The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

New Kanger T3 Bottom Coil 2.5 ml Clearomizer

Discussion in 'Cartomizer Reviews' started by txtumbleweed, Oct 1, 2012.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Vaptor

    Vaptor Super Member ECF Veteran

    May 15, 2012
    Remove the wicj seal for no dry hits.
  2. Vaptor

    Vaptor Super Member ECF Veteran

    May 15, 2012
    Yeah you can check my T3 review about that. The rubber seal chokes the wicks. Later I've found that I can also manipulate the ejuice flow (with the seal removed) to the wicks by positioning the tube that pushes on to the wick. If I leave a little gap, it'll wick more. If it wicks too much, remove it, fluff up the wick ends a little and push the tube back all the way down. There is a lot that can be tweaked with the T3. It's the only clearo I can stand to vape. Not perfect but not too bad either.
  3. Kevin Cinar

    Kevin Cinar Unregistered Supplier

    Dec 20, 2012
    United States
    I bought three of them two days ago and put different juice in two of them. However, the first one seems to be ok no gurgle or leak problems but very light draws but the second one kept gurgling and kept leaking for some reason. I try to blow the juice out of the tube but it didnt stop at all. Looks like from the reviews I have read, it starts doing that when the juice gets to about 1ml. has anyone noticed that at all? And the popping noise is a constant problem for me. If you are sitting in a room , someone can easily hear the noise and it is quite annoying but I dont know maybe it s just me. Has anyone figured out a fix for the leaking yet or any theories? I really would like to hear. Thanks..
  4. Vappa

    Vappa Super Member ECF Veteran

    Aug 30, 2012
    Reversing that silicon ring on the coil stopped mine from leaking, gurgling and juice in the mouth piece.
  5. dice66111

    dice66111 Full Member

    I got my first T3s about a week ago and i love them too. I had some flavors that i used in stardusts and it feels like its tastes better. I haven't had any problems with them.
  6. Gibby!

    Gibby! Full Member

    Oct 23, 2011
    ABQ, NM
    How long should you expect the coil units to last on these? I have been using it for about a day and half (heavy!), and just replaced a 1.8 -2.0 unit. Seems a little short to me, I did try to rinse it and dry burn it, but it felt really weak afterward? I did try the reverse the top seal trick, and it stuck to the center post on the tank, no big deal, but when I put the next coil unit on it leaked like crazy lol, just something to be aware of hehe!

    Loving it, just need to work out these little bugs / questions...
  7. Kevin Cinar

    Kevin Cinar Unregistered Supplier

    Dec 20, 2012
    United States
    As far as I know they should last at least a week but I'm sure you will get some defective ones. My first one leaked, second gurgle a lot and my last one seems to be ok now so it's hit or miss.
  8. matty moo

    matty moo Full Member

    Nov 9, 2012
    SE MI
    These things are too hit or miss for me.

    I've bought a total of 9 in the past month.

    1-just leaks. I've flipped the ring, etc.
    3-flood like no tomorrow. Tried flipping the ring, etc. A little gurgling wouldn't bother me, but those three flood out real bad. I doesn't matter what kind of juice it is or blend either. They just flood out.

    Aside from that, I do enjoy the ones that work correctly, and the plastic is more drop-resistant than the ce4's. One of them I use quite a bit and haven't toasted the coil yet
  9. Kevin Cinar

    Kevin Cinar Unregistered Supplier

    Dec 20, 2012
    United States
    Try unscrewing the bottom a little bit. Not too much though where it starts leaking. I heard that may help with the gurgling issue.
  10. mseymour67

    mseymour67 Senior Member Verified Member ECF Veteran

    Nov 18, 2012
    Columbus OH
    I have a couple T3's. They work well as far as vapor and TH, but the flavor is a little muted when using a brand new one. After a couple of refills, the flavor gets better imo.
  11. daftlush

    daftlush Full Member Verified Member

    Jul 21, 2012
    Los Angeles
    How often do you replace heads?

    Sent from my Nexus 7 using Tapatalk HD
  12. John Castle

    John Castle Moved On ECF Veteran

    Sep 12, 2012
    Tempe, AZ
    Mine's still going after a month, but it isn't nearly as strong as it was on day one. So I'd say replace the head every 2-3 weeks.
  13. jacqi4arts

    jacqi4arts Full Member Verified Member

    Jan 16, 2012
    South Texas, U.S.A.
    I bought a Kanger T3 in early December 2012. After a little break in, maybe using about .5 ml of the 1.0 ml I originally put in it to try, the vape was excellent! I love the small Phoenix BCs clearomizers from So, I had to try the Kanger T3 BC clearomizer small tank. :vapor:

    In January 2013, I purchased 2 replacement coils from a different vendor. Both have bad threads. The vendor is sending me new ones, with a return mailer for the defective ones.

    I did a dry burn on my original T3 bottom coil after encountering threading problems with the replacement BCs I ordered. I soaked the original BC for circa 12 hours in bottled water heated to almost boiling to begin with; after running the BC under hot tap water first.
    When the dry burn started, I could see the coil had lost some of its original gusto; so knew it would not return to the vape; it had previously provided. Now, I am waiting on my new replacements.

    I had no probs with leakage and/or any dry hits. However, circa 1x per day, the gurgles started. I just kept tapping the mouthpiece end on a paper towel on the counter until some e-juice finally started coming out of the mouthpiece; after the back-up in the air coil had emptied; then the vape was great again. :vapor:
  14. adrkaushal

    adrkaushal Super Member Verified Member ECF Veteran

    Dec 26, 2012
    i have a question and will appreciate if someone can answer and help this newbie ..

    will this cartomizer (kengerT3 bottom coil) fit on my Mega eGo CE4 battery? here are the battery specifications:

    battery 1100 mAh
    Diameter 14mm
    Length 152mm (w/ tip)
    Normal Voltage 3.6v-4.2v

    And also, if you can recommend any vendor who will ship these on priority (Fedex, etc) to India. Appreciate your help a lot.

  15. jmac1773

    jmac1773 Full Member

    Dec 13, 2012
    McKinney, Texas
    I just got two Kanger T3's from DV. I've only tried one so far but I really like it. I know I can probably find this info somewhere but I'm too lazy to look.... Is the T3 a single or dual coil?

  16. jmac1773

    jmac1773 Full Member

    Dec 13, 2012
    McKinney, Texas
    Oh... one was a T3 and the other was a MT3... if that makes a difference. :)
  17. redfern

    redfern Vaping Master Verified Member ECF Veteran

    Nov 14, 2012
    United States
    I just posted this on another thread hoping for some suggestions.My T3s are leaking from here:
    One after another are starting to leak from this odd place.No visible cracks.just starts pouring down over the battery and my hand.I just opened a brand new one,filled it and it started leaking from here.I am wondering if a bead of glue around the circumference of the plastic tank where it butts up against the metal might be a fix.f so can someone suggest the proper glue to use with this type of plastic?
  18. John Castle

    John Castle Moved On ECF Veteran

    Sep 12, 2012
    Tempe, AZ
    Yikes! Bad batch, maybe? Might do to steer clear of T3s, if so.
  19. denali_41

    denali_41 Vaping Master Verified Member ECF Veteran

    Aug 7, 2011
    Over Der
    the heads are the same for both

    RTV ultra-black food grade
  20. denali_41

    denali_41 Vaping Master Verified Member ECF Veteran

    Aug 7, 2011
    Over Der
    single ...........
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice