Newly Redesigned 510LR Atties - SAMPLES on the Way!
- Thread starter EMRocks
- Start date
- th_trl_thread_readers 0
- Status
Hey Deficit,
You really think all the posters that obviously didn't take the time to read your opening post in it's entirety, are now gonna start doing what you ask with regards to feedback? :sarcasm:
Anyway,with regards to the feedback:
It's always made no sense to me for someone to post "My atty lasts for xxx hours/days/whatever".
Any post made with regards to the life of an atty should be answered in millilitres, not time,
To wit, the number of millilitres of juice run through the atty during it's productive life.
If you want to keep track of what voltage (3.2V, 3.7V, 4,2V) the atty is consistenly run at, then that will give an even more accurate assessment of the life of the atty.
FWIW....I have an EM LR510 atty on one of my eGos that I only use about once a week for 5mins. Atty is over 5 months old and still going strong, not surprisingly.
I don't keep track of an indivdual atty's lifespan as I use four different devices (3 X 510, 1 X LR306) each day, depending on where I am sitting, but I do keep track of how often (over a period of months) I replace the attys as a group and since I know exactly how much juice I use on any given day I can calculate the life of an average atty, based on juice consumption.
I'm willing to bet my attys don't last anywhere near as long as most others' do, being I use about 6.5ml juice/day.
HTH
It was my understanding that the original EM LR 510 attys were 1.6ohms give or take the usual + or - 0.3 -----
but anyway, these ones that are coming out are sposed to be 1.6ohms - *** I THINK ****
more later when I hear more from David --------
but anyway, these ones that are coming out are sposed to be 1.6ohms - *** I THINK ****
more later when I hear more from David --------
Obviously,an attys life is dependant on the amount of use and the amount of juice it uses,
when we speak of an atty lasting 10 days,
I hope that you would agree with me that this means 10 days of good usage during those 10 days----
whether it be 10 consecutive days or 10 days over a period of a month -------
My attys get a good workout,
they get used continuously for consecutive days, till they quit on me,
with an average of 15 hours each day,
with approx. 5 mls of juice going thru them each day.
when we speak of an atty lasting 10 days,
I hope that you would agree with me that this means 10 days of good usage during those 10 days----
whether it be 10 consecutive days or 10 days over a period of a month -------
My attys get a good workout,
they get used continuously for consecutive days, till they quit on me,
with an average of 15 hours each day,
with approx. 5 mls of juice going thru them each day.
I use roughly 5ml of juice per day as well. Right now I am using the regular atomizers, and they generally last me at least 2 weeks each. Sometimes a month, sometimes a week. But they usually don't "burn out" or stop working before I consider them done. If I can taste something that tastes like the wick burning, it's done. If I'm no longer happy with the amount of vapor it's producing, it's done.
I've found that various factors seem to play into their lifespan. This is not scientific by any means, just my own observations. When I mix or frequently change liquids / flavors in the same atty, it seems to start clogging it up faster if I don't regularly clean it. Also, if I frequently switch devices with the same atty (510 battery to Riva battery to Indulgence battery), it seems to reduce the lifespan as well (this could be due to a difference in circuitry and/or voltages and milliamps). Of course, making sure to keep the atomizer wet (frequent dripping or keeping your cart topped off) helps them live longer as well (and prevent that burning wick taste). I like to drip, so I usually drip 1-3 drops about every 7-10 puffs.
If you're adamant about making sure to maximize atomizer life to it's fullest potential:
Hope this helps!
I've found that various factors seem to play into their lifespan. This is not scientific by any means, just my own observations. When I mix or frequently change liquids / flavors in the same atty, it seems to start clogging it up faster if I don't regularly clean it. Also, if I frequently switch devices with the same atty (510 battery to Riva battery to Indulgence battery), it seems to reduce the lifespan as well (this could be due to a difference in circuitry and/or voltages and milliamps). Of course, making sure to keep the atomizer wet (frequent dripping or keeping your cart topped off) helps them live longer as well (and prevent that burning wick taste). I like to drip, so I usually drip 1-3 drops about every 7-10 puffs.
If you're adamant about making sure to maximize atomizer life to it's fullest potential:
- Try not to mix too many liquid types / brands / flavors in the same atty very often.
- Try to keep a used atomizer on the same device model you started it on (if you started it on a Riva battery, keep it on Riva batteries).
- Blow all the access liquid out of the atomizer each night, and leave it upside down on a paper towel or napkin overnight.
- Rinse the atomizer out with water a couple times per week. DO NOT USE UNTIL COMPLETELY DRY!!
- Try to keep 3-5 atomizers on a rotation of 2 days. That is, use atomizer #1 for 2 days, switch to atomizer #2 for 2 days, switch to atomizer #3 for 2 days, then switch back to atomizer #1 for 2 days. It helps to give them a break for a few days. This is the perfect time to rinse with water because they'll have ample time to dry.
Hope this helps!
Last edited:
iv had and lr-em5 last for 3+ months of daily usage and it still works lol. i just stopped using it cuz i have more attys and there just sitting there
I have used attys on the same device they started on, and usually keep them to that one device also,
I usually have the Indulgence passthru hooked up to my Self powered hub at my puter desk with its LR510 atty,
at my lounge chair , I have another Indulgence passthru hooked up to another self powered hub there with an 801 Cartomizer on it,
and for walking around, taking the pups out for a pee and such -- lol
I have the riva hooked up with a regular 510 atty --
this is how I go about it all
I mix up my juice in a 100 mls bottle,
and make 3 x 30 mls bottles, these are placed at each place I frequent for ease of usage
My attys usually last me approx 2 - 3 weeks, on average.
the LR510 usually last a month
when they stop producing enuf vapor I change them out for a new one and chuck the old one
I used to subscribe to all the clean this - wash this - soak this - theories,
but I do not bother any more,
it works for as long as it works, and for a couple of dollars I am happy to let it die in peace -- lol.
this is my -- " Modus Operandi "
PS -- I have attys ast for 3 months,
I have also had attys last less than one day -----
I usually have the Indulgence passthru hooked up to my Self powered hub at my puter desk with its LR510 atty,
at my lounge chair , I have another Indulgence passthru hooked up to another self powered hub there with an 801 Cartomizer on it,
and for walking around, taking the pups out for a pee and such -- lol
I have the riva hooked up with a regular 510 atty --
this is how I go about it all
I mix up my juice in a 100 mls bottle,
and make 3 x 30 mls bottles, these are placed at each place I frequent for ease of usage
My attys usually last me approx 2 - 3 weeks, on average.
the LR510 usually last a month
when they stop producing enuf vapor I change them out for a new one and chuck the old one
I used to subscribe to all the clean this - wash this - soak this - theories,
but I do not bother any more,
it works for as long as it works, and for a couple of dollars I am happy to let it die in peace -- lol.
this is my -- " Modus Operandi "
PS -- I have attys ast for 3 months,
I have also had attys last less than one day -----
Last edited:
Hey Di...i would like to try the new ones as well. Been holding off on another large order due to the last ones not being so great. Thanks !
No worries,
I hope there will be enuf for many of you to try them,
the USA guys will contact Chris when the announcment is made----
so watch for it
the rest I think will have to contact Selina -
I dont know if there will be samples anywhere else,
we will have to see, shipping would be prohibitive on one atty to most places in the world..........-
I hope there will be enuf for many of you to try them,
the USA guys will contact Chris when the announcment is made----
so watch for it
the rest I think will have to contact Selina -
I dont know if there will be samples anywhere else,
we will have to see, shipping would be prohibitive on one atty to most places in the world..........-
hello Di, so i need to buy a few stuff from you, but really wanted the LR Attys too, it could be the hold ones no prob, but it looks you haven' them in stock. So is there any chance i get the LR attys? old or new ones that's not really important. I will be making my order maybe today or tomorrow.
I have been a chain vaper since i started about 3 o r 4 months now...
My experience has finally taken me to EM LR 510s as the best atty for 3.7v pv's. IMO. Why?
-Because they are known for being higher Ohm than the 1.5 LR standard, which, many do love.
IMO EM attys are 1.8 Ohm, from the half doz. that i've had and tested, and that's why i think they are the best; not too hot. Vaporful, flavorful.
(no to mention they are reasonably priced!!!)
Your last post said they are 1.6 +-.3 ... that's a huge variance. I know there's variance, but EM's are known for being at least a couple .10's above the 1.5.
If they are 1.5 or 1.6, then I won't want them and i don't think that's what makes them popular... i may be totally wrong here as i don't know if the originalEM LR 510 was really in the 1.5 range.
Because i plan to continue to purchase EM's given they are higher than 1.5, I will try to get a couple to sample.
I have a few of the last batch out, and they are great; measured 1.8 / 1.9 Ohm...
My experience has finally taken me to EM LR 510s as the best atty for 3.7v pv's. IMO. Why?
-Because they are known for being higher Ohm than the 1.5 LR standard, which, many do love.
IMO EM attys are 1.8 Ohm, from the half doz. that i've had and tested, and that's why i think they are the best; not too hot. Vaporful, flavorful.
(no to mention they are reasonably priced!!!)
Your last post said they are 1.6 +-.3 ... that's a huge variance. I know there's variance, but EM's are known for being at least a couple .10's above the 1.5.
If they are 1.5 or 1.6, then I won't want them and i don't think that's what makes them popular... i may be totally wrong here as i don't know if the originalEM LR 510 was really in the 1.5 range.
Because i plan to continue to purchase EM's given they are higher than 1.5, I will try to get a couple to sample.
I have a few of the last batch out, and they are great; measured 1.8 / 1.9 Ohm...
btw, i just googled EMLR 510 and a site states they are 1.7 to 2.2 Ohm... are there lots of different batches out there?
Not trying to give you folks a hard time, it's just that Ohm spec is important to me when i'm buying.
I am totally ok with that spec...
I wish all vendors stated Ohm specs on all their attys. LRs and Reg.
I have a few 18650 mods and one of them hits a little hotter than the others, and 2.2 gives a good vape on it. It's not so great on the other 18650's though.
Not trying to give you folks a hard time, it's just that Ohm spec is important to me when i'm buying.
I am totally ok with that spec...
I wish all vendors stated Ohm specs on all their attys. LRs and Reg.
I have a few 18650 mods and one of them hits a little hotter than the others, and 2.2 gives a good vape on it. It's not so great on the other 18650's though.
If they are on the webshop
they are available,
if not in shop, then thay are out of stock,
and in the case of the LR510 attys -*pulled * from stock
so look for the 510 attys if there then buy - if not -- wait for restock --
they are available,
if not in shop, then thay are out of stock,
and in the case of the LR510 attys -*pulled * from stock
so look for the 510 attys if there then buy - if not -- wait for restock --
OK, -- OK ---
so I am not the sharpest pencil in the box -- hahahahahha
the EM LR510 attys were averageing around 1.6 + or - .03 -- there I think I got it right this time --- lol
anyways as you said, the guys really loved them
and they were loving them at 1.6 and 1.7 also
so we are aiming for the same thing again ------
and yes, the sample is the way to go when they come out ------
we need your feedback -
we do value our customers advice and feedback
it helps us to be better in supplying what you want -----
when the first batch came out there were many variances in the batch
from 1.5 thru 1.9 actually
anything over this we considered a failure.
then we refined it more,
and the following batches were all around 1.6 thru 1.8 I think this is correct
this is where we are aiming anyways -1.6 -- 1.7
this is taken from the feedback from all of you guys
from 1.5 thru 1.9 actually
anything over this we considered a failure.
then we refined it more,
and the following batches were all around 1.6 thru 1.8 I think this is correct
this is where we are aiming anyways -1.6 -- 1.7
this is taken from the feedback from all of you guys
Last edited:
Looks like we might be nearing launch time on these - and they might be within the proper resistance range to work with the Rivas without killing the batteries (these are not like your average 510LR's with regards to resistance, these will be perfected)! David is in the first phase of testing the new 510LR's, and as long as they pass his testing, the samples should be released shortly thereafter!
according to David and others in the office,
the testing of these prototype LR510 attys
is 1.5 -- 1.6
so we think they are good,
cross fingers -------
looking good ---------
I saw them being tested on the webcam conference,
they look really good to me,
and David is happy with the ohms,
so ------------------------------------
the testing of these prototype LR510 attys
is 1.5 -- 1.6
so we think they are good,
cross fingers -------
looking good ---------
I saw them being tested on the webcam conference,
they look really good to me,
and David is happy with the ohms,
so ------------------------------------
yipeee; lol; actually if they are hotter than before, some may not be interested.
there are a whole lot of hard core vapers that love 1.5 (like joye LR 510) but i think a lot more looked to these for a slightly cooler, but vaporful vape.
there are a whole lot of hard core vapers that love 1.5 (like joye LR 510) but i think a lot more looked to these for a slightly cooler, but vaporful vape.
- Status
Similar threads
