Newbies Q&A

[benetay]

.... that means even when i was on analog i was sucking too hard on the ..... I don't think i smoke fast because when i finish 1 analog, my friend usually finish 2. These people smoke about the same amount as me, just that they smoke a lot faster. Now i'll need to try to relax when i vape. However, it ain't easy. Just came back from my run and i realise i was still vaping quite hard, but with the new nic, i soften down a bit because the TH is really thick. I alternate between 12/16 mg.

Cheers!

 

[BladeZ]

16 is still okay to start with.. Me myself started with 18mg n till now it is still the same.. But the difference between now n before is that it seems like i cant take on 18mg anymore soon.. Sometime my heart would beat fast n feel dizzy.. My guess, im need to bring it down soon after my this badge of juice finish..

So basically, whatever what mg u at now, someday u will bring down e mg.. Want it or not, u have too.. Just find ur best mg, enjoy it, till e time u cant take it anymore, lower it down.. My small tiny suggestion..

Cheers..

 

[character]

to begin you can get normal ego then do dripping but a lot messy so i start out using tank system where you put the juice in the tank like the cartomizer now... but eventually there will be a time you would like to upgrade to a better system so MOD has came out ( now I am looking for a MOD ... but expensive )

 

[benetay]

Thanks bro. Cutting down is a great move and I'll embrace that notion.

Cheers!

 

[Insane]

@benetay take it easy... dont rush urself. vaping is all about enjoying + giving up ur analog. slow slow...

 

[tanweisong]

hi! will be collecting my e-cig (eGo-T) soon and I have a few questions to ask.

1) upon collection, is it recommended to dip the atty in hot water and let it dry for 24 hours before first usage? how long to dip it in hot water then? what is the definition of hot water? is there anything else that needs to be done after dipping it in hot water?

2) for the filing of the tank with juice. is it alright to fill to the brim of the tank or better not be?

 

[Paolodicanio]

Wondering if anyone knows a reliable source for juice? I'm interested in 0mg

 

[Popiah]

@Paolodicanio sending you a PM

 

[BladeZ]

@tan

Firsf usage dont need to dip in hot water.. Just blow out the primer of the atty.. The primer is liquids that are inside ur atty to keep it wet.. But its nor really recommended to use the atty without blow out the primer..

For the tank cartridge itself, fill up close to full but leave some space so the juice can flow to the atty easier.. If u dont know the definition of close to full then fill up the tank by half also would do..

Remember..!! Punthrough the cartridge fully.. If not the juice cant flow in to the atty..

 

[tanweisong]

@tan

Firsf usage dont need to dip in hot water.. Just blow out the primer of the atty.. The primer is liquids that are inside ur atty to keep it wet.. But its nor really recommended to use the atty without blow out the primer..

For the tank cartridge itself, fill up close to full but leave some space so the juice can flow to the atty easier.. If u dont know the definition of close to full then fill up the tank by half also would do..

Remember..!! Punthrough the cartridge fully.. If not the juice cant flow in to the atty..

thanks brother for the help

 

[tanweisong]

hi, are the anything else that I have to look out for before using a brand new e-cig? other then blowing out the primer and also ensuring that the tank is pun through fully?

 

[alvinosj]

try not to adjust the position of ur cartridge by turning it when its connected into the atty, because this will cause leakage from the cartridge, if its not align properly and it annoys you, pull out the cartridge and insert back it.

 

[nobodyid]

Hi Guys,
i'm new here and will like to get my e-cigarette.. anyone of you are able to advise me..?

 

[fakeobey]

try not to adjust the position of ur cartridge by turning it when its connected into the atty, because this will cause leakage from the cartridge, if its not align properly and it annoys you, pull out the cartridge and insert back it.

Recently i just got one of the e-cig, well i dont want mention about the brand. Anyway, just after two weeks of vaping, somehow i found it hard to vape and it seems like that are some blockage near the area of air intake. As sure, it forcing me to adjust the cartridge screw to release a bit more air so that smooth vaping can occur. so what is happening =( ???????

 

[wrx]

New to this forum, and PV as well. Could anyone enlighten me on where to buy? Thx.

 

[benetay]

Recently i just got one of the e-cig, well i dont want mention about the brand. Anyway, just after two weeks of vaping, somehow i found it hard to vape and it seems like that are some blockage near the area of air intake. As sure, it forcing me to adjust the cartridge screw to release a bit more air so that smooth vaping can occur. so what is happening =( ???????

Are you using a cartomizer, i believe you do. If the cartomizer is burn or dirty, change a new cartomizer with new e-juice. Remember to wash your mouth pc. too.

New to this forum, and PV as well. Could anyone enlighten me on where to buy? Thx.

Welcome, for purchase of e-cig, please wait for the respective people to PM you for deals.

Cheers!

 

[drjin]

am looking @ purchasing as well =D

 

[drjin]

Replied to all who pm me to help me =) , am looking for more options =D

 

[Washer]

Hi all vapers,
just started vaping about a week ago. Am using a EgoT 639 if i am not wrong.

Got a few questions to ask.

1) I am vaping with methol juice. Initially i will get the chilling effect when i vape...but after a few more puffs it went away. Did some experiment and concluded with this: When i vape, there must be a gap in my mouth such that outside air flows in together, then i will get the chill. If there is no gap, no chill. (i am not sure if this is only me...need help!)

2) it brings me to my second question. Is it the juice that has low effect (80% PG 20% VG)? Or i have to store in the fridge so its cold?

Thanks!

 

[newcomer]

Are you happy with the amount of vapor you get with 80/20 PG based juice?

What menthol juice (brand) are you using?