My Experience with "Provari mini + Prive Cartomizer Tank"

[tooBerk]

Hi folks,

After months of reading your great comments & walkthroughs, i've decided to share my little but delightful experience.

I've done spending a lot...i mean a lot. Ego-C, Ego-T, Stardusts, Vision Stardusts, Biansi iMist v1, iMist v2, Vivi Nova v1, v2.5 and some gift stuff that being sent from the esteem suppliers. (yey! )
BUT;
Never fully satisfied. I mean first couple of days were almost fine with all products (except some faulty ones). But after days pass, problems always occur, always. Wicking problems, leaking problems, resistance problems etc etc... you know better than me.

Lastly, ı've met with Boge 510 low resistance Cartomizers. OMG, thing always missing were all here. Its perfect. Really awesome. Its been a month. I'm on my 2nd boge cart. I LOVE IT.
The only issue i've had was, one time i put a very thin juice and it leaked... very bad

Here is some photos i tried to edit nice to share with you. All are optimized and details explained.

Please tell me what do you think about these. CHEERS and MERRY CHRISTMAS TO YOU ALL!!!...

PS
Greetings to PBusardo for his great greaat reviews and informations.
Greetings to Scott from E-Cig-Review.com for infos and amazing vape techniques.
Greetings to Kir Fanis for his awesome designs on cartomizer tansk.
Greetings to gr-modders.com for neat service.
Greetings to vapo.ro for their continous and ultra fast service.


So here is the stuff most of you already know but there comes the list for the new comers. Hope you enjoy.

Provari Mini (battery) + Cone for Tank + Prive Cartomizer Tank for 35mm Cartos + Black metal drip tip + EGO battery 650 mah.
Please also note that, standart Cartomizers 35mm and Prive tank here used holds app 2-2.5 ml juice.
I love the standart size BOGE cartomizer 35mm. (low resistance 2.0 ohm - 2.2 ohm )
Provari setup in home and ego battery setup is for outside (stealth?)

 

[Baditude]

Thanks for sharing. That is a beautiful tank.

I assume you are aware that the plastic tube of this tank is made of polycarbonate plastic. It is not safe to put certain flavors (such as cinnamon and acetic/citris flavors) in this tank or the plastic may crack or melt. Just a heads up.

Glad to know that you have found your perfect setup. I think I found mine with the full size Provari with the extension cap (for the larger battery) for home, and a Smoktech variable voltage Gripper for out-and-about. It's about the size and shape of a small pack of cigarettes so it is easy to put away in a shirt or coat pocket. Also it hides well inside of a cupped hand for stealth vaping at work. It uses an 18650 battery for all day use, and was only $50.

View attachment 163572View attachment 163573View attachment 163574
IBTanked pyrex tanks on my BB and Provari. Variable voltage Gripper.

I love my pyrex glass cartotanks. The slim models (19mm diameter) offered at IBTanked are the same diameter as the Provari. The glass tubes are immune to the bad effects of some juice flavors and are extremely durable. Only $20, you can buy three of these tanks for the price you paid for the Prive.

 

[tooBerk]

Baditude i'm fan of your comments. Read a lot. Its nice to see you in this post.

I'm aware of that risk yes, thanks. Gr-Modders warned too. Frankly i'm very carefull with the juice stuff. No problems at all. (knocks on wood)
On the other hand...
I would love to buy pyrex glass tanks IF ONLY gr-modders or Kir Fanis sell them. +++

cheers mate,

 

[Baditude]

Baditude i'm fan of your comments. Read a lot. Its nice to see you in this post.

I'm aware of that risk yes, thanks. Gr-Modders warned too. Frankly i'm very carefull with the juice stuff. No problems at all. (knocks on wood)
On the other hand...
I would love to buy pyrex glass tanks IF ONLY gr-modders or Kir Fanis sell them. +++

cheers mate,

Thanks for the kudos.

I'm a fan of the workmanship and machining involved with the primo mod makers. But for the life of me, I don't understand why they make such fine stainless steel or titanium endcaps if they are only going to finish them off with a tank tube made from $4 polycarbonate plastic? Tanks this finely made need to be topped off with pyrex glass tubes.

It can't be that the pyrex will add that much more to the final cost of the tank. IBTanked glass tubes are $5-7 each, and these are high quality pyrex.

 

[tooBerk]

Agreed. I've sent the link of this post for gr-modders. Hope they read and consider pyrex option with tanks. They do sent test tank and spare tanks though with really high quality. But when it comes to glass, nothing beats.
+++

 

[tj99959]

However I've been using the same polycarbonate tubes for over a year and a half, and have never had a problem with them. So go ahead and enjoy that nice looking tank you have. As long as you know what flavors you can't use in it you won't have a problem.

Nice looking Provari BTW (or is it a Provarmini)

 

[synthacide]

dude nice to you know of any in stock US distributors?

 

[Baditude]

dude nice to you know of any in stock US distributors?

Only US distributor that I've seen for the Kir Fanis tanks is avid vapor, and I've not seen them in stock for months.

Kir Fanis Mods - Cartomizer Tanks - Avid Vaper

 

[tooBerk]

GR-Modders just finished their stock on " Prive Tank ". But there are other versions of tanks there. Just go to their web site and check.
Hopefully new stock for prive tank will come soon.
+
The problem is, i'm having difficulty finding Boge 510 standart cartomizers (35mm) in low resistance.

 

[tooBerk]

Need a reliable supplier who sells Boge 510 regular size - low resistance in EUROPE.

any help really appreciated, thnx.

 

[Caridwen]

Nice looking setup you have there! Best of luck with it!

 

[jkim5708]

Hi folks,

After months of reading your great comments & walkthroughs, i've decided to share my little but delightful experience.

I've done spending a lot...i mean a lot. Ego-C, Ego-T, Stardusts, Vision Stardusts, Biansi iMist v1, iMist v2, Vivi Nova v1, v2.5 and some gift stuff that being sent from the esteem suppliers. (yey! )
BUT;
Never fully satisfied. I mean first couple of days were almost fine with all products (except some faulty ones). But after days pass, problems always occur, always. Wicking problems, leaking problems, resistance problems etc etc... you know better than me.

Lastly, ı've met with Boge 510 low resistance Cartomizers. OMG, thing always missing were all here. Its perfect. Really awesome. Its been a month. I'm on my 2nd boge cart. I LOVE IT.
The only issue i've had was, one time i put a very thin juice and it leaked... very bad

Here is some photos i tried to edit nice to share with you. All are optimized and details explained.

Please tell me what do you think about these. CHEERS and MERRY CHRISTMAS TO YOU ALL!!!...

PS
Greetings to PBusardo for his great greaat reviews and informations.
Greetings to Scott from E-Cig-Review.com for infos and amazing vape techniques.
Greetings to Kir Fanis for his awesome designs on cartomizer tansk.
Greetings to gr-modders.com for neat service.
Greetings to vapo.ro for their continous and ultra fast service.


So here is the stuff most of you already know but there comes the list for the new comers. Hope you enjoy.

Provari Mini (battery) + Cone for Tank + Prive Cartomizer Tank for 35mm Cartos + Black metal drip tip + EGO battery 650 mah.
Please also note that, standart Cartomizers 35mm and Prive tank here used holds app 2-2.5 ml juice.
I love the standart size BOGE cartomizer 35mm. (low resistance 2.0 ohm - 2.2 ohm )
Provari setup in home and ego battery setup is for outside (stealth?)


View attachment 163557 View attachment 163558 View attachment 163559 View attachment 163560

Nice setup...i just gotmy mini on a nova...but looking to get some more flava.. Just ordered a ata-t genesis clone. For only 20 willing to give a shotat a ss wick...if that dontwork outwill try cart/tank sytstem

 

[tooBerk]

jkim5708, thanks for the comment

I like vivi novas too. I've got plenty of them. BUT after meeting with this boge regular low resistance cartomizer, they went to the drawer lol.
You have to try these. +++

 

[GreekLion]

Look up Bogegate when you get a chance, you may want to diversify...

 

[Shenton]

The prive just loook so sexyyy......

 

[tooBerk]

The prive just loook so sexyyy......

exactly! just ordered my second one for backup. (standart size again)
It looks beautiful on everything, provari, ego batt, etc..

 

[Shenton]

Love the prive so much, but then i just love genesis setup right now.. not going back to carto anymore

 

[Sisq0]

Need a reliable supplier who sells Boge 510 regular size - low resistance in EUROPE.

any help really appreciated, thnx.

Try Vapists Vapourizers. They sell Kir Fanis stuff as well.

p.s.
You must get a Zantos drip tip for the Prive tank. The combination looks awesome.

 

[tooBerk]

thanks...
Also i've got a lot of drip tips goes well with that setup. Zantos look good but not my type.
Ordered new stuff and looking forward to the mail )
I need many boge cartos... regular size 35mm. Hard to find, lol

 

[dorit124]

I got my new Prive-Special tank by Kir Fanis - it available on Gr. Site... Yessssssssssss