Mods by Chels - mini-ecig

[callmecletus]

I've tried setting up my MiniGen and not very good luck. I think the biggest issue for me is the small size. If anyone here has found an easy build could you please share via pictures or video. I have it running just not very well.

Iowa Gal, here is the set up I have been using for the past two weeks. 1.5mm coil 7/6 wraps of some twisted 32 gauge I had made up and wanted to try out. Used a piece of snc cotton yarn about 1-1 and1/2 inches long for the wick. Coil came out to 1.3ohms. Has been performing really well.
I made up the coil and installed it using a small screw driver down thru coil and into wick hole to hold in place while I tightened lock screws. Hardest part was threading the wick thru the coil and into deck. I used a needle to poke and prod it into place. I have a hard time dealing with stainless mesh wicks, and really like this set up.

 

[CaliJeff]

In case anyone was wondering just how terrifically compact the microstick is:

 

[Iowa Gal]

Iowa Gal, here is the set up I have been using for the past two weeks. 1.5mm coil 7/6 wraps of some twisted 32 gauge I had made up and wanted to try out. Used a piece of snc cotton yarn about 1-1 and1/2 inches long for the wick. Coil came out to 1.3ohms. Has been performing really well.
I made up the coil and installed it using a small screw driver down thru coil and into wick hole to hold in place while I tightened lock screws. Hardest part was threading the wick thru the coil and into deck. I used a needle to poke and prod it into place. I have a hard time dealing with stainless mesh wicks, and really like this set up.

Thanks I will give that a try tomorrow...you know it took me over an hour to get the screws loose...that didn't help. I will win the battle

 

[Linx8]

Iowa Gal, here is the set up I have been using for the past two weeks. 1.5mm coil 7/6 wraps of some twisted 32 gauge I had made up and wanted to try out. Used a piece of snc cotton yarn about 1-1 and1/2 inches long for the wick. Coil came out to 1.3ohms. Has been performing really well.
I made up the coil and installed it using a small screw driver down thru coil and into wick hole to hold in place while I tightened lock screws. Hardest part was threading the wick thru the coil and into deck. I used a needle to poke and prod it into place. I have a hard time dealing with stainless mesh wicks, and really like this set up.

That's relay good, do you have a link or source to get the snc cotton yarn?


Linx8

 

[chadsmo]

That's relay good, do you have a link or source to get the snc cotton yarn?


Linx8

A life time supply for you and 7 of your friends and family.

http://www.amazon.com/gp/aw/d/B0050FHZAI

Though I'm sure someone will offer to send you some and include you in their own 7 friends and family list. I would but I'm in Canada.

If you buy it get white and boil for 20 min. Don't skimp on the boiling, something magical happens at 20 minutes , not sure what it is but it happens.

 

[xtreme101]

That's relay good, do you have a link or source to get the snc cotton yarn?


Linx8

A life time supply for you and 7 of your friends and family.

http://www.amazon.com/gp/aw/d/B0050FHZAI

Though I'm sure someone will offer to send you some and include you in their own 7 friends and family list. I would but I'm in Canada.

If you buy it get white and boil for 20 min. Don't skimp on the boiling, something magical happens at 20 minutes , not sure what it is but it happens.

I just heard a little voice and it was telling me someone would like some Sugars 'n Cream

Send me a PM with your info and I will get some to you asap.

This is a link to Q's magical 20 minute boiling instructions for S'nC

 

[Iowa Gal]

You're hearing voices again? Thought we cured that

I just heard a little voice and it was telling me someone would like some Sugars 'n Cream

Send me a PM with your info and I will get some to you asap.

This is a link to Q's magical 20 minute boiling instructions for S'nC

 

[Linx8]

I just heard a little voice and it was telling me someone would like some Sugars 'n Cream

Send me a PM with your info and I will get some to you asap.

This is a link to Q's magical 20 minute boiling instructions for S'nC

Thanks for all the help
Pm sent


Linx8

 

[Linx8]

A life time supply for you and 7 of your friends and family.

http://www.amazon.com/gp/aw/d/B0050FHZAI

Though I'm sure someone will offer to send you some and include you in their own 7 friends and family list. I would but I'm in Canada.

If you buy it get white and boil for 20 min. Don't skimp on the boiling, something magical happens at 20 minutes , not sure what it is but it happens.

Thank you that will be my new adventure now


Linx8

 

[xtreme101]

Thanks for all the help
Pm sent


Linx8

@Linx8 ~ S'nC spooled and ready ~ will be in the mail tomorrow

 

[Linx8]

@Linx8 ~ S'nC spooled and ready ~ will be in the mail tomorrow

Thank you in advance
I'll let you know when it arrive


Linx8

 

[LittleDonkey]

We have several Hamorikos left from the current run. We kept them for a while as a possible replacement, but nobody have requested a replacement, so now they are ready to find their owners

We have only 15 mods and several of them we would like to sell to active members of this forum who want to leave a feedback (the remaining mods will go to 3 other big national forums).

It's very important for us to get a feedback not only from well-known (maybe even professional) reviewers, but also from active vapers.
If you're ready to post a feedback with a couple of photos, please send me a PM and we'll arrange it for you.

The expected shipping is on the next week.

The next full run is planned on February, though the date is not settled yet.

Hamoriko was already reviewed by Todd. Seems he likes it

 

[Kataphraktos]

We kept them for a while as a possible replacement, but nobody have requested a replacement

For those wondering about the quality of your work, this is first evidence of feedback.

Also: I love love love my Microstick. I will be buried with it and my Billet Box and my Paps Lux.

 

[Iowa Gal]

I have to agree with the above....I love my MicroStick it's really a hard hitting mod in a little package, perfect for out and about.

 

[SoonerChris]

Can anyone speak to the best non-RBA atomizer for this? Is it the Aspire Mini Vivi Nova?

 

[Conchord George]

Can anyone speak to the best non-RBA atomizer for this? Is it the Aspire Mini Vivi Nova?

I see you're a IBTanked fan. A 15mm IBTanked would fit.

 

[LittleDonkey]

For those wondering about the quality of your work, this is first evidence of feedback.

Also: I love love love my Microstick. I will be buried with it and my Billet Box and my Paps Lux.

You're right, but we try to decide if there is enough demand for it. I believe that Hamoriko is nice little budget mod, which is a good combination. Here is what Chels requested to post on UK vapers for s imilar question:

The first run of Hamorikos was detrimental for me.
It's hard to make a good mod for $50. Hamoriko requires a very good production management.
Hamoriko is not a kind of mod, which I can produce in runs of 50 items for $50.
I can keep the price only if the runs become significantly bigger.
That's why I need to know the demand and I need a high demand.
The store could sell 15 items in 20 minutes, but I requested to sell these 15 items via the forums to get the feedback.
If I won't be able to keep the price, I will not produce more. I don't know now if there will be the next run of Hamorikos.
So those who buy today can be the last.
It all depends on the feedbacks.
Hope it's clear now.

It will sink or swim. The price is good and the quality is good, so I hope that it will be fine

 

[Linx8]

@Linx8 ~ S'nC spooled and ready ~ will be in the mail tomorrow

Got it today thank you and you are the best, I am going to boil it and tray it
Thanks again


Linx8

 

[Iowa Gal]

If anyone is interested in a MiniGen let me know....

 

[Busted knuckles]

If anyone is interested in a kicked microstick, check out this thread.

http://www.e-cigarette-forum.com/fo...217-i-kicked-my-little-donkey-microstick.html

I just wanted to share this with the microstick community.
I warn caution to anyone wanting to do this modification. Please understand how the kick operates Brfore trying this.