Who makes a Nemesis clone and who's is the best? I know hcigar makes one. Does EHPro make one? Anyone else?
- Status
Bucky currently has 30 Hcigar Nemesis clones in-stock for $52.99 shipped...
Hcigar Nemisis Clone [hcigarnemisisclone] - $52.99 : Buckys Bargain Vaping, Discount Vaping Supplies
Hcigar Nemisis Clone [hcigarnemisisclone] - $52.99 : Buckys Bargain Vaping, Discount Vaping Supplies
Or if you don't want to waste money fasttech has them $29.08 
these are hcigar no matter how many people say different. The finish is excellent the build is excellent the mod hits excellent only issue is the same as the original has if you don't press the button centre on sometimes it feels grindy.
Sent from my Nexus 4 using Tapatalk 2
these are hcigar no matter how many people say different. The finish is excellent the build is excellent the mod hits excellent only issue is the same as the original has if you don't press the button centre on sometimes it feels grindy.Sent from my Nexus 4 using Tapatalk 2
Or if you don't want to waste money fasttech has them $29.08
Sent from my Nexus 4 using Tapatalk 2
That link was for folks in the States who want one within in a few days, and not wait for FT...
I just got my fast tech Nemmy but I haven't took it apart to clean. I will do so after I take a nap I be back to post extremely detailed pictures next to my VR.
Hey D,
Did you get lost?
Hoe long does it take to clean a mod? LOL
I have one on order(not shipped until 9-27)
I'd like to see if I should keep this mod in my basket.
30 min in a ultrasonic cleaner should do the trick, I don't have a clone but do own two authentic and they both needed a good clean, the button being stiff is part of the authentic as well they do break in after use
Lol sorry I actually just slept for 12 hours. I will update this as soon as I get to my brother machine shop.
Pictures will be up sometime tonight. I am doing some fine cleaning right now (my vr have some tarnish and scratches, and the clone I need to do some fine cleaning before using).
So after a thorough clean and polishing I notice a few difference with the clone and real mod. First off the both pins are different and are not interchangeable without you forcing it in.
. Left mod is Vr, Right mod is Clone. Also the black spacer ring is longer by 1mm.
This is a picture of it polished and shine.
Left is shine/polish right is how it came in the box.
Logo comparison
. The clone logo's right side is not as clean as the original logo.
I also ran the logo through the polisher pretty hard and it seem to have stay so don't worry about it coming off even though it not as deep as the original.
Bottom button
Both B's does not connect. However can't really tell in this picture but I can take some more tomorrow, the lettering on my VR is double lined compare to the clone. Also the train isn't as detail just like the logo.
Out of the box: Come in fully assemble black box. (My firing button was scuffed but I buffed it out)
Weight wise feels pretty dead on.
Performance feels a little dull, maybe it is the contacts. I didn't want to try to swap contacts.
Tubes were pretty gritty while I was screwing them on, but after a 4000 grade sand down it was as smooth as butter.
Firing button was also very gritty but after a 4000 grade sand down it was better but still felt gritty. So I swapped out the spring to my short light nemesis spring, it was pretty smooth. I can also fire it off on the side and it will go down just as smooth as my VR.
After a full polish and sand down it will feel as good as a legit nemmy. I would buy another one if it came in a different style.
I will get some more picture tomorrow I was pretty tired when I took these so it wasn't as good as it could be.
. Left mod is Vr, Right mod is Clone. Also the black spacer ring is longer by 1mm. This is a picture of it polished and shine.
Left is shine/polish right is how it came in the box.Logo comparison
. The clone logo's right side is not as clean as the original logo.I also ran the logo through the polisher pretty hard and it seem to have stay so don't worry about it coming off even though it not as deep as the original.
Bottom button
Both B's does not connect. However can't really tell in this picture but I can take some more tomorrow, the lettering on my VR is double lined compare to the clone. Also the train isn't as detail just like the logo.Out of the box: Come in fully assemble black box. (My firing button was scuffed but I buffed it out)
Weight wise feels pretty dead on.
Performance feels a little dull, maybe it is the contacts. I didn't want to try to swap contacts.
Tubes were pretty gritty while I was screwing them on, but after a 4000 grade sand down it was as smooth as butter.
Firing button was also very gritty but after a 4000 grade sand down it was better but still felt gritty. So I swapped out the spring to my short light nemesis spring, it was pretty smooth. I can also fire it off on the side and it will go down just as smooth as my VR.
After a full polish and sand down it will feel as good as a legit nemmy. I would buy another one if it came in a different style.
I will get some more picture tomorrow I was pretty tired when I took these so it wasn't as good as it could be.
Attachments
I just ordered a one of these clones. Its my first mech mod cant wait to get it. Now have to find out what rba i should slap on top of it
Where did you get your clone from? I just ordered mine through FT and I'm also ordering solid silver pins from Vapor Mad hoping they will be interchangeable..
Ft, when I was switching mine, it was putting up a fight so I just use the fast tech pin. It still hit hard but not as hard as the original.
yeah it comes with silver plated contacts, but the solid silver ones would be better as theres no coating to wear off.
Falconi, please report back if the solid silver ones from Vapor Mad will fit the FT Nem clone.
Falconi, please report back if the solid silver ones from Vapor Mad will fit the FT Nem clone.
The Vapor Mad pins will fit the clone, but they cost like $34. That is more than the mod itself and you will, likely, not even notice the difference. It's your money, and I am not trying to tell you how to spend it, but it just seems silly upgrading the pins when the result will be so miniscule.
I got a chi you (hcigar) from aka vapers with silver plated contacts nearly a month ago and its took a hammering in that time and the contacts are still like the day I got it, sheesh you guys worry about nothing too much also had my nem from fasttech a week and the plating seems fine
also had my nem from fasttech a week and the plating seems fine
Last edited:
- Status
Similar threads
- Locked
