Mods by Chels - mini-ecig

[LittleDonkey]

Yesterday night a big yellow digger made a ditch for the cable. All the cabling is now in place and the factory is physically connected to electricity.
On Monday an inspector should come, check that everything is fine, that we follow all the rules and will turn the power on.
Seems that this story comes to a logical end and very soon will finally start the production.
This took almost 2 months by now instead of 2 weeks. Sorry once again for the delays.

 

[Faust1]

No worries LD, your product is well worth the wait! Best of luck with your inspection in Monday!


Sent from my iNest using tarantula legs.

 

[LittleDonkey]

The power is ON!

Now we can start doing our job. Here is the plan.
On Tuesday the compressor will be installed. It's already in place, so we just need to connect it and set it up.
On Wednesday we'll connect all our CNC machines to the compressor and get ready for the production.
On Thursday, we will be good to go.
Thanks to all for your patience and support!

 

[rodsky77]

The power is ON!

Now we can start doing our job. Here is the plan.
On Tuesday the compressor will be installed. It's already in place, so we just need to connect it and set it up.
On Wednesday we'll connect all our CNC machines to the compressor and get ready for the production.
On Thursday, we will be good to go.
Thanks to all for your patience and support!

))))) 10 char

 

[Zbeast08]

Nice!! Can hardly wait much more!! Thanks Donkey for keeping us updated!


Sent from my iPad using Tapatalk

 

[LittleDonkey]

The compressor is ready. All 3 CNC machines are connected to the compressor and we just need 1 day to get them ready for the production.
On the photo below you can see the air compressor system: compressor (left), air receiver tank (center), dryer (right).

 

[Iowa Gal]

I know the wait is hard...but the MicroStick is worth the wait.

 

[yankeebobo]

The microstick will not disappoint. A daily requirement for me.

 

[Newfdog]

The best stealth vaping mod out there IMO. A well made and quality product I may add.

 

[chadsmo]

Well I'm officially a dirt bag… I bought a cloned atty. I decided to grab the new Kayfun Mini clone for my Micro Stick, I'm just barely ok with this because the real ones aren't made anymore and super hard to get. I'm hoping I like it because I just don't find the Spheroid that enjoyable anymore and it's meant my Micro Stick is collecting dust. Nothing against the Spheroid , the airflow just isn't acceptable for me anymore

 

[Vermiform]

Well I'm officially a dirt bag… I bought a cloned atty. I decided to grab the new Kayfun Mini clone for my Micro Stick, I'm just barely ok with this because the real ones aren't made anymore and super hard to get. I'm hoping I like it because I just don't find the Spheroid that enjoyable anymore and it's meant my Micro Stick is collecting dust. Nothing against the Spheroid , the airflow just isn't acceptable for me anymore

I've been looking at that kayfun mini clone as well. I'm holding off on ordering it until my microstick gets here so please let us know how it works out and which place you got it.

 

[serenity21899]

Well I'm officially a dirt bag… I bought a cloned atty. I decided to grab the new Kayfun Mini clone for my Micro Stick, I'm just barely ok with this because the real ones aren't made anymore and super hard to get. I'm hoping I like it because I just don't find the Spheroid that enjoyable anymore and it's meant my Micro Stick is collecting dust. Nothing against the Spheroid , the airflow just isn't acceptable for me anymore

That does fit okay, right? That's what I was planning to do with mine. Budget is a bit tight right now to buy another atty at full price.

 

[chadsmo]

If you google MicroStick Kayfun Mini there are many piciture of them set up together.

 

[chadsmo]

I've been looking at that kayfun mini clone as well. I'm holding off on ordering it until my microstick gets here so please let us know how it works out and which place you got it.

There's two in production now and from what I've read this is the good one.

http://www.angelcigs.com/kayfun-mini-v2-1-rebuildable-atomizer-clone-by-ivogo.html

It only shipped yesterday so I'm guessing it will be about 3 weeks.

 

[serenity21899]

If you google MicroStick Kayfun Mini there are many piciture of them set up together.

Cool, thank you. I'm awaiting my Microstick from the current production batch, but the Kayfun minis are in stock, so I'm jumping on that while we can still get them.

 

[chebird]

There's two in production now and from what I've read this is the good one.

Kayfun Mini V2.1 Rebuildable Atomizer Clone By IVOGO

It only shipped yesterday so I'm guessing it will be about 3 weeks.

Yeah, the Ivogo might be better, I decided to try the Tobeco clone and it works good, I just cant get it to wick right with the clear section so if you care about seeing your juice level than get the Ivogo. I hear about leaking with the Ivogo, but I venture to say leaking has more to do with user error/sloppy on the details namely o-rings, or lack of negative pressure while and after filling.

 

[chadsmo]

We shall see. It was 30$ , not a big deal if it's not great.

 

[LittleDonkey]

Another option is to try the MiniAtty:
MiniAtty (shipping in 30-45 days) - Mini ECIG

Finally we can start working on the prototype. The review will be available before the shipping of the MicroSticks, so if you don't like the review, you would be able to throw it away from the order before it's shipped.
But if you will like it and keep it, then you'll get both at once.

You can add the MiniAtty to the existing order and save on shipping:
Add MiniAtty to existing order - Mini ECIG

 

[Zbeast08]

There's two in production now and from what I've read this is the good one.

http://www.angelcigs.com/kayfun-mini-v2-1-rebuildable-atomizer-clone-by-ivogo.html

It only shipped yesterday so I'm guessing it will be about 3 weeks.

Thanks for the info Chadsmo, looks interesting as I am looking another atty to use with my new extended Microstick when it arrives.i am going to give it a shot as well for 30 bucks!


Sent from my iPad using Tapatalk

 

[Susan W.]

Let us know how it is. Some of the pictures make it look like it's been plated. It's probably just the way the pictures turned out. I still like using my Sophia in my Microstick the best so far. Wasn't that excited about the Gus Aiolos. Want to try a Kayfun mini but they have been out of stock for a long time.

There's two in production now and from what I've read this is the good one.

Kayfun Mini V2.1 Rebuildable Atomizer Clone By IVOGO

It only shipped yesterday so I'm guessing it will be about 3 weeks.