New Genesis type atomizer by DID!

[kurtus]

tank" data-source="post: 6473403" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">

I know man. Someone offered me a DID and a ZAttyPro for my zenesis mini. Might have to take it after reading these reviews

I can't believe someone offered up a zattypro let alone a DiD, I say go for it bro, sounds pretty fair to me!!!!

 

[Jason-Tank]

I just ordered a second one too. I love the stainless steel tank, and I can put any kind of juice in there without worrying about cracking the tank. I also have a katana and have to think 3 times about putting certain juices in there.
I would like to see a larger DID in the future which would be the same diameter as my provari. It would hold more juice also.
It is amazing how the juice improves with the 2nd + fills.

Oh and very high pg juice will leak when laid on its side for several hours. Not the full tank like some of my other genesis atties.

I do love my DID though.
Even considering not buying the Zen zatty pro.

I use 70/30 pgvg. Are you saying it wont leak?. Very curiouse if it is actually non leaky. Cus thats somthing that turns me off , not being able to put a genesis in my pocket and not worry

Can more ppl chime in?

 

[Zurd]

Can more ppl chime in?

I just ordered a DID 2 hours ago, I can't say anything about it, however I've used a Genesis Maxi for like almost 3 months now, it does leak if it's on the side for more than 15 minutes or so. The liquid goes through the wick. But it's not a big leak, I wouldn't call this a problem, just a few drops if you're not careful.

 

[Jim Damianidis]

I do not have any leak with VG never!

 

[denali_41]

i lay mine down all the time overnight with airvent hole facing up and it never leaks with 100% PG juice !!

 

[denali_41]

very good job!


the trick that Scott mentioned was perfect I tried it 3 times allready and is 3 to 3 perfect
with this trick with the paper and the DID I think that many people who was thinking about take a genesis they don't have nothing to be scared of!

what is this paper trick you are talking about ??

 

[outadadark]

what is this paper trick you are talking about ??

Scott Bonner just posted this... Hotspot issue tip...

...............

 

[NandyDC]

The DID is the first pocket friendly genesis style I have used so far and no leaks, using 70/30~50/50 PG/VG. Using it on Precise Plus and GGTS.

 

[Uma]

As everyone gets use to vaping genisis - you will have a pretty good idea when it needs filled again. THEN you wont need a clear tank and can enjoy the beauty of the SS tank Jim has made. You will never see a clear tank on any of mine - but thats my personal preference.

I'm sure that I, too, will get used to the feel of it in time. I just wondered if there's a way to listen for the level. Maybe metal against the metal, such as an SS fork against the SS tank ... tap tap tap?

 

[Uma]

The DID is the first pocket friendly genesis style I have used so far and no leaks, using 70/30~50/50 PG/VG. Using it on Precise Plus and GGTS.

Mine's going on my SB which is always in my back jean pocket while doing outdoor chores. Between the toughness of the SS tank and the twist on cap, I'm going to be rocking that SB/DID combo all day! I'm very excited about this product and company both.

:::: making mental note to not fill with apple flavor while around the horses ::::

 

[Jason-Tank]

I just ordered a DID 2 hours ago, I can't say anything about it, however I've used a Genesis Maxi for like almost 3 months now, it does leak if it's on the side for more than 15 minutes or so. The liquid goes through the wick. But it's not a big leak, I wouldn't call this a problem, just a few drops if you're not careful.

i had my zen mini in my pocket and half the tank dumped out lol. for me its a big problem , could just be the zenesis type but, when i had a line v2 it would leak little drops which still sucks , cus who wants to carry around paper towel

 

[denali_41]

can't wait to try tha paper trick,,,the coil has been owning me so far

 

[Jason-Tank]

can't wait to try tha paper trick,,,the coil has been owning me so far

Make sure you fold your edges in . The main issue with shorts is usually where the Mesh goes into the tank, it doesnt look like theres insulation there so make sure u fold the outside edge so theres no frayed mesh sticking out. Oxidize it well.

 

[vdrum4250]

i tried new technique and quench a few times in pg after the water quenches.. then burned off the pg...no paper needed now...

 

[motomatt]

very good job!
2 and a half coils
Try the bottom start of the wire between the mesh and the nut
the wire starts from the screw but still taching the metal until reach the mesh and starts the rounds on the mesh
so now you have 3 whole coils!
But you have to try the 5 coils
the trick that Scott mentioned was perfect I tried it 3 times allready and is 3 to 3 perfect
with this trick with the paper and the DID I think that many people who was thinking about take a genesis they don't have nothing to be scared of!

Thanks for the instructions Jim

 

[Striker911]

I just did a 5 wrap coil the way Jim said to do it a few pages ago. Its so mild I cant get coils to glow. Paper is also not burning off. Moved it up from 3.7 to 4.3V and its the same. Pretty confident in the coil I wrapped, so is it normal or should I start fiddling? My coil is 2.9ohms.

FOR JIM. Any way to make the wire you send wrap around something round like a wooden peg so its not kinked up? Just wonder if that makes it harder on people learning to wrap coils....

 

[motomatt]

Yes dspin
Metal Madness Vapors is my LOGO
Thanx to KIR FANIS (which means Mr Fanis) I have a partner to make the clear windows for my babies
I like SS
and as you mentioned the experience coming very soon and you feel it when it needs liquid.

I will be adding the clear windows to my next order

 

[spw11]

:::: making mental note to not fill with apple flavor while around the horses ::::

Yes... U don't want the horses nipping at your behind! Might be a fun trick to play on someone though........

 

[motomatt]

Take one of the mesh pieces Jim sends, cut in half and there you have it. He sends enough for 8 wicks

Thank you, I hope I get Wick right right

 

[vdrum4250]

Jim, you need to get the word out some how..i have been sending people to this link.. many people dont know about this device yet... its a shame they should.