The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

New to Rebuildable need a little help

Discussion in 'Rebuildable Atomizer Systems' started by piggy, Jul 30, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. piggy

    piggy Super Member ECF Veteran

    Mar 5, 2013
    New York
  2. REOfanatic

    REOfanatic Moved On ECF Veteran

    Jan 3, 2013
    Lower the gauge lower the ohms
  3. cra59

    cra59 Senior Member ECF Veteran

    Oct 10, 2012
    East Berlin, PA
    You can try a 30ga wire with a 4/3 rape or you can do a 32ga but twist it
  4. piggy

    piggy Super Member ECF Veteran

    Mar 5, 2013
    New York
    The draw is very tight, so i'm wondering if it has to do with that.
  5. Thrasher

    Thrasher ECF Guru Verified Member ECF Veteran

    Oct 28, 2012
    Madeira beach, Fla
    i use 32 exclusively, even my ribbon is equivalent to 32. that has nothing to do with your problems . i love this atty.
    first the wick is too loose and needs to be firm for best wicking.
    make the coil a little closer to the lip. not right up against the posts.
    take the top, hold it next to the atty and make sure the coil is the same height as the airhole.
    when the cap is on the airhole needs to blow directly on the coil, i usually set the hole to kind of blow at a slight angle, you will know as the vapor is real smooth when its just right,

    and last i opened the airhole to about 1.18mm (just the bit i had under 1.2)

    once you get the wick built correctly the only thing to worry about is how far away the coil can sit away from the airhole if right on the posts.

    i run all my atty on VV around 1.8 to 2.0 at around 3.7 to 4v no problems.
  6. piggy

    piggy Super Member ECF Veteran

    Mar 5, 2013
    New York
    you guys are awesome
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice