New Genesis type atomizer by DID!

Status
Not open for further replies.

Bimbo

Senior Member
ECF Veteran
Verified Member
Aug 27, 2010
269
64
Riyadh Saudi Arabia
I'm on my third success with coiling. Now i made a 2/3 wrap with the same ss mesh i oxidized 3 weeks ago. I made a 1.5ohm wrap and working perfectly.

All i can say is it's full pleasure. All my previous atties are now left in a confinement of a box which will be kept as a souvenir of the past.

Never enjoyed flavor like this in my 2 years of vaping :)
 

ChuckBell

Moved On
ECF Veteran
May 22, 2011
73
62
Chicago, IL
finally got my clear tank and extra set of nuts - four nuts seem to work nicely , I'm using the bottom two nuts for my coil on the post and get better vapor:toast:
IMAG0005.jpg
 

wasabi5858

Super Member
ECF Veteran
Verified Member
Jul 8, 2012
399
539
Los Angeles
Last edited:

Horseman9

Ultra Member
ECF Veteran
Verified Member
Mar 10, 2012
1,035
2,440
Colorado, USA
Tiff.. did you anneal your wire with a bic lighter, straightening and smoothing the kinks out, before coiling?
I dont do that anymore, I make my wick, then coil out of the device, remove the coil & requench (in case I nicked something), slide the coil back on. Then I prime the wick (with coil attached).
Coil3.jpg



Note:your mileage may vary
 

Cloud Wizard

Ultra Member
ECF Veteran
Verified Member
Feb 24, 2012
2,315
5,684
Somewhere in PA on my Ultra Limited
@Mr. Mann: A lot of folks ask, is it possible to add a spec page to your index that shows the ranges for various setups

e.g.
  • Kanthal 34A1 (twisted), 3/4 coil, fat wick (1/2 sheet, just fits wick hole): 2.2ohm
  • Kanthal 34A1 (twisted), 3/4 coil, Med wick (1/2 sheet, little smaller than wick hole): 1.7ohm
  • Kanthal 34A1 (single), 4/5 coil, fat wick (1/2 sheet, just fits wick hole): 2.9ohm
  • Kanthal 32A1 (single), 3/4 coil, fat wick (1/2 sheet, just fits wick hole): 1.6ohm
  • Kanthal 32A1 (single), 4/5 coil, fat wick (1/2 sheet, just fits wick hole): 2.1ohm


I know everyone will get different results, but we could build a knowledge base that helps for a starting point.
 

Horseman9

Ultra Member
ECF Veteran
Verified Member
Mar 10, 2012
1,035
2,440
Colorado, USA
@Mr. Mann: A lot of folks ask, is it possible to add a spec page to your index that shows the ranges for various setups

e.g.
  • Kanthal 34A1 (twisted), 3/4 coil, fat wick (1/2 sheet, just fits wick hole): 2.2ohm
  • Kanthal 34A1 (twisted), 3/4 coil, Med wick (1/2 sheet, little smaller than wick hole): 1.7ohm
  • Kanthal 34A1 (single), 4/5 coil, fat wick (1/2 sheet, just fits wick hole): 2.9ohm
  • Kanthal 32A1 (single), 3/4 coil, fat wick (1/2 sheet, just fits wick hole): 1.6ohm
  • Kanthal 32A1 (single), 4/5 coil, fat wick (1/2 sheet, just fits wick hole): 2.1ohm


I know everyone will get different results, but we could build a knowledge base that helps for a starting point.
30ga Kanthal a1 5/6 skinny wick 1.4-1.5 ohm
30ga Kanthal a1 5/6 fat wick 1.7-1.9 ohm
 

Jim Damianidis

Unregistered Supplier
ECF Veteran
Apr 29, 2012
1,110
5,576
Greece,Athens
www.mmvapors.com
Hi
to everyone!
tomorrow I will go to try rest a little.
I want to say that I have left my assistances
The one is Alexia which is on holidays for a week.
and Ilias is the one that will be here and keep the work on.
Very kind and good paople both.(That is why I chosen them)
So anything you need Ilias will help for everything!
please contuct at info@e-vape.gr
If there is something they can not help with ...
I will do it.Do not worry!
The sea will help me to relax and brink with me new ideas
I have many of them allready though.lol
I will be in holidays but believe me my thoughts will be here!
I must be a good boy with my family so I will be on internet only once a day!
otherwise I wll listen her all day long!
I love her but I love my peace too!lol

You know...
I can say that I am workholic this period and YOU help me everyday with your posts and fotos and your good words about my products to be full of energy!
to be ownest I do not want to go but on the other hand I have to sweem as much as I can. Makes good to my back pains!
I think this post is big allready!
See you tomorrow Night!!

STOCK UPDATE!
I should mention everything is on track on my Stock
PreOrders for regular DID will be shipped on 20 August
PreOrders for Mini DID will be shipped on 10-14 August
All SS spare updates will be available by the end of this week
Please allow up to 3 weeks for delivery after your order is shipped
also please allow up to week for order processing ans shipping notice
 
Last edited:
For all who are nervous - my tracking showed it was sitting in NY customs the day it was delivered. You must sign for package so its not going to your neighbors house. Tracking for US customers - It does not show until it hits the US. For everone else. - from the time it is mailed - if you have not received it in 30 days - then I would contact Jim. Not before.
Mine was delivered about an hour ago and still says processed through New York. I live in Hawaii so things usually take a little longer to get to me. I'll be firing this bad boy up here in just a bit! CAN'T WAIT!!!!
 
Status
Not open for further replies.

Users who are viewing this thread