New member here. Been vaping for about 2 going on 3 years now.
Went through many pipe mods such as Grand vapor M16, Grand Vapor
Private v2, MCV Panzer, 4nine mod and now vaping on a home made
wood box mod. Im in the process of making another box mod and here are
the specs. Its a fully mechanical mod by the way.
ABS plastic box from Digikey
510 connector from Vapoligy
Sony vtc4 (dual)
18650 single battery holder from ebay (parallel to dual)
2a 36V led angel eye switch from ebay
Now here comes the question portion. I wired it up exactly the same as my
wooden box mod and for some strange reason the negative terminal springs
shrink and gets ruined. Ive tried twice and with the same results. So thinking
I was doing something wrong I tried with a single battery and still no success.
Am I missing something here? I jumpered both negative and made a lead to the
switch and did the same for the positive. Ive been doing alot of reading here and
im pretty im not missing anything. NO wires touching and switch is just doing what
its suppose to do. Lights up when pressed and turns off when not. PLease lead me to
the right direction here. Thanks in advance.
Went through many pipe mods such as Grand vapor M16, Grand Vapor
Private v2, MCV Panzer, 4nine mod and now vaping on a home made
wood box mod. Im in the process of making another box mod and here are
the specs. Its a fully mechanical mod by the way.
ABS plastic box from Digikey
510 connector from Vapoligy
Sony vtc4 (dual)
18650 single battery holder from ebay (parallel to dual)
2a 36V led angel eye switch from ebay
Now here comes the question portion. I wired it up exactly the same as my
wooden box mod and for some strange reason the negative terminal springs
shrink and gets ruined. Ive tried twice and with the same results. So thinking
I was doing something wrong I tried with a single battery and still no success.
Am I missing something here? I jumpered both negative and made a lead to the
switch and did the same for the positive. Ive been doing alot of reading here and
im pretty im not missing anything. NO wires touching and switch is just doing what
its suppose to do. Lights up when pressed and turns off when not. PLease lead me to
the right direction here. Thanks in advance.
Last edited:
