- Status
one more thing iv noticed about the clone is today I was going to clean my switch and I have the magnet upgrade in my switch when I went to take it out with my flat head screwdriver the magnet just popped on the screw driver and pulled out of the base, I thought this weird because with my real nemesis I have to pry it away from the base because the magnet is so strong, I then tried to put the magnet on the tubes of the mod and it would not stick to them so I put it on the real mod and it latched right on, so For some reason the clone is not very magnetic
Just different stainless, Stainless steel for food is (usually) not magnetic, Stainless steel for knifes and weapon is magnetic. For me it is even better if it is not magnetic. Mine is still not sent from FT 
Just different stainless, Stainless steel for food is (usually) not magnetic, Stainless steel for knifes and weapon is magnetic. For me it is even better if it is not magnetic. Mine is still not sent from FT
Received my clone from FT so impressed I place another order but not due to sent until 4th of next month.
Sent from my Nexus 4 using Tapatalk 2
I ordered one back on the 9th.. Went from shipping on the 19th, to the 24th, and now it says restocking and I am not alone in this, many others are posting issues on the FT website. So, plan to wait 30+ business days on this one.
-CF
-CF
Ordered 9/9, should have shipped yesterday, then went to 'restocking', now it says 'ready to ship'. Well, waiting, waiting, waiting, ...
sent from my phone
sent from my phone
Dumb question, but has anyone been able to make a hybrid out of a nemesis, clone or original? I really want a hybrid and am thinking of getting another 19/rsst/sg1 since mine was lost. I just don't know if I should go through the trouble of modding the switch again. It was such a beautiful mod in 18350 mode
Sent from my LG-P769 using Tapatalk 4
Sent from my LG-P769 using Tapatalk 4
Dumb question, but has anyone been able to make a hybrid out of a nemesis, clone or original? I really want a hybrid and am thinking of getting another 19/rsst/sg1 since mine was lost. I just don't know if I should go through the trouble of modding the switch again. It was such a beautiful mod in 18350 mode
Sent from my LG-P769 using Tapatalk 4
On the 28th Fusions Mods will be releasing a Nemesis hybrid kit for under 50 bucks.
did a voltage drop test today authentic neme against clone,
1 ohm coil
real neme .19 , voltage drop
Clone, .36 voltage drop,
I then played around with clone cleaning it more used some ox-gard on the threads got it to a .28 drop still was not happy so I changed out the cheap looking contacts that came with it with authentic contacts and bam .19 same as my authentic not to bad at all
forgot to mention this test was done with a mnke 18650 to get the .19 drop on a 1 Ω coil did the same test with a AW 18650 and got a .27 drop with both the clone and authentic neme , im sure the AW would preform better if I used a higher ohm atty but the mnke def hits the hardest at low ohms
1 ohm coil
real neme .19 , voltage drop
Clone, .36 voltage drop,
I then played around with clone cleaning it more used some ox-gard on the threads got it to a .28 drop still was not happy so I changed out the cheap looking contacts that came with it with authentic contacts and bam .19 same as my authentic not to bad at all
forgot to mention this test was done with a mnke 18650 to get the .19 drop on a 1 Ω coil did the same test with a AW 18650 and got a .27 drop with both the clone and authentic neme , im sure the AW would preform better if I used a higher ohm atty but the mnke def hits the hardest at low ohms
Last edited:
There is a new clone on vaporbreak made by haiyuan, it has haiyuan logo on the bottom and everything else looks as a exact copy, even venting hole is below nemesis logo, just like on original nemesis.
Which one is better, let's wait for someone to order
Which one is better, let's wait for someone to order
Not doubting your findings but just to add to the discussion (I like when people publish their numbers numbers)
.6 ohm single coil (Igo L) and .8 ohm single (RSST)
AW IMR 18650 (NOT the 2000mAh, the 1600mAh), MNKE 18650
Chemesis, Sigelei 19, Chi Chi
3.97-4.02 Volts measured at the posts on a 4.2V charged battery
.4 Ohm dual coil nimbus, same players as above
3.85-3.91 Volts measured at the posts on a 4.2V charged battery
I've stopped using noalox entirely as it doesn't seem to do anything for me except attract dirt and create gunk. I just clean once in a while and polish contacts when they start to look oxidized (mother's metal polish followed by soap/water/toothbrush, +/- a spin in the drill with 1500+ sand paper)
EDIT: To be honest I recall getting similar/identical numbers on my AW 18490s but those measurements are not in a recent memory so I don't want to swear by them at the moment. I personally can't find any hard data on MNKE vs. AW out there and my findings (not how it vapes, how it measures at the posts) don't indicate any difference between the two.
Now the AW18650 2000mAh, that's a POS unless you're putting it into a regulated device
Last edited:
I was using an 18650 aw 2000mah for the .27 drop also used a tankometer to do the voltage drop test
i still havent received my chi you clone that i ordered well before the chemesis even came out. i would have ordered a chemi by now but i like the look of the chi you better. my plan is that if i get one of the chi yous with bad 510 threads, im trading it for the chemi. heck, i might just order the chemi anyway. im noticing that recent orders are being sent before China catches up on their HK post backlog. only problem i see is that i just know ill end up ordering like $100 worth of stuff once i start putting a cart together
hey what up Mann! did you get a chemi?
Last edited:
Awesome, I went and bought a clone in person, $45.
Its pretty nice, I think I still wanna get a 19 and hybrid that. I don't know if it vents through the lock switch, but mine doest have a hole in the bottom cap. I'm using it in 18350 mode and I think the #19 was just plain heavier. I dropped the top cap on the floor already made a small dent. In addition to that I do have trouble getting the bottom switch into the mod, so I load my battery from the top. It doesn't hit the greatest and probably needs to be cleaned but Its too late to buy rubbing alcohol. All in all a really great purchase for a normal use. The 18350 is puny and I would be scared to use a 22mm glass tank on it. I would like a basic 18500 tube instead of stacking a few tubes together in crazy combinations. It had a big voltage drop from 1350 to 18650 tubes off fresh batteries, 1.8 ohm is was low in vapor until I reassembled the switch and lazily wiped the 2 tubes. I've tried 3 different battery brands and they all need minor adjustments from the center pin to removing the extra 5mm ring thats included. I'll probably buy a fat IBTank later with a future mod, like a real Nemesis!
tl;dr hits hard@1.4 ohm rebuild, feels great in 18650, wondering if the real deal is beefier.
I hope I didn't miss out on the hybrid sale because the kit has been out of stock for a while
Last edited:
hey guys did you see that fastech is also selling katos astro mod clone ....wow they are going crazy with the cloning now..lol
Last edited:
- Status
Similar threads
- Locked
