Nhaler Update Mega Thread - Everything You Need in One Place!

[Drewsworld]

New Drip-O-Mizers ....Check em out. Drip-O-Mizers

 

[Drewsworld]

I am waiting for DHL to pull up with my New Kits....Cartomizer fans , be on the look out for the latest edition to the Nhaler Arsenal!!!!!

 

[Drewsworld]

They are on the site NOW!!!

Featuring 2 1300 Mah batteries
3ml Cartomizer capacity (5 Included)
Blank Soft Rubber Tipped Easy Fill Cartomizers...

After Months of colaboration with Engineers and 5 prototype versions, they are FINALLY here!!!!


Forget the juice Bottles
Forget the Chargers
Forget the Bottom Feeders
Grab your batteries and a couple cartos and you are good to Go-Go!!!!


Go Go

 

[steakneggs]

What are the differences between this and say an ego or riva?

 

[Drewsworld]

These have a 1300 Mah battery and they utilize a cartomizer rather than an atomizer. These cartomizers hold a full 3ml of liquid, so frequent filling is eliminated and the battery lasts much longer also.
Cartomizers combine the cartridge and the atomizer into one sealed unit....Thanks
Drew

 

[veetvoojagig]

Do these cartos need a syringe to fill, or will condom/spin methods work?

 

[toriL]

wow these look great! are the five cartomizers that come with the kit empty?

 

[Drewsworld]

The carts are empty and they have a tip that pulls out nice and easy and you can just fill them directly from your dropper or dropper bottle...I like to give them a few minutes to absorb the liquid properly and then roll them between my hands(like your trying to warm them up) and then add a few more dropps for good measure...Thanks
Drew

 

[Drewsworld]

Oh and dont forget to Use SAVEinNJ coupon code for 10% off all your kits and supplies!!! Thanks again.
Drew

 

[TypeOholic]

Are the cartos available separately? What type of threads are these? They don't look like 510.

 

[Drewsworld]

They are not available as yet seperately but they will only work on these kits...I will have them up within the next couple days individually. Thanks
Drew

 

[Drewsworld]

Dont miss out on the Free Holiday Goodies....Get in on the Fun!!!!
http://www.e-cigarette-forum.com/forum/nhaler/143645-nhaler-holiday-card-contest.html

 

[Drewsworld]

GO GO kits now reduced to $60...Thats a double 1300 Mah battery kits with 5 Cartomizers (3 Ml capacity) Charger and all!!!! Dont forget SAVEinNJ Coupon Code for an additional 10% off your order!!!!
Hurry up they are only reduced for the Holiday!!!
Go Go

 

[ISBN]

Drew,

I'm really interested in the GO GO but I use kr808d-1 are there any adapters for this so I can still use my cartos?

 

[Drewsworld]

No adapters as of yet...But when I get home I will have another kit up that will be compatible with 510s and take an adapter for Kr8 cartos as well...These cartos are really a great alternative to the KR808 cartomizers for larger (3Ml) capacity and great performance though...
Drew

 

[Drewsworld]

The Ato-Miser is a totally customizable atomizer that is rebuildable and is the last atomizer you will ever need.
If your tired of spending alot of money on atomizers for your mods and like to have multiple options, your going to LOVE this!!!

Comes with everything you need to make 30 atomizers in variable voltages. Non Propietory 510 Connection.

Low Resistance ,High Resistance, Normal Resistance...You pick the range!!!

Easy as pie instructional Video ...


Thanks everyone for your patience as this project has taken me over 5 months of trial and error, to bring these to the market, but I think they are well worth it...
Drew

The Ato-Miser

 

[Drewsworld]

I will be selling the wick and the coils later on and they will be REDICULOUSLY cheap...People will basically be paying for the shipping and the preperaition. Yes you can drip with it...I have been dripping 5 to 10 drops which depending on the thickness and length of the wick you use works very well.

You can buy ALL kinds of wire thicknesses, nichrome content, and and wicking materials for this on ebay,McMaster Carr,MSC Supply,and many other sources, actually too many to list.

I have been tinkering around with different size wires and coil and lengths for months and have had alot of help from a couple guys, and I went with these wires for simplicity.
Those interested in changing resitance and tinkering will have pleanty to do with this unit. I am confident that inevidebly users will come up with new innovative methods that will enhance this product.

Thanks again everyone for your interest.
Have a Happy and Prosperous New year.
Drew

 

[MsOceanCity]

I'm having a little trouble with the kr808 mega cartos. The cartos I'm used to are regular size and have a vertical wire going down the middle of the center hole. These megas are different. It looks like they have a horizontal wire at the bottom. Am I correct? I was able to fill the first time ok, but ran into trouble trying to refill. I blow out excess juice(from the mouthpiece end) then use the drip/spin method. Maybe because these are so much longer, I wasn't able to blow all the old out? Not sure, but I was able to fill 1st time with 65 drops but 2nd time only about 30 and it immediately tasted burnt when I vaped, despite the fact that the batting was saturated and I didn't let it get overly dry or burnt, first time around. There was also a slightly perfumey taste to the carto, even though it was blank. Any suggestions or help would be greatly appreciated!

 

[Drewsworld]

Hi,
What end are you filling from? What is the drip spin method? Also did you let it sit after filling? Check this Video out( right around 4 minutes in shows the Jumbo) and I hope this helps..
YouTube - Nhaler.com - Cartomizers
Thanks
Drew

 

[nervewreckincali]

I will be selling the wick and the coils later on and they will be REDICULOUSLY cheap...People will basically be paying for the shipping and the preperaition. Yes you can drip with it...I have been dripping 5 to 10 drops which depending on the thickness and length of the wick you use works very well.

You can buy ALL kinds of wire thicknesses, nichrome content, and and wicking materials for this on ebay,McMaster Carr,MSC Supply,and many other sources, actually too many to list.

I have been tinkering around with different size wires and coil and lengths for months and have had alot of help from a couple guys, and I went with these wires for simplicity.
Those interested in changing resitance and tinkering will have pleanty to do with this unit. I am confident that inevidebly users will come up with new innovative methods that will enhance this product.

Thanks again everyone for your interest.
Have a Happy and Prosperous New year.
Drew

Hi Drew,

I was speechless with the video. And ya gotta love those scissors, I've been looking all over for those (leg work); used to be all over. What are the chances you'll offer just the mouthpiece and the non proprietary-two-screw set up for less than the price of a whole kit? And is that mouthpiece pretty solid (rate of screw-unscrew to thread fail)? Thanks for any info.