Status
Not open for further replies.

Chas_L

Super Member
ECF Veteran
Aug 26, 2013
325
624
80
Buchanan Ga
uh oh. am I gonna need to order an adapter....I have the vamo-2 coming and I use mostly all T3 and EVODS !!!! I thought I read it was NOT a problem with the Vamo-2 only the # 1.... now I'm confused

Vamo 2 and Vamo boh have sae threads which are510 and Ego. Both of mine are used with Evods, T3S ,AROs and a mix of slim (small dia. )carto tanks.

I like the display on the V2 better as it is easier to see especially in sunlite but I like the removable top ring on the Vamo 3 which make it possible to remove it and thus unscrew Evods and such using thier base instead of thier tank section. Most know that they have a habit of the tank unscrewing from the base and making a mess unless held upside down during removal.
 

Steakjuice

Senior Member
ECF Veteran
Aug 19, 2013
167
222
Toronto, ON Canada
i consider canada a colder version of the U.S., but without so much violence. :p
Also, replace Latinos and African-Americans with Indians/Pakistanis/Srilankans and Chinese. :p

Just placed my order for Hawk Juice, Guava, and Butter Pecan. I'm not expecting to get a freebie, but I asked for Cinnamon Roll anyway. :)

Can't wait to try these. Getting a little tired of my current juices and Canadian vendors just don't offer the same value.
 

Ride394

Senior Member
ECF Veteran
Verified Member
Aug 27, 2013
241
249
Oxford, NJ
Well this is a MVB Thread and they carry what you need .

Edit sorry missed the not wanting 256 ml part ,however their price for such is only $30 which is sttill a greal bargin

USP grade propylene glycol, USP grade vegetable glycerin. The highest quality Propylene Glycol and Vegetable Glycerin on the market

The 256ml is a little much for what I need at the moment, plus I have spent quite a bit in the past few weeks. The wife is cool with it, but I don't want to push my limits as I try to keep my weekly spending on the low side and this week i've already shot that outta the water lol.
 

Chas_L

Super Member
ECF Veteran
Aug 26, 2013
325
624
80
Buchanan Ga
I think that is what I did to that V-life Max I had gotten, which actually killed it, but not real sure if that was the case or not and I see no way of fixing it. I believe it was a clone (knock-off) of the Zmax.

If the cente contact is pushed down due to over tightening ,remove the battery or turn of the device ,tak a small flat blade srewdriver and gently pry the contact up. Light pressure on the side of the connector andwork your way around it while prying up.

My wife still uses some 808 automatic batteries and carts and I am allways having to adjust those.
 

Stoneface

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2013
9,022
51,561
New York
The 256ml is a little much for what I need at the moment, plus I have spent quite a bit in the past few weeks. The wife is cool with it, but I don't want to push my limits as I try to keep my weekly spending on the low side and this week i've already shot that outta the water lol.
I'm sure you could order 15ml of unflavored from MBV for $5.99 (the cost of flavored juice) if you called them. But if you compare the cost of that 15ml bottle versus the 236ml bottle, it is much more cost effective to order the larger bottle. If you plan to do more DIY in the future, it really is worth buying the large bottle now so that you won't need to keep ordering nic base in the future. Some people even vape the unflavored nic as well. :2c:
 

Ride394

Senior Member
ECF Veteran
Verified Member
Aug 27, 2013
241
249
Oxford, NJ
I'm sure you could order 15ml of unflavored from MBV for $5.99 (the cost of flavored juice) if you called them. But if you compare the cost of that 15ml bottle versus the 236ml bottle, it is much more cost effective to order the larger bottle. If you plan to do more DIY in the future, it really is worth buying the large bottle now so that you won't need to keep ordering nic base in the future. Some people even vape the unflavored nic as well. :2c:

Yeah I definitely agree on the savings part and for future use. Maybe i'll just hold off and order the big one in a week or 2. I have plenty enough juice now to last me a month or so.
 

BigLebowski

Super Member
ECF Veteran
May 17, 2013
868
2,145
42
Clearfield, UT
I just ordered Six 30mL of juice that is estimated to Arrive tomorrow. I got Bubblegum, Rootbeer float, zebra gum, cinnaroll, Mudslide, Cinnamon red hots. I never tried any of these except for the Mudslide I found very tasty. I got them all with 2 flavor shots. Hope I didn't over do it. but I got a sweet tooth so I think I will enjoy them if they are as tasty as the mudslide. I cant wait, My new mod should be here tomorrow aswell and some tanks. I feel like a child waiting on Christmas eve for Christmas morning lol

I like Root Beer Float better than the Root Beer, both are spot on. Mudslide is a coil/wick gunker, even in a RDA I had to dry burn every couple of days.
 

cocacola31173

Ultra Member
ECF Veteran
Verified Member
Nov 7, 2012
2,993
3,992
United States
The 256ml is a little much for what I need at the moment, plus I have spent quite a bit in the past few weeks. The wife is cool with it, but I don't want to push my limits as I try to keep my weekly spending on the low side and this week i've already shot that outta the water lol.

From what I see here Baker Vapor E Juice - Mt Baker Vapor - Electronic Cigarettes you can buy any size...there is a unflavored option in the drop down menu to select flavors.
 

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
My Cinnamon Red Hot (18 mg/ml, 50/50 +2) is still inducing coughing on inhale. It also separates into two layers in my Protank2.

Any suggestions on how to fix this liquid? Maybe mixing some unflavored into it? Also, how to save it from separating?

Anyone else have experience with this flavor? Maybe I should have ordered at max VG with no added shots?

A little ethyl maltol should calm it.

shake shake shake shake shake shake shake your bottle shake your bottle
 

Joie

Ultra Member
ECF Veteran
Verified Member
Apr 7, 2012
2,094
7,983
Illinois
Do you have rugs or hardwood floors?

Really though, if you're careful with it it won't be an issue.
Thread carefully, don't drop it, don't hit people over the head with it too hard...

I haven't had a problem with the threads and actually made the threads on the used one I got somewhat better.

If you get an adapter and don't crank it in too far you'll have zero problems with the ego threads.
Adapters don't use them, they use the 510 threads.
If you don't use an adapter and you screw up your ego threads you can still get an adapter to use the 510 threads.
------------------
Hardwood ....but living room is carpet....so if I ONLY vape.....NO THAT AIN'T HAPPENING.....ok I will just have to be careful. Haven't dropped any of the EGO's after almost 2 years on anything except carpet...so murphy's law....well you know what that means.
So in other words.....an EGO IS 510 is that correct?
 

Joie

Ultra Member
ECF Veteran
Verified Member
Apr 7, 2012
2,094
7,983
Illinois
X-ice is my favorite! Just ordered 50ml yesterday and 15ml of the flavor extract lol. Let me know if you really want to trade, I have a few flavors sitting in my waiting to trade stash.

sure...I will trade....what ya got in the trade closet?:)
PM me and we can trade something I am sure.
 

Joie

Ultra Member
ECF Veteran
Verified Member
Apr 7, 2012
2,094
7,983
Illinois
Vamo 2 and Vamo boh have sae threads which are510 and Ego. Both of mine are used with Evods, T3S ,AROs and a mix of slim (small dia. )carto tanks.

I like the display on the V2 better as it is easier to see especially in sunlite but I like the removable top ring on the Vamo 3 which make it possible to remove it and thus unscrew Evods and such using thier base instead of thier tank section. Most know that they have a habit of the tank unscrewing from the base and making a mess unless held upside down during removal.

Ahhhhh...upside down for sure....thanks:2cool:
 

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
------------------
Hardwood ....but living room is carpet....so if I ONLY vape.....NO THAT AIN'T HAPPENING.....ok I will just have to be careful. Haven't dropped any of the EGO's after almost 2 years on anything except carpet...so murphy's law....well you know what that means.
So in other words.....an EGO IS 510 is that correct?

Ego has 510 threads inside the hole and ego threads outside. So does Vamo.
 

pcrdude

Moved On
ECF Veteran
Jan 20, 2013
914
1,740
A little ethyl maltol should calm it.

shake shake shake shake shake shake shake your bottle shake your bottle

I don't have any ethyl maltol, but I do shake the bottle vigorously before putting into the protank 2 (where it separates by the next day). If I shake it every day, will it somehow, eventually, keep from separating?

Will this juice 'come together' over time?

Thanks in advance for your help!
 

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
Vamo 2 and Vamo boh have sae threads which are510 and Ego. Both of mine are used with Evods, T3S ,AROs and a mix of slim (small dia. )carto tanks.

I like the display on the V2 better as it is easier to see especially in sunlite but I like the removable top ring on the Vamo 3 which make it possible to remove it and thus unscrew Evods and such using thier base instead of thier tank section. Most know that they have a habit of the tank unscrewing from the base and making a mess unless held upside down during removal.

You shouldn't be screwing evods into your vamo tighter than your evod tank to it's base.
I see from your advice on fixing the contact with a screwdriver that you know why.

people
Tanks only need to make contact with the center pin,
they shouldn't be cranked all the way or they'll push that center pin down in.
 

Joie

Ultra Member
ECF Veteran
Verified Member
Apr 7, 2012
2,094
7,983
Illinois
Now I am going to have to try this cotton ball thing for flavor wicks. I have been using the silica and it is ok....but read a lot about might be problems down the road....so might give it a try.
I did try the peaches and cream yarn....YUK did not like the taste of that !!!!
I only replace the flavor wicks and don't rebuild my own coils....I don't have meters and stuff....so I just dry burn them and still get a few months use out of them....so for about $ 1.95 that is fine with me. Hell-of-a-lot better than the $ 350 a month I spent on stinkies!!!
 

Kevo56

Senior Member
ECF Veteran
Jun 16, 2013
95
253
Sunnyvale, CA
Ride394, MBV sells unflavored nic in smaller quantities. The very first selection under Nicotine Juice is "Baker Vapor E Juice" and it gives you drop-down menus for flavor, nic strength, blend, bottle size, and flavor shots. I had a hard time finding it too, but MnLA pointed me in the right direction. :thumbs: I just ordered some last week.
 

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
I don't have any ethyl maltol, but I do shake the bottle vigorously before putting into the protank 2 (where it separates by the next day). If I shake it every day, will it somehow, eventually, keep from separating?

Will this juice 'come together' over time?

Thanks in advance for your help!

Shaking helps the steeping process so shake it every time you think of it. .
It should stay together in time but shake it anyway before adding.
I shake every bottle before adding any to a tank even 5 month old juice.
 
Status
Not open for further replies.

Users who are viewing this thread