Newbies Q&A
- Thread starter alvinosj
- Start date
- th_trl_thread_readers 0
- Status
Usual clearo resistance I've used on an Ego Battery is between 2.2 ~ 2.6ohm. Hope this helps!
@drip - Think I'm gonna get another 1.5ohm carto and punch another hole to try with my DCT. I tried with single pre punched but I was getting some serious burnt smell.
@currynoah - Thanks bro, will get another clearo to try out. Is there any difference between vision ego clearo/ce4+/stardust? They all looks the same to me...This design I feel suits me the most, no leak, acceptable size but mine have a bit of burnt smell.
@currynoah - Thanks bro, will get another clearo to try out. Is there any difference between vision ego clearo/ce4+/stardust? They all looks the same to me...This design I feel suits me the most, no leak, acceptable size but mine have a bit of burnt smell.
Seriously? I stopped @ CE2s. Might want to wait for some other bros to help out...
the burt smell? well if something is burnt weather it taste or smell, its probably because the carto is not wet enough.. explain how you start to fill you DCC, for the first time?
Or maybe this may also help u
Filling 510 electronic cigarette cartomizers using the "condom" or "push" method - YouTube
WARNING: had a few carto that DOES NOT work with this method but most of the time it does.
Filling 510 electronic cigarette cartomizers using the "condom" or "push" method - YouTube
WARNING: had a few carto that DOES NOT work with this method but most of the time it does.
Maguro: The differences is the branding, there is the ce4+/stardust/ Turbo/ vision clearo. You might wanna keep your ce4+ aka. stardust, it's actually "rebuild-able" .
just buy some wick/ coil and watch this video,
Gotvapes Stardust: Changing the Wick & Coil - YouTube
TADA~ new ce4+ V.2(longer wick)
as for the carto- pre punched it is more likely what % base you use, if you are using 100%vg then 2-3 hole should work,
I use my DCC pre-punched with 80pg/20vg base and it works great.
just buy some wick/ coil and watch this video,
Gotvapes Stardust: Changing the Wick & Coil - YouTube
TADA~ new ce4+ V.2(longer wick)
as for the carto- pre punched it is more likely what % base you use, if you are using 100%vg then 2-3 hole should work,
I use my DCC pre-punched with 80pg/20vg base and it works great.
Oh, no wonder they all look the same la. Nice video, got to source for wick liao and figure how to break them apart. By the way I am using 50/50 liquid and it seems that they burn quite easily especially on my 1.8-2.0 stardust...not sure if its my ego cannot take LR is it.
As for my 1.5ohm burnt dct, I did it using the same way in the previous video. However, I notice that there is very little bubble coming out. I suspect either is the flow or resistance so I bought another 2.0ohm resistance to try and punched another hole. I notice the flow is very much improved and the cotton inside is wetter but does not give me as good vape as 1.5ohm one. Maybe will try another 1.5ohm with extra hold to see how it performs.
As for my 1.5ohm burnt dct, I did it using the same way in the previous video. However, I notice that there is very little bubble coming out. I suspect either is the flow or resistance so I bought another 2.0ohm resistance to try and punched another hole. I notice the flow is very much improved and the cotton inside is wetter but does not give me as good vape as 1.5ohm one. Maybe will try another 1.5ohm with extra hold to see how it performs.
just give it a dry puff from time to time, inhale without activating the device. 2-3 times should do the trick. or you could enlarge the hole, just be careful not to mess with the coil and stuff inside.
You can mix and match any kind of liquid together,no matter if their nic pg vg level if different or not but if it turn out to be some weird taste,don't blame me :/ but you will never know,you might just create some god juice!
Just be careful when you try to force-push it back, I ruined my first Ce4+ while pushing it back in.
Hey guys, im a newbie and i need recommendations. Anyone with VERY GOOD lobang? Share share or PM me!
Thanks in advance guys!
Thanks in advance guys!
Hi guys.. I'm looking at getting a PV kit soon, probably the Vision eGo C kit from theraliquids. Anyone got any first hand exp with it? And reviews?
Anyway I have some quick questions, hope you peeps here can help me out.
Does vaping REALLY save you the money? I understand that its much more healthy but is the relatively the same price with analogs? Cos I see that there's alot of stuffs that requires maintenance, adding them all together, is it still cheaper than analogs?
Anyway I have some quick questions, hope you peeps here can help me out.
Does vaping REALLY save you the money? I understand that its much more healthy but is the relatively the same price with analogs? Cos I see that there's alot of stuffs that requires maintenance, adding them all together, is it still cheaper than analogs?
- Status
Similar threads
