Hey fellas, I've had the revenger x for around a year now and have only just started thinking about using the TCR modes on the device. Could somebody please explain how exactly the 'TCR set' works?. I put a Freemax mesh pro 2 tank on the mod recently and it comes with SS904 mesh coils 0.2 ohms that run between 60-90w. The 4 digits in the TCR setting screen mean absolutely nothing to me haha, if someone can please explain how it works and how I should set it for my rig I would truly appreciate it.
Need help with TCR setting
- Thread starter Liam Dowell
- Start date
- th_trl_thread_readers 0
- Status
Hello @Liam Dowell, what exactly are the numbers showing on your screen when you select set TCR?
From there hopefully we should be able to come up with some good ideas.
From there hopefully we should be able to come up with some good ideas.
So when I go into VT mode there are a few different options for the coil material such as stainless steel, nickel ect. When I go into stainless steel there are a few more sub-settings those being 'TCR set' 'Power set' and 'CCT set' I understand what the others do and how to use them, but I don't understand the TCR set
Tcr stands for temperature coefficient or resistance. It tells the mod how much change in temperature affects the electrical conductivity of the coil. As I understand it, the TCR for a coil made of ss904 is 0.00077 where as most SS coils use the setting of 0.00092 to 0.00105. it if I'm reading your screen correctly, it's showing a tcr value of 0.00100, as it's displaying 0100
Try 0073 to 0074 for the TCR setting, as that's the TCR range for SS904L.
Set temperature to 250°C.
And then you're just left with adjusting the wattage for the coil used.
Set temperature to 250°C.
And then you're just left with adjusting the wattage for the coil used.
- Status
