timmydawg said:
hey studio, i have a #500mesh on its way to me but it will take some time, i was wondering if there are any other tips to getting huge vapor production? i only have 32ga kanthal, 3 wraps seems to have very high resistance on my gg, aw 18650..
Hi Timmy, this is an exert from one of my earlier posts it should help get your resistance down for the GG and produce much more vapor and flavor:
"You can twist two lengths of 32g Kanthal by folding a 2meter length in half and inserting the bend in a drill chuck and the other loose ends into a vice or clamp, then short slow bursts on the drill will get you twists about 1mm or so apart. This twisted wire will allow you to make a coil with double the wraps and get the same resistance,
or same number of wraps you are currently using with half the resistance (ohms).
Some say a twisted coil is less prone to shorts and more stable.
"
As has been mentioned the video reviewers often "lung inhale" as opposed to mouth then lung inhale, this will create bigger clouds, as will upping the VG content of your
juice.
On a mechanical mod with a twisted 32g kanthal coil you will find 1.2 Ohms is the sweet spot from fully charged 4.2v down to 3.5v. Try to install and wrap you coil on a drill bit first, remove the drill bit, test Ohms then gently twist in your snug fitting wick, you can then test your Ohms when you are happy with your coil glow, and any drop from you original Ohms on the empty coil will signify you still have a short or micro short, and you need to do more dry firing and nudging of the coils before you add juice.
Good luck, and let me know how you go
