide, but that is 16.5mm OD as does leave space around it when inserted. Any material will do as long as it is 17mm OD.

I have some old 3.5ml SMOK DCT XL cartomizer tanks that fit the MicroStick. I don't use cartomizers anymore, but I dug out some of my old tanks to see what would fit. They're very small, plastic, and they don't hold a lot of juice, but they do fit. If I ever decide to revive one of my Atmistique Divers this is what I would use with the MicroStick. They are 15.2mm x 42.9mm.

 

[bgoracy]

Hello,

Does anyone know of a cartomizer tank that will fit in the microstick exactly with a 16.5mm OD?

 

[Firestorm]

Sorry the above info is incorrect. The microstick atomizer hole dimension is 16.5mm not 17mm and the titanide is 16mm. So, I am looking for any carto tank with a 16.5mm OD.

Do you know where to get a Titanide in the US? I don't know that you're going to find a better fit than that. I've seen some Clearomizer tanks that are 16.5mm but not any cartomizer tanks.

 

[bgoracy]

Hello,

I have the titanide already. I ordered it from here...

Titanide Cartomiser Tank - Cloud 9 Vaping

 

[Firestorm]

Hello,

I have the titanide already. I ordered it from here...

Titanide Cartomiser Tank - Cloud 9 Vaping

Yeah, I did a search and saw that Cloud 9 Vaping sells it, but I couldn't find a US reseller. I typically don't hesitate to order something that I really want from overseas, but I'm not willing to shell out a lot of dough and international shipping on a cartomizer tank (been there, done that).

 

[Arnold Ziffle]

I am waiting for a mini drip and a micro big. it's been awhile and curious when they'll be ready

 

[anavidfan]

Yeah, I did a search and saw that Cloud 9 Vaping sells it, but I couldn't find a US reseller. I typically don't hesitate to order something that I really want from overseas, but I'm not willing to shell out a lot of dough and international shipping on a cartomizer tank (been there, done that).

At least when you order from CLoud 9 and go the less expensive shipping choice, you dont have to wait a month or more .........

I have not been able to use my Mini Atty since before Jan 5th...........

I hate to sound critical, and I normally never do a "public" complaint, but my experience with devices from CHels is why I hesitated for a long time buying anything not sold in the US or made in the US.......

My fear was lack of customer service and worry of POSSIBLE technical problems....... Would they automatically blame me?

If I needed a part, would they send it in under a month or 2 and now another 3 weeks because they sent the wrong part......

Lack of standing behind their products...... That feeling that one is buying at ones own risk and if I like a device, would it be updated or discontinued and then not being able to get parts for it in the future.....

I have been using a couple atomizers for over 3 years now and can still get parts and they still stand behind their products. I know that I can have and use these for the rest of my life and they will still work.........

The one atomizer is been around for 5 years? and still the modder makes parts and stands behind it...... It is still just as good as the first day and just as good as anything coming out now.......

Sorry if this sounds like a rant, but I guess it is........... Im very disappointed in MOds by Chels, especially since it IS a great atomizer.

R.I.P. MiniAtty

[/URL][/IMG]

[/URL][/IMG]

 

[LittleDonkey]

When you buy from us, you buy from a factory. It means that you can buy at low price, when the production is ongoing. We try to estimate the production time, but it's not always possible. If you don't want to wait, then it's much better to buy from our retailers or at least items which are in stock. We have several retailers, so you can buy from them, but their prices are nomally higher. A shop can ship items daily, while we at a factory ship only 1-2 times per week. Also shipping from Israel to US takes 2-5 weeks. We cannot control this. So yes, orders from stores instead of a factory are shipped much faster.
It was our fault that we shipping you a wrong insulator. We'll ship you a new one on this week.
Don't give up on the MiniAtty. You'll get a replacement part soon

 

[keepsmiling]

Hello Little Donkey. Is this what I want to replace the switch on an older microstick? Spare parts: button for MicroStick - Mini ECIG

 

[keepsmiling]

That mini atty is stunning anavidfan! I hope you can get it fixed soon.