Yep, that sale includes the RBFS line! You may want to consider going 30s with the new pipes, they're that good
A little birdy also told me there will be new cigar NETs added soon.
Natural Tobaccos - Part Deux
- Thread starter luceblueboy
- Start date
- th_trl_thread_readers 0
- Status
A little birdy also told me there will be new cigar NETs added soon.
I used to check the FT new releases fairly often, but there was a large gap when I wasn't buying hardware or keeping up with the new releases. I thought I would browse them to see what's new but there's like around 900 mechs alone now (nope, not an exaggeration). Just crazy, was only a handful of decent mechs at FT just a year ago.Not if you check it on a daily basis, and catch them as they are released.
At least a pretty large chunk of the new releases have been the latest fad this year, mods meant for 26mm batts. Those I easily ignore; I don't have a desire for bigger mechs and more battery sizes to keep track of.
If that's the case I should be able to compensate by building my Magma with a little higher resistance if the TH is too much with my regular set-up.
I knew I shouldn't have done it, but I went ahead and did it anyway. Loaded up Admirals Pipe from RBFS in a KFL about 1/2 hour ago. Now I can't put it down and go to bed. 
Brian has hit some really serious notes with these juices..
Every one of them that I've tried so far seem to be really solid vapes.
BTW, the Nest style cotton wick that I was using with KillRY4 was dark brown, and there was some gunking on the coil before dry burning, but considering that I put almost 8 ml of it through the KFL before changing it out, it was perfectly acceptable to me.
Brian has hit some really serious notes with these juices..
Every one of them that I've tried so far seem to be really solid vapes.
BTW, the Nest style cotton wick that I was using with KillRY4 was dark brown, and there was some gunking on the coil before dry burning, but considering that I put almost 8 ml of it through the KFL before changing it out, it was perfectly acceptable to me.
This one: $10.61 Full Replacement Tank for 30mm Kayfun Lite / Kayfun v3.1 ES - stainless steel + PMMA / black at FastTech - Worldwide Free Shipping
No idea, honestly. If I can get 6 airholes on a kayfun, I'll look into what it takes to do so (obviously sans drill press).
---------------------------
Dusty_D said:
So that's why it went from "ships next day" to "ships in 7 days".
I'd get one of the other ones, but I don't want to deal with O-rings.
....fine, I'll settle for the SS & Copper AFC.
I like copper....as long as it's actually copper. The type that tarnishes and turns out to be copper-coated something else, I dislike.
(EDIT: Ok, so it appears to actually be copper.
I ended up finding this coil wrap calculator in the discussions page for that specific model.
-----------------------------
Also, the whole cash-in-mail thing was a joke.
I hope nobody took me seriously on that one.
However, I don't think he wouldn't accept it as a form of payment. It's just....how do you guarantee it gets delivered?
I mean, you can send it via Certified Mail; no idea what the additional cost would be to do so.
I certainly wouldn't just stick it in a plain ol' envelope and mail it, that's for certain. I'm not that confident in my luck.
If I personally were to send someone cash, it would probably end up delivered to the wrong address and I'd be sitting here
my mistake.I guess I'm saying, if you're going to send someone cash, pm me for contact info.
I'm always accepting donations.
j/k, seriously.
...Except for the donations part. You can send those my way.
Last edited:
Yup, I am also a primer puffer. Nowadays it's to enjoy that initial whiff of flavour from the puff and out of the enjoyment of seeing the vapor.
The habit definitely goes back to thee atelier days of vaping when primer puffs were sometimes essential with cartomizers and attys. it stayed with me ever since.
Sent from my iPhone using Tapatalk
Dusty, I had well stepped bottle of Count Caramel Mr. Mann sent me and it was very good. I will probably order more as it was not to sweet and had a well balanced flavor IMHO.
Yeah, it is the one i was thinking off. These won't fit normal KFL's. They are 30 mm in diameter. Also the air holes are on the tank section ? How will that work, aren"t they supposed to be on the building deck section ? A little confused.
Dusty, I had well stepped bottle of Count Caramel Mr. Mann sent me and it was very good. I will probably order more as it was not to sweet and had a well balanced flavor IMHO.
I like CC too, and all of the juices are steeped around 3 months at this point. It's just that I like the others more so far. Mind you, I've not had CC in the KFL yet to figure out how well it does in there.
Take a look at the the threading on the air ring, then look at the base for the 30mm Kfun. http://i2.wp.com/vapingcheap.com/wp-content/uploads/2014/06/30mm-Kayfun-Lite-PMMA.jpg It appears the base would thread into the inside of the air ring and the ring's airholes would drop down over the base's air holes. I don't see how that could not increase the diameter of the Kfun, but FT says the ring is only 30mm. Plus, I don't see how 6 holes would do anything for additional air flow as your still using the Kfun base's air system. Go figure.
Yeah i did see the threads but i still don't get it, unless it's a specific kayfun that this is a replacement tank section for ? One that the base's ait system somehow aligns with these six air holes ?
I don't get it either, hence "go figure". Maybe the reason for six holes is to increase the chances of aligning one of them up to the base. I don't see how else that tank would fit the base and what would be the reason for adding more diameter to the unit? How big is "too big"?
Correct me if I'm wrong, but wasnt this originally marketed as for a 22mm KF and turned it into a 30mm? The whole tank screws down over the original base.. Look at your KF. This screws down onto the bottom tank threads. The skirt with the airholes fit over your KF base. There is just enough room between this tank and the KF base to provide air from the 6 holes to your KF airhole (small gap)..
Someone just screwed up in the description.. again.
Last edited:
Found it... there is a 'clear' one in a separate section on FT that I saw before that has the description... $10.61 Full Replacement Tank for 30mm Kayfun Lite / Kayfun v3.1 ES - stainless steel + PMMA at FastTech - Worldwide Free Shipping
Its called a CONFUN. Though FT's version looks much better and has the air holes....
Here:
Granted, it would look stupid on a 3.1, but it works good with a KFL.
Its called a CONFUN. Though FT's version looks much better and has the air holes....
Here:
Granted, it would look stupid on a 3.1, but it works good with a KFL.
Last edited:
And here's the SS version of the PMMA one in the video: $12.40 The "ConFun" Tank Accessory Kit for 30mm Kayfun Lite - stainless steel at FastTech - Worldwide Free Shipping
Correct me if I'm wrong, but wasnt this originally marketed as for a 22mm KF and turned it into a 30mm? The whole tank screws down over the original base.. Look at your KF. This screws down onto the bottom tank threads. The skirt with the airholes fit over your KF base. There is just enough room between this tank and the KF base to provide air from the 6 holes to your KF airhole (small gap)..
Someone just screwed up in the description.. again.
yeah, makes sense. i suppose the air ring isn't making contact with the the outer diameter of the 22mm kayfun base, otherwise what's the guaranty that one of those holes will align with the air flow hole of the base. if anything, i would say it actually restricts air flow to the base.
The hand truck to carry it around with... they've yet to come up with something fashionable.
Any new information on TSNAs or other harmful stuff in home-extractions? I've tried searching around and can't find much. Was thinking of extracting some good cigars since I ordered a ton of pg/nicotine today.
- Status
Similar threads
- Locked
- Locked
