New Genesis type atomizer by DID!

[classwife]

Anticipa -a-a-a-a-tion !

 

[grabeard]

Nope, still vaping 24 mg and loving it.

With my new DID on the way and this being my first Genesis I'm wondering about the throat hit. I am vaping 24 mg juice right now and enjoying it but will this be too much in the DID? Have most of you lowered your nic level when using a Genesis style atty?

Thanks, Scott

 

[muddstar]

Took this down a notch. Wrapped wire low, 3 wraps no higher than the negative post, then tighten down between the first and second nut from the bottom. Vapor is very "Chololike".

 

[frequentj]

With my new DID on the way and this being my first Genesis I'm wondering about the throat hit. I am vaping 24 mg juice right now and enjoying it but will this be too much in the DID? Have most of you lowered your nic level when using a Genesis style atty?

Thanks, Scott

I was vaping 8mg/mL, and even at that low, I went down to 6 because I think the DID burns so much more juice, I actually get more nicotine per puff. Seriously considering taking it down to 4. Too scared to go zero!

 

[harmudge]

Here's a video on how to do a coil for zenesis which is also a genesis style atomizer. This could be a help for people who are new to this :

BTW, I don't do the dry burn part, I always dripped a few drops and did wet burn and looked for hotspots.

Superb video.

New vaper to the fold and soon to be...new DID user too...ordered mines yesterday....can't wait for it arriving along with my shiny new Provari, that should hopefully be here tomorrow.

 

[Jimi D.]

I did, I did!!! I did get the DID!!!!

Thanks everyone! Especially to Cyrus Vap for turning me on to this device!

And Big Jim for creating this masterpiece!

Time to play, and join the party!

 

[Scottibones]

I did, I did!!! I did get the DID!!!!

Thanks everyone! Especially to Cyrus Vap for turning me on to this device!

And Big Jim for creating this masterpiece!

Time to play, and join the party!

Jealous... congrats I'm in Florida also just wondering how long from shipping notice did it take?

 

[exdrum]

Another video I stumbled upon that may be helpful, seems like there's no need to oxidize the entire wick and winding the coil on the non oxidized part may prevent some shorts...

 

[Mr.Mann]

I did, I did!!! I did get the DID!!!!


Thanks everyone! Especially to Cyrus Vap for turning me on to this device!


And Big Jim for creating this masterpiece!


Time to play, and join the party!

Not me. Mine is somewhere between Greece and Detroit. I am not even looking into the tracking; it will probably get here the same day my new mod and a ton of juice arrives. I, however, am absolutely thrilled for everyone that has recently gotten theirs! I actually like waiting. Plus, considering I just found out my wife is pregnant (our first), nothing can trump that wait.

 

[Scottibones]

Not me. Mine is somewhere between Greece and Detroit. I am not even looking into the tracking; it will probably get here the same day my new mod and a ton of juice arrives. I, however, am absolutely thrilled for everyone that has recently gotten theirs! I actually like waiting. Plus, considering I just found out my wife is pregnant (our first), nothing can trump that wait.

You da man Mr.Mann Congrats!

 

[Mr.Mann]

You da man Mr.Mann Congrats!

haha. Yup, I DID it alright! LOL Thanks, BTW.

I am going to be ordering a Precise Plus 18650 as soon as it's back in stock. They are supposed to be available real soon (like within a week). I am thinking of using the P+ and The DID almost as a "single" unit. I want The DID to be parked on a mod!!! (Then I can use my ProVari for general purposes)

 

[Dusty_D]

Congratulations on the pregnancy Mr. and Mrs. Mann.

I just got done setting up my second coil and mesh. This was a practice run, just to make sure that the first one was not a fluke. It came in at 2.1 ohms, and is holding there.

 

[kabonk]

Finally no hot spots on my non-did KickServe's video seemed to help thx, I'll be ready for my Did's

 

[muddstar]

You're stylin, gonna be a pro before you know it.

Congratulations on the pregnancy Mr. and Mrs. Mann.

I just got done setting up my second coil and mesh. This was a practice run, just to make sure that the first one was not a fluke. It came in at 2.1 ohms, and is holding there.

 

[Uma]

Not me. Mine is somewhere between Greece and Detroit. I am not even looking into the tracking; it will probably get here the same day my new mod and a ton of juice arrives. I, however, am absolutely thrilled for everyone that has recently gotten theirs! I actually like waiting. Plus, considering I just found out my wife is pregnant (our first), nothing can trump that wait.

Wooooohooooo!! Congrats Mr.Mann!!!!


Also a big congrats to all the new accomplished DiD owners! Way to go!!

 

[martinc]

So D,how`s the blend in that thing?

 

[ricklynchcore]

Congratulations MrMann, well done.

Sent from my cm_tenderloin using Tapatalk 2

 

[ricklynchcore]

Congratulations on the pregnancy Mr. and Mrs. Mann.

I just got done setting up my second coil and mesh. This was a practice run, just to make sure that the first one was not a fluke. It came in at 2.1 ohms, and is holding there.

Hey Dusty, out of curiosity what size kanthal are you using? Are you running on a box mod?

Sent from my cm_tenderloin using Tapatalk 2

 

[Dusty_D]

So D,how`s the blend in that thing?

I'm getting some aspects of it, and it's nice and clean but it's not all there yet. I'm guessing this is the "breaking in" that everyone talks about. I'm going to run this second coil for as long as I can, and report back on how it does with Geoffs Blend over time.

 

[Dusty_D]

Hey Dusty, out of curiosity what size kanthal are you using? Are you running on a box mod?

Sent from my cm_tenderloin using Tapatalk 2

I'm running 32 gauge and yes, that is on a box mod (Shan mod to be exact). I did all the measuring and testing on the Provari, and then switched over when it was ready to vape.