- Status
Mister D
What are those toppers you have on there?
What are those toppers you have on there?
it became my favorite dripper after I enlarged all the holes on it! I think its sort of a clone of the cyclone. its dual coil with bottom airholes
Look for a source for magnets. Where did you find 19mm x 14mm x 1mm magnets at Guy's Magnets | Neodymium | Samarium Cobalt | Ferrite | Alnico | Craft | Magnetic Products | Testing Equipment
The 19mm magnets will have to be sanded down according to many posts that I've read. These magnets are a drop in replacement according to dkwasa from the FT forum.
10050098W Strong NdFeB Magnet Ring - Silver (10 PCS) - Free Shipping - DealExtreme
10050098W Strong NdFeB Magnet Ring - Silver (10 PCS) - Free Shipping - DealExtreme
Actually the magnets we're asking about are 14x9.5x1.
I just got a message from dkwasa. He's the one that found the magnets. He says that the magnets work great straight from the package. Time to order some.
They work! Have used them with no issues since they were installed 3 days ago. Bottom magnet slides onto the post with no effort and the top magnet keeps the brass locking pin in position.
I have no idea about their N-rate but the throw becomes lighter compared to stock springs. Adding a third magnet makes the throw a little to heavy for my likings.
All the best
Hey there you are bro! I was just telling everyone about your discovery. Thanks for jumping in and confirming your results.
People receiving new Hcigar nemesis clones are reporting the engraving is a lot nicer now and the battery vent holes now line up with the angel. Can anyone else confirm? Looks like China is refining their clone to make it more like the real device.
It should fit. The hcigar version is interchangeable with the real Nemesis. There are a few videos on youtube.
Sent from my iPhone
Actually the magnets we're asking about are 14x9.5x1.
I just got a message from dkwasa. He's the one that found the magnets. He says that the magnets work great straight from the package. Time to order some.
got some ordered as well thanks
I did read, but I didn't click the link lol I saw the link but I thought it was for the magnets that had to be sanded down, not the ready-to-use ones... smh at myself
I had the 14x9.5x1 magnets from dx under the microscrope today. They have tiny burs along the inside circumference. After a gentle touch with EcoWet 1200 grid dry wet sandpaper, the switch has become very smooth. All though the magnets does work with no modification, i would recommend to polish the inside of the top magnet for an improved switch operation.
All the best.
All the best.
Last edited:
Another difference to note is the contacts on the clone are much brighter/shinier than the authentic because the clone's are plated with nickel and the authentic plated with silver. Not sure about the conductivity of nickel not sure if the contacts are made of it or just plated.
- Status
Similar threads
- Locked
