OBS Engine NANO RTA

[Eskie]

Well subtanksupply finally has them in house, just ordered the BLACK version, if I like it I'll find a GOLD version, but Subtank does not carry the gold. Sorry, I won't be constantly updating the shipping status.

Curious to see if it's better then my current favorite, the Merlin Mini. Wish there were a 22/23mm version, 25 is too big for many of my smaller mods. Was not thrilled with the Ammit single coil rta, but the LEAK FREE feature of this tank is what interests me the most, assuming it is on par flavor wise with the MM.

Yup, that's what I'm sitting it out for. A 22/23 mm single coil Engine. I love my 25 mm dual Engines and the single coil Engine doesn't fill a slot in my rotation the way a 22 mm would. They already make a 23 mm Engine, so why not do the same? Picture a Pico with a single coil Engine. It' the perfect pocket carry setup with zero (OK almost zero) worry.

 

[Mactavish]

Yup, that's what I'm sitting it out for. A 22/23 mm single coil Engine. I love my 25 mm dual Engines and the single coil Engine doesn't fill a slot in my rotation the way a 22 mm would. They already make a 23 mm Engine, so why not do the same? Picture a Pico with a single coil Engine. It' the perfect pocket carry setup with zero (OK almost zero) worry.

The 23mm engine is a dual coil base. I like single coil offset bases, like the Merlin Mini. I don't like using plugs on dual coil bases either.

 

[Heartsdelight]

3*30/38g ss316L Fused Claptons made with my Daedalus Coilmaker 3.5mm I.d. 7 wraps, .48 ohms wicked with rayon.

 

[Heartsdelight]

Ok thanks you just talked me into one lol. Picked one up about 30 min

Nice looking couple!

 

[Eskie]

The 23mm engine is a dual coil base. I like single coil offset bases, like the Merlin Mini. I don't like using plugs on dual coil bases either.

Yup. Which is why I don't have it. I want the 23 mm with a proper single coil deck. I know I can build to bridge the posts, but I'd rather have the airflow pattern dedicated to a single coil placement.

 

[Heartsdelight]

Well subtanksupply finally has them in house, just ordered the BLACK version, if I like it I'll find a GOLD version, but Subtank does not carry the gold. Sorry, I won't be constantly updating the shipping status.

Curious to see if it's better then my current favorite, the Merlin Mini. Wish there were a 22/23mm version, 25 is too big for many of my smaller mods. Was not thrilled with the Ammit single coil RTA, but the LEAK FREE feature of this tank is what interests me the most, assuming it is on par flavor wise with the MM.

Portable enough?

 

[Don29palms]

I don't see a big deal of wrapping the coil counter clock wise...

Neither do I. I wrap them either way myself.

 

[ricks]

I can go both ways...

 

[Vinnybagodoughnuts]

Yeah! Mines ready to ship!!!

 

[TrollDragon]

Ok thanks you just talked me into one lol. Picked one up about 30 min

Congrats!
Those are really sharp looking rigs.

Much love for the Combo, I have quite a few of the different decks and the RDA base for it. Don't waste your time on any of the postless ones and the RDA base leaves a lot to be desired as well. Works just fine with the included Goon & Velocity style ones.

Sweet mod too.

 

[TrollDragon]

View attachment 637417 3*30/38g ss316L Fused Claptons made with my Daedalus Coilmaker 3.5mm I.d. 7 wraps, .48 ohms wicked with rayon.

Very Nice!
How's it vape?

 

[TrollDragon]

Yeah! Mines ready to ship!!!

Good to see you here Vinny!

 

[Heartsdelight]

Very Nice!
How's it vape?

Very nice! Flavor & vapor production doesn't disappoint

 

[TrollDragon]

Ive been running a bb and bbb both with the Q2 .4 coil. Its "rated" to 80 watts, but have you ever used one at 80? It starts getting real warm at 60, 80 is hot! Personally, I like a much cooler vape. 45 was perfect as far as vapor production, but flavor wasnt great at all. I backed it down to 33 where I found flavor best for ME. Could be part of the juice im using, need to go through some V3 and WJLC I have on hand. But that has nothing to do with heat, and at 80 it may come alive, but it wont for me, because quite frankly if I have to vape hot ill quit and keep smoking. We're all different in our needs, what works for you may not be right for me.

Ooops my bad, I wasn't telling you how you should vape.

All we have down at the shop is the full sized TFV8 with Q4, X4, T8 and T10 coils installed in them. Those are run at 100W or higher on the T8/T10 heads and they are not hot. Since we didn't get in any Baby Beasts (the 3ml capacity didn't look too appealing in a juice burner), I've never actually tried a Q2 coil. I now see where you are coming from with the 33W setting.

Teach me to half read a post...

Enjoy the Nano and what works for you.

 

[Heartsdelight]

Not sure why all the struggle. Original, new V4 CM, price of a Chinese sourced RTA, or half the price of US sourced RTA!

https://www.amazon.com/Coil-Master-...&qid=1487959520&sr=8-2&keywords=coilmaster+v4

It doesn't look that different than the v3. Maybe the pics don't show it that well.
Anyone have the v3 & v4? Differences?

 

[Gallant]

The only difference is V4 has a silicon holder while V3 has a bag

 

[Mactavish]

There is some kind of slot in the top to help hold a larger coil, read the description and looked at the photos. I have the V3, no reason to upgrade, but if I did not own a V1, and V3, I'd buy the V4.

 

[Heartsdelight]

The only difference is V4 has a silicon holder while V3 has a bag

I have the Coilmaster kit v3 & it comes with the silicone case too! Thanks Gallant!

 

[Heartsdelight]

There is some kind of slot in the top to help hold a larger coil, read the description and looked at the photos. I have the V3, no reason to upgrade, but if I did not own a V1, and V3, I'd buy the V4.

You're right on closer inspection it does have a slot on top. Yeah I have a v2 & v3 kit.

 

[Gallant]

I have the Coilmaster kit v3 & it comes with the silicone case too!

My V3 did not come with 1