New Genesis type atomizer by DID!

[burnie71]

I don't think the kick works below 2 ohms ;-). When I run my DIDs or my AC9, I go pure mech at 0.9-1.1, but when I'm not in the mood to tinker, my kick + boge LRs and my Siam mod tanks are my trusty backups.

If thats the case Kick will not suit my needs either, I am happy with results around 1 & 1.4 ohms. So I guess I need to take past advice + some experimentation and learn how to drive Poldiac to suit my needs.
I have plenty to play with, mesh, wire I mean

 

[burnie71]

Hi to everyone!
My grand father past away!
he was allmost 90 years old and I wish to have his years!
I am not so good as I have those side to chess pains!
Keep on sending me your positive energy!!
Today I made the regular DID with the update for the poldiac
and the capacity is now 5ml
something that you will have soon
when I will be ready to go on again!

Here you are Jim,++++++++++++++++++++ Take things easy mate.

 

[jhjohnson123]

Hey guys, I was wondering about this battery. Batteries : AW Protected 18650 3400 mAh. Please let me know if you think its any good. Thanks.

 

[burnie71]

Hey guys, I was wondering about this battery. Batteries : AW Protected 18650 3400 mAh. Please let me know if you think its any good. Thanks.

Have never heard a bad word for AW, it makes one wonder how they can pack in so much grunt.

 

[Pete54]

Hey guys, I was wondering about this battery. Batteries : AW Protected 18650 3400 mAh. Please let me know if you think its any good. Thanks.

They are Panasonic NCR18650B batteries and have a max discharge rate of 6.8 amps. Here is the same battery in button top. 3400mAh Protected Panasonic 18650 battery cell by Orbtronic
They are a bit longer than AW's but should fit in the Poldiac. I believe that the AW's can handle 10 amp discharge rates. I'm sure "someone" will correct me if I'm wrong.

 

[jhjohnson123]

Thanks guys. I am using the MNKE 18650 right now but was looking for something that lasts longer. No panasonic for me.

 

[Dieseler]

Hi to everyone!
My grand father past away!
he was allmost 90 years old and I wish to have his years!
I am not so good as I have those side to chess pains!
Keep on sending me your positive energy!!

Today I made the regular DID with the update for the poldiac
and the capacity is now 5ml
something that you will have soon
when I will be ready to go on again!

First and foremost take care of yourself and sorry to hear about your grandfather.
Pains in chest area no good , my brother Anthony was only 43 and Dad was 76 now just me.
Hope you have good doctor that takes care of you in need.

Now when you get well and totally well i'll be dancing in the streets to get a 5ml capacity DID
I do not dance but will for that type of DID.

 

[burnie71]

Poldiac Mail!
Polished Brass on the Polished Poldiac.
Brushed Brass on the Brushed Poldiac.

Very nice AG! I'm not being critical or smartass but why are DID and Gemini leaning off? could be my eye's thoughor optical illusion.

 

[Cloud Wizard]

Hey guys, I was wondering about this battery. Batteries : AW Protected 18650 3400 mAh. Please let me know if you think its any good. Thanks.

It's a good IC battery but doesn't have the same high max discharge current that IMR 18650s have (I think they are 5.2A where the IMR is 10A). They are straight Li Ion so not safe chemistry (Like IMR - LiMn) but do have protections circuits added for safety. I'd only use them if I were wrapping above 1.2ohm coils (or a regulated mod).

 

[Uma]

Oh Jim, I'm so sorry for the loss of your GrandFather.

Love the new 5ml DID!!! and BRASS BUTTON!!

Why is Bob Marley singing in my head?

 

[strprswpr]

 

[strprswpr]

 

[strprswpr]

Mini DID

 

[Cloud Wizard]

Hi to everyone!
My grand father past away!
he was allmost 90 years old and I wish to have his years!
I am not so good as I have those side to chess pains!
Keep on sending me your positive energy!!

Today I made the regular DID with the update for the poldiac
and the capacity is now 5ml
something that you will have soon
when I will be ready to go on again!

Thoughts and prayers Jim. Loss is never easy. In those moments I like to think our loved ones have gone to a better place (hopefully somewhere they serve endless beer and 0 calorie cheeseburgers). Thinking of you and your family, get yourself well buddy!

 

[9ball_AJ]

Nice vids Dino. I got some of this ribbon wire in today, and WOW! I setup my short did straight away, and it is performing great!

Are you still using the Special K method to setup coils with this wire?

 

[mikeygar]

@jim - condolences to you and your family. 90 is a grand age, and I'm sure your grandfather lived a full life. I'm sure he's proud of you, simply because of the way you have touched and changed so many people's lives.

I don't think the kick works below 2 ohms ;-). When I run my DIDs or my AC9, I go pure mech at 0.9-1.1, but when I'm not in the mood to tinker, my kick + boge LRs and my Siam mod tanks are my trusty backups.

If thats the case Kick will not suit my needs either, I am happy with results around 1 & 1.4 ohms. So I guess I need to take past advice + some experimentation and learn how to drive Poldiac to suit my needs.
I have plenty to play with, mesh, wire I mean

Agreed, and feel exactly the same with the kick. Bought it because I was curious on what it could do. Does an awesome job of making used boge's taste like new again, but otherwise, the batteries, even when new, don't last so long on it because the cutoff starts kicking in early. Try running 30 or 28 awg coils. I'm on 5 weeks now on my 4/3 28 coil and only slightly need to readjust for hotspots when I dry burn. I dry burn every other tank full and clean my mesh with water, sometimes reoxidize and it's working out okay so far. My 32 awg coils are lucky if they stay a week without popping!

 

[strprswpr]

Nice vids Dino. I got some of this ribbon wire in today, and WOW! I setup my short did straight away, and it is performing great!

Are you still using the Special K method to setup coils with this wire?

Not any more.....LOL

 

[CASEACE79]

Hi to everyone!
My grand father past away!
he was allmost 90 years old and I wish to have his years!
I am not so good as I have those side to chess pains!
Keep on sending me your positive energy!!

Today I made the regular DID with the update for the poldiac
and the capacity is now 5ml
something that you will have soon
when I will be ready to go on again!

Περαστικά φίλε μου.

 

[Pete54]

Dino, I noticed that you've reversed the assembly of the nuts on the positive post. Interesting idea. Was it easier to tighten down? Also, should you, or anyone else, find a source for the ribbon wire, please let us know. I can't fiind it anywhere!
Thanks.

 

[DontBurnIt]

There's a forum member whose husband makes GREAT looking drip tips. They're all hand-made in his workshop here in NM. Check out their work and give them some business. Some tips are lathed from acrylic blanks(like pen-making), others from exotic woods. The woods are hard-coated inside and out so they won't absorb flavors/liquids.

They're really nice people. If you see something you like, Kayte will try to find something similar if possible. They're all one-of-a-kind and highly collectible. I've bought several lately. She posts them online as he gets them ready. People jump on 'em so you have to be quick, or just keep re-visiting until you catch something you like.

Here's a link to the past tips they've sold the last couple of months.

Gallery of Sold Tips

Here's a page near the start of the thread so you can see people's responses as they get posted:

http://www.e-cigarette-forum.com/fo...rum/336795-molehill-mountain-drip-tips-2.html