new AFS thought

[imeothanasis]

To avoid flooding effects, I deside to put a small (about 5mm in heigth) rounded catridge wool inside the AFS atomizer.

My results were a much better throat hit and no flooding effects at all even if I hade the hole of the atty always facing down. I smoke like this about 1/2 hour without the need of turning the hole up because there is no flooding effect. I suggest this to all my AFS people and I would like to tell me your results guys

 

[ggero]

Thanasi I think you should post a video on this .. I dont understand what exactly you want to advice us

 

[ggero]

You want to round the atty with a 5mm height piece of wool inside the full of e-liquid AFS?..This will transform the AFS as a round classical 901 filter ..It sounds logical

 

[imeothanasis]

You want to round the atty with a 5mm height piece of wool inside the full of e-liquid AFS?..This will transform the AFS as a round classical 901 filter ..It sounds logical

No no ggero, I mean to put this small wool inside the atty, touching the bridge

 

[ggero]

Thanasi as I read to other forums is not healthy to touch the bridge anything but juice..I dont know if we are meaning the same thing

 

[womblebat]

Thanasi as I read to other forums is not healthy to touch the bridge anything but juice..I dont know if we are meaning the same thing

As long as the material is kept damp it won't be a problem, and with the AFS continually keeping it wet it sounds safe enough

 

[ggero]

I agree with that but if you drag for 5 secs continuously then the bridge will become real hot and red..This is not a problem ?

 

[imeothanasis]

I agree with womb GGero and bridge will not get red hot because the wool is always wet inside the atty.

 

[ggero]

At this point you are both right

 

[womblebat]

I agree with that but if you drag for 5 secs continuously then the bridge will become real hot and red..This is not a problem ?

Not a problem because if the material is wet, and it will be with AFS, the bridge wicks the liquid down to the coil, so it will never reach bright red, if you ever see a bright red coil it means it is running dry

 

[Lisaf01]

In any case, in any e-cig with a cartridge on, the cartridge filler touches the atty bridge so I don't see any difference here in this scenario - if anything it would be wetter than in a normal scenario. I'm gonna try it.

 

[womblebat]

In any case, in any e-cig with a cartridge on, the cartridge filler touches the atty bridge so I don't see any difference here in this scenario - if anything it would be wetter than in a normal scenario. I'm gonna try it.

Exactly! this is how the atomizer bridge wicks the liquid to the coil, its always touching the material

 

[Lisaf01]

Exactly! this is how the atomizer bridge wicks the liquid to the coil, its always touching the material

Yep - in my case though, I am going to try it with a bit of rolled-up PTB cos I don't use standard cartridge filler............

 

[vapn]

going to try it now... thanks for the tip imeo... I have one atty that tends to flood more than others.... ;-);-)

 

[imeothanasis]

going to try it now... thanks for the tip imeo... I have one atty that tends to flood more than others.... ;-);-)

xaxa ok vapn If fluids more, then put more wool

 

[vapn]

Hey that cut down on the gurgling sounds too.... and I am getting way more vapor also. I think what we have done here is reduce the air pressure inside the atty tube and restricting the juice flow also. I am going to try making some kind of rig with a hole down the center. Like the Cartomizer so that the filler material is pressing against the atty wall. Then when the juice enters the atty it will soak that but still allow the air flow

 

[lashmn]

Vapn,

I was having the same results and thought I finally had mastered the AFS. Yea, a red letter day but, alas, it was not to be. My atty died. Right now I am giving it a PGA bath and will see if it omes back to life in a day or two.

Lynn

 

[emonty]

vaping like a mad cow again with the wool inside......let's see how it goes throughout the day....good tip Imeo.....thanks!!!

 

[Obie]

Ok guy's I've asked this before... Why not try using a cartomizer???
Put a 901 tip on it and a laser hole and away you go!!!

 

[emonty]

still working GREAT with the wool inside!!!