New Genesis type atomizer by DID!

[Cloud Wizard]

Figured it out. Its the lower + nut. Pushed the insulator down and the nut is shorting on the roof of the tank : (. Am I SOL?

you should be able to fix that. Those insulators are just pressed in so maybe you could pop the top one out using a paperclip or something and add one of the little o-rings to raise it up. I didn't want to booger it up, so pushed from the underside of the tank top and it came out pretty easily.

 

[Monoxxide]

Sync'd problem is probably because youtube still processing the huge file. Had same problem on my old PC 30 minutes ago, now watching on new laptop and its lining up without freezing any.
Thank you for making this RW, looking forward to the folow up and tips n tricks to get most out off the DID with some different setups.

 

[rwechsler]

Damn, I hope all of the a/v problems sort themselves out. I have 2 more parts that I'll be uploading tonight and tomorrow.

 

[Jim Damianidis]

FINALLY! After 12 hours of uploading (not an exaggeration!), part 1/3 is uploaded! Enjoy!

Thank you Rick!
I am waiting the next one!

 

[MiriamWTH]

Has anyone gone a whole week just filling and vaping without any fiddling/adjusting ?

Me.

If i use very clear juices i basically only dry burn my wick and coil once a week and then rinse it under the tap, dry burn again and then fill again.

And that is precisely why i love the DID. Once it is setup it is just fill and vape, with the occassional dry burn to clean.

 

[David Pavid]

Any idea about when the next batch of mini-DiDs will be send out?

 

[Jim Damianidis]

Hi

tomorrow I will start sending the Mini DIDs
We will keep order priority so please
give us one week for the status to change to "Shipped" (I speak about the orders made last week)
and another 2 weeks after for your order to be delivered
I ask you this because of to many orders I got last week
and the mails are to many as well so keep in mind this paragraph please

 

[David Pavid]

Sounds great Jim! I have no trouble waiting, as long as i have a rough estimate ^^
looking forward to it!

 

[classwife]

Breakfast for everyone...including Uma !

 

[Cloud Wizard]

Breakfast for everyone...including Uma !

G'Morning CW! Holy Moly, that pic just made me really hungry.

 

[Galaxy3]

for all who are interested.

Jim replied my email and will be putting the stainless steel center post and nuts available on his site on Monday.

Cheers.

 

[Cloud Wizard]

for all who are interested.

Jim replied my email and will be putting the stainless steel center post and nuts available on his site on Monday.

Cheers.

hmmm, e-vape.gr <refresh> <refresh> <refresh> <refresh>....

 

[Striker911]

I think Strikers analogy does work when considering the current capacity (or ampacity) as proportional to the cross sectional surface area of a conductor.

I do wonder though (based on Dusty's question) whether or not the number of twists/distance have any appreciable effect on the surfaces's electromagnetic field. E.g. Is there an optimum twist ratio for creating more attraction to juice getting pulled into the coil (which would force more juice into the wick by capillary replacement).

Sent from my iPad using Tapatalk HD

I learned the whole "Water hose" thing in my HVAC trade school classes. I should have also received a certificate for electric engineering with all we learned on the subject. Oh well. They where fun classes. Funny thing about that. When my AC unit needed work it was cheaper to put in window units and also cheaper on the electric bill Zoned cooling. I used the 240V wire from the condenser and ran it back in the house to put in an electric stove. Cheaper then LP gas lol. Sold the LP stove and used the money to get a electric one.

you should be able to fix that. Those insulators are just pressed in so maybe you could pop the top one out using a paperclip or something and add one of the little o-rings to raise it up. I didn't want to booger it up, so pushed from the underside of the tank top and it came out pretty easily.

Thanks for the tip. Think I got it by just pushing it up and adding less snot to the nut. Will see how it works out once I make a new wick. Got cocky and just burnt some juice in. Not working out that way.

 

[overall]

Has anyone gone a whole week just filling and vaping without any fiddling/adjusting ?

I have gone several weeks with just filling and vaping. I do periodically switch it all out but typically this is for fun rather than necessity. I am using a 4th nut though which helps keep the top 2 nuts secure and eliminates the loosening. Although that doesn't seem to be an issue if you put the its with the little well in the center facing each other with the wire in between. I have also dropped mine plenty of times and not messed up the coil. When I first started with the did I experienced the same problems as we all have with unstable coils. This seems to be a thing of the past.

 

[Jimi D.]

What a nightmare I had this weekend, using Kanthal Type D. It seems that it picks up every minute short, and does not hold up to much heat. I have some nichrome to hold me over until my Kanthal AWG arrives.

 

[Jim Damianidis]

I will have Kanthal wire 0.2mm 46ohm/meter
The price will be 5€uro for 30 meters
I will have a lot so do not worry any more about wire!

 

[Mr.Mann]

I will have Kanthal wire 0.2mm 46ohm/meter
The price will be 5€uro for 30 meters
I will have a lot so do not worry any more about wire!

Thanks Jim! I won't worry anymore...what about mesh?

 

[classwife]

Ok...I know it is Sunday...and my Mini DID just shipped the other day...but dang...I still have a strong urge to go check the mail box !





I saw Pete's DID last night...it is beautiful !!!

 

[Mr.Mann]

Ok...I know it is Sunday...and my Mini DID just shipped the other day...but dang...I still have a strong urge to go check the mail box !





I saw Pete's DID last night...it is beautiful !!!

Hey Classy, I just got back from checking my mail for no reason! It's like looking in the refrigerator when you know nothing is in it.

 

[Jimi D.]

The Nichrome coil popped on me also. Ugh ! Frustrated!!