- Status
TB, got my tubing this evening. Thanks a million. Now on with the experimentation.
3mm pyrex wrapped with flat kanthal then semi-enclosed with 5mm pyrex. 15mm #500 mesh tube with an expanded center hole and then a 40mm solid #500 mesh wick inserted into the center hole. I get good consistent vapor production with the cap off. The hollow wick provides a much better quality vape than a solid wick with the cap on.
It does not solve the overall airflow issue, but the outside tube provides a bit of insulation to airflow cooling the coils. Slight improvement, not revolutionary, but very vapable. Much less efficient than standard genny and gets hot! Still experimental... needs work.
Just thought I would share the concept. BJ hope you don't mind if we continue on your thread.
Without wick:
With wick:
Continue on, hope someone finds a working solution, I am still playing with it, but my 28g oval coil in the vivi novas with this new hemp 1mm thread I found is so good I have a hard time putting it down for something else.
Do you have a link to where you bought the hemp thread? I am using ceramic 4mm and really liking it. Wondering if this is any cheaper or better.
$1.79 free shipping 5 yards 20lb 1mm natural. This was the best wick I got fairly good results with the quartz.
Hemp Twine Cord 1mm 20 Test 5 10 or 25 Yards Color Selectable | eBay
And the best setup I have ever vaped is here:
http://www.e-cigarette-forum.com/fo...37-vivi-nova-28g-oval-coil-1mm-hemp-wick.html
Last edited:
BJ are you boiling this hemp? I may have to give it a try because the bamboo is adding a flavor even after boiling and I don't care for it.
- Status
Similar threads
