New Genesis type atomizer by DID!

[grabeard]

Great collection. Looks like you have about the same number of toys.

Thanks Jim, really enjoying both of my DiD units, nice having each size too for different mods, Mini fits well on smaller mods, Both work Excellent Jim.

 

[grabeard]

I vape with 100% VG and I use 400 and 325. I know 325 works great, never tried 270.

So a question for you veteran users of R.A.'s ....... What # mesh do you all prefer and use for 60PG juice...sometimes 50/50 ?
Right now Im using 270 & 325 SS. Im getting very consistent flow, flavor, And wicking without tilting, tipping or any type of aid. Am I on the right track ?

 

[grabeard]

I don't even use the nuts, I simply wrap around the pole.

i think i solved my e1 errors. it was casuse the nuts are too big and touch the coils. i need to babysit my coils and make sure they dont touch. i am going to see if i can buy smaller nuts.mike n

 

[grabeard]

Hi Jim, I would like the smaller hole

Well I have to put the enquiries in an order
I try to make as many thinks together as I can
I will make 1,5mm airhole soon!
I have some pieces with 1mm hole though

 

[Trench]

So I'm walking out the door this morning and realized I got DID yesterday and didn't even notice the package.

Here she is on the only tube I have at work. Since I likes 'em top-heavy, she's a real beauty in my eyes.

 

[fuzzione]

I'm trying to wrap my mind around the whole hole thing
Would a smaller hole not only tighten the draw for those that prefer a less airy one, but also increase the velocity of the airflow within the chamber? Try partially covering the hole with your finger as you draw and see if you experience any differences. Or, cover it with scotch tape and pierce a smaller hole with a needle to experiment a little. I think I prefer a smaller hole actually. Jim, save a 1mm top for me

 

[plerskine]

grabeard- you need to put your order numbers in the same list where the other numbers are as Jim described- comma then order number then comma etc. that way all numbers are together in one list for Jim.

 

[denali_41]

REALLY SORRY ABOUT THIS WHAT HAPPENED HERE WITH THE LOTTERY
I have moved to new thread the lottery
So please stop posting the lottery here in this thread and go
here for this reason:

http://www.e-cigarette-forum.com/fo...ottery-one-mini-did-mmvapors.html#post6626732

Krap !!! another DID thread to try and keep up to date on

 

[fuzzione]

grabeard you might want to include your numbers on the main list in the lottery thread or they could get lost. Couldn't help but notice that; I would have fixed it for you but did not want to appear presumptuous

 

[jayvolt]

Coil 2 4/5 wrap 2.0 ohm and purring. One small observation, if we could get a thred size/pitch on the center pin, most people could alleviate the hotspot/shorting issue. I noticed you have to be VERY careful about the wick relation to nuts, the coils sometimes touch and short.

 

[fuzzione]

Ha plerskine we must have hit the submit button at the same time.

 

[grabeard]

I will do that now, thanks

grabeard- you need to put your order numbers in the same list where the other numbers are as Jim described- comma then order number then comma etc. that way all numbers are together in one list for Jim.

 

[Jim Damianidis]

Hi Jim, I would like the smaller hole

OK go to http://e-vape.gr/The "DID"/top-cap-DID

 

[grabeard]

Done as requested, I was thinking WOW at all the units some people have. Brain fart.

grabeard- you need to put your order numbers in the same list where the other numbers are as Jim described- comma then order number then comma etc. that way all numbers are together in one list for Jim.

 

[plerskine]

Ha plerskine we must have hit the submit button at the same time.

HaHa

 

[BigBopper]

OK go to Top cap for the DID and Short-DID (1mm airhole)

Jim,
What is the standard size hole?

 

[grabeard]

I think I remember it's 1.2mm.

Jim,
What is the standard size hole?

 

[rwechsler]

Damn that's brilliant, and yes it is! There are special hot powdercoats that people apply to knives which use extremely durable ceramic that would definitely adhere to the knurling on the nuts.

I had an idea. As I am not a modder, I don't even know if this is possible, so if you modding folks could critique this, I'd be happy.
OK, here goes....
Is it possible to coat the knurled outside of the nuts on a DiD with ceramic, but leave the portion where the nuts touch each other uncoated?
If this was possible, I believe this would eliminate 98% of the shorts people are getting because the coils are touching the nuts. Or, if not ceramic, some other high temp resistant non-conductive material. I know it's not something a DIYer could do at home, but is it something that's possible for a person like Jim?

 

[Cloud Wizard]

Damn that's brilliant, and yes it is! There are special hot powdercoats that people apply to knives which use extremely durable ceramic that would definitely adhere to the knurling on the nuts.

What about something as simple as a donut cut out of one of the silicon baking sheets? It would only need to be slid over the top nut after the coil is connected to hold it off. They're supposed to be good for over 500deg f and are food grade.

 

[mwa102464]

Propable the grommet is the insert?
This is more dificult but I will see some experts of injection systems
SS center and nuts next week

Yes the grommet is the insert, maybe jut a press fit Delrin piece ?
that's great next week is super,

Thanks jim