Nuppin'

[Stringer63]

New Nuppin build is amazing. SxD you should really try one of these....

Hey Rattler - can't tell from the angle of your photo but is the center of the coil below the air hole (?) and if so, are you finding that better than a higher placement with the center of the coil even with the air hole?

 

[RattlerX]

Hey Rattler - can't tell from the angle of your photo but is the center of the coil below the air hole (?) and if so, are you finding that better than a higher placement with the center of the coil even with the air hole?

I find the coil needs to be up at the air hole. I've vaped 3 bottles on this build and I like it but I must admit that I have not played with the height much. Initially I lowered it to see if it made a difference and then promptly raised it back up to where I started but not all the way up where the middle of the coil is at the middle of the air hole.

After the Holiday activities end I might play with it a bit more but until then I am vaping like crazy.

 

[muzichead]

I have the original coil and RxW in my Nuppin' that was set up on Nov.1st when I received it. Coil was set at just a smidge below center of the AFC slot and has vaped the best of any atty I have ever set up. It has pretty much been a flawless vape to this point. I really don't see any reason to change it anytime soon either. The RxW still looks like the day I put it in there and showing no signs of breaking down. I do dry burn it to clean it about every 4-5 days though. The coils look a little on the weathered side though, but still vaping great. I think the only reason to change this setup would surely be out of boredom at this point. The only thing I might do differently on the next setup would be to raise the coil to where the middle is even with the AFC so the air flow will flow evenly over and under the coil... Not sure right now...

 

[pauly3]

Where is the Nuppin' available for purchase?

 

[xtreme101]

Where is the Nuppin' available for purchase?

Link to Nuppin'

Update: about 40 left

 

[muzichead]

I just dry burned coils in my Nuppin' and Mephisto this morning. I would say the RxW is holding up pretty good. Still can't believe the Nuppin' build is almost 8 weeks old...

 

[super_X_drifter]

New Nuppin build is amazing. SxD you should really try one of these....

I have one now got it yesterday it's gonna take me a bit to get around to building it though. I need to stay out of the basement for a few days

Happy birthday bro and congrats on that big year of no smokes

 

[mommabird62]

I have one now got it yesterday it's gonna take me a bit to get around to building it though. I need to stay out of the basement for a few days

Happy birthday bro and congrats on that big year of no smokes

You will love it SXD! I have ordered my second one The build is a little awkward at first but once you hold your mouth right to get the coils seated it works out really well. LOL Great flavor atty.

Here is one on a Woodvil

Sent from my iPhone using Tapatalk with my paws

Mommabird62

 

[muzichead]

I have one now got it yesterday it's gonna take me a bit to get around to building it though. I need to stay out of the basement for a few days

Uh oh... Game on my friend...

 

[RattlerX]

I have one now got it yesterday it's gonna take me a bit to get around to building it though. I need to stay out of the basement for a few days

Happy birthday bro and congrats on that big year of no smokes

Thank you ....

Is your arm still sore from all the twisting

 

[Spydro]

I have one now got it yesterday it's gonna take me a bit to get around to building it though. I need to stay out of the basement for a few days

Happy birthday bro and congrats on that big year of no smokes

Hmmm... a bit of a peer pressure buy maybe (although much of it was in jest). If it doesn't work out for you Supe, LMK, I can always find a use for a 3rd one around here.

 

[mommabird62]

Just put together a single coil on the Nuppin this time to compare to duals. Set it just a hair below center of the airflow slot and bam! 1.0 ohm [emoji4]

Sent from my iPhone using Tapatalk with my paws

Mommabird62

 

[Filthy-Beast]

I have one now got it yesterday it's gonna take me a bit to get around to building it though. I need to stay out of the basement for a few days

Happy birthday bro and congrats on that big year of no smokes

Welcome to the dark side

Also there are only 39 or less of the Nuppins left.

 

[built4feel]

Welcome to the dark side

Also there are only 39 or less of the Nuppins left.

Minus 2 more



I love it more everyday. Its nice to have some many options, even though Im building about the same config each time I rebuild, it seems... Oh, and I love the warmer vape @ the same resistence/airflow. Ideal atty for me.... Im finally to the point where I vape it more than I fiddle with the build...

Now I just need both, another reo and a woodvil/resin, to fire them on

 

[Spydro]

Decided not to chance whether Supe will resell his or not after he tries it... he's going to like it. So I ordered Nuppin' #3 before they are gone. But a #4 would also work for me if he does.

Will need to get another LP to run #3 on... only 2 of my 9 Reos are LP's. Either that or send the Mini to the spa (or some of the Woodies) for a haircut and/or 510 upgrade.

 

[Papa_Lazarou]

I have one now got it yesterday it's gonna take me a bit to get around to building it though. I need to stay out of the basement for a few days

Happy birthday bro and congrats on that big year of no smokes

Oh, oh. Here comes trouble. Right here in Reo city. That's trouble with a "t" and that stands for "tuppence" and that rhymes with "Nuppin's". How we gonna keep the boy down on the Odin farm now?

 

[super_X_drifter]

Oh, oh. Here comes trouble. Right here in Reo city. That's trouble with a "t" and that stands for "tuppence" and that rhymes with "Nuppin's". How we gonna keep the boy down on the Odin farm now?

I like the look and feel of my unbuilt Nuppin. I can also tell just by looking at it that its gonna provide a kick AYuss vape. That said, There's something to be said about big, manly Philips head screws all on the same plane that never loosen that I have come to really like about my farm. I've never liked wierd screws and especially despise Allen screws in an atty. But I'll prolly get me some Bits for my driver that fit the nuppin allens. I am anxious to slap it on a mod and build it. I wanna see how it squonks. I may just go build it now. Actually I'm gonna bring my stuff up and build it in my office then I'm technically "not in the basement again"

Pix soon

 

[Rossum]

Obviously it's time to start some popcorn then.

 

[Spydro]

I like the look and feel of my unbuilt Nuppin. I can also tell just by looking at it that its gonna provide a kick AYuss vape. That said, There's something to be said about big, manly Philips head screws all on the same plane that never loosen that I have come to really like about my farm. I've never liked wierd screws and especially despise Allen screws in an atty. But I'll prolly get me some Bits for my driver that fit the nuppin allens. I am anxious to slap it on a mod and build it. I wanna see how it squonks. I may just go build it now. Actually I'm gonna bring my stuff up and build it in my office then I'm technically "not in the basement again"

Pix soon

Mine squonk way easier/better than any of the other bf atty's I have that I've used so far, bar none.

 

[super_X_drifter]

I hate you bassturds. Yes this little atty does vape amazing and yes ^ the squonk drain is off the chain. Best I've seen too.