Moving on up...

[johentie]

So i am moving up to my first mod style setup
i bought a vv ego battery at canvape but it's not vv/vw and it's SUPERLONG..
i have decided to go with the Smoktech SiD... i noticed that it comes with a 18650 cover for obviously a 18650 battery..
but i would like to get the 18350 cover for a 18350 battery to make it a little smaller and discrete..
anyone know where i can get these 18350 covers from in Canada? canvape doesn't seem to have any on their site.

also for the battery and charger I am assuming this setup it ok?
Efest IMR18350 10.5AMP Chemically Safe Li-ion 3.7V - battery 18350
Trust Fire TR001 Lithium Ion Battery charger - charger

is it possible to charge these mods via wall charger like the ego batteries?

Thanks

 

[Sarin]

Both the batteries and charger mentioned are ok with this set-up and although the charger is not the best on the market it will competently do the job (i use one of these). You cannot charge this mod via a wall charger like an ego style battery, you have to remove the battery from the mod and put it in the charger - like a normal re-chargeable battery. The battery is know to be tight in the tube and can be an issue to get out:

http://www.e-cigarette-forum.com/forum/e-cigarette-apv-reviews/419466-smoktech-sid.html

 

[johentie]

Thanks for you help...

I made the order..
got a GOLD smoktech SID
got a GOLD 18350 battery tube for the smoktech SID from the US .. 18350 size replacement battery tube for Smok SiD APV
got a 18350 and 18650 battery from canvape
got a wallcharger for the mod batteries
picked up a kangertech protank 3 as well ; >

 

[Talyon]

Thanks for you help...

I made the order..
got a GOLD smoktech SID
got a GOLD 18350 battery tube for the smoktech SID from the US .. 18350 size replacement battery tube for Smok SiD APV
got a 18350 and 18650 battery from canvape
got a wallcharger for the mod batteries
picked up a kangertech protank 3 as well ; >

I assume u got a battery charger as mentioned in your first post, and that it doesn't require a separate wall charger. It comes with a cable to use with it.

Also when u can, do get extra batteries as backups.

The Kanger is a nice little unit.

Next step I'll suggest an SVD or MVP, and a KFL.

 

[johentie]

I assume u got a battery charger as mentioned in your first post, and that it doesn't require a separate wall charger. It comes with a cable to use with it.

Also when u can, do get extra batteries as backups.

The Kanger is a nice little unit.

Next step I'll suggest an SVD or MVP, and a KFL.

yes i got the exact one from the first post ; >
i will get back ups for sure... for now i have my ego-vv and kanger batteries..

i'm just trying to find a way to make my juice taste the way it should... i thought the Aspire ET-S would be good but i dunno for some reason i cannot taste anything.. maybe the Kanger protank 3 will be good

maybe my Voltage is too high .. i have it at 4.3v and i don't taste any of my Jugheads juice... maybe i have vapors tongue or something..

 

[Nautiboy1279]

yes i got the exact one from the first post ; >
i will get back ups for sure... for now i have my ego-vv and kanger batteries..

i'm just trying to find a way to make my juice taste the way it should... i thought the Aspire ET-S would be good but i dunno for some reason i cannot taste anything.. maybe the Kanger protank 3 will be good

maybe my Voltage is too high .. i have it at 4.3v and i don't taste any of my Jugheads juice... maybe i have vapors tongue or something..

What ohm coil setup are you using?

 

[johentie]

What ohm coil setup are you using?

i'm a newb.. and i asked and researched... and i came to the conclusion there was none and it came to people's preference..

I have an Asipre BDC ET-S clero .. the only option the place i got it at had was 2.1Ohms

should i be using a 1.8ohms? i asked in another thread in the clero section and no one responded haha

 

[Nautiboy1279]

What I would do when I used to use Aspire BDC's was to first drip a few drops directly into the top of the coil which is that round piece that screws into the bottom cap with the clear rubber doughnut. Then put your liquid into the tank and screw it all together. It should be a nice strong flavor at that point. If it starts to fade, either add a few direct drops again after a while, OR take a few pulls without firing which should draw some more liquid into the outer coil canister wicking system without burning any liquid off. Your problem may be that enough liquid aint getting into your coils.

In terms of ohms, lower may not be good for you in this case, because it will get hotter much faster. But if you can figure out your flavor dilemma, and one of the above suggestions work, the 1.8 will produce more vapor without a doubt. Especially if your using a standard PV and not a variable voltage/wattage unit. I mean either way it will, as it is producing more heat due to the lower resistance.