OBS Engine NANO RTA

Jump to latest Follow Reply
Status
Not open for further replies.
Sort by date Sort by reaction score
dampfan

dampfan

Full Member
Jan 3, 2016
26
43
58
Germany
Finally i found a build for my Nano that delivers me good flavor and decent vapor.

ordinary 0.45mm stainless steel wire (no clapton/juggernaut/twistedfusedtralalala), 4 mm inner diameter, 8 wraps, 0.65 ohms, spaced, placed rather high and with good distance to the posts, wicked with ordinary cosmetic organic cotton. the ends of the cotton are layed on the deck, not put through the liquid holes on the deck.
no dry hits, no flooding.
i am vaping it right now at 30 watts (4.6 volts). vapor is not extraordinary but ok for me, flavor is on par with Merlin, Ammit and Taifun GT III.
airflow control is almost fully open.

liquid used: 75% vg 5% water 20% pg, Inawera cactus lime flavor (deliciousssssss)
:);):D
 
  • Like
Reactions: Heartsdelight, TrollDragon and hittman
Eskie

Eskie

ECF Guru
ECF Veteran
Verified Member
May 6, 2016
16,087
77,744
NY
GccTxs67 said:
I can't express enough the difference in flavor when I switched to a fused Clapton.....

Anyone know a good place online to buy them pre made?


Sent from my iPad using Tapatalk
Click to expand...

PM a guy @B_D_Builders . Really nice work and excellent customer service, as in get on the phone and chat about exactly what you want, pros and cons, and a pleasure to deal with.
 
  • Like
Reactions: Heartsdelight and TrollDragon
Vinnybagodoughnuts

Vinnybagodoughnuts

Ultra Member
ECF Veteran
Nov 19, 2015
1,532
3,713
56
Yuck.Post holes are not offset! Why do these companies feel they can just change these things whenever they feel like it? I know it seems like a small thing but its the principal that really bothers me.I want what was advertised and promised.Is that asking too much????:facepalm:
I am going to open a support ticket.It may not help remedy my situation but it sure will make me feel better......
 
  • Like
Reactions: Eskie, pahick, ricks and 4 others
TrollDragon

TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
Vinnybagodoughnuts said:
Yuck.Post holes are not offset! Why do these companies feel they can just change these things whenever they feel like it? I know it seems like a small thing but its the principal that really bothers me.I want what was advertised and promised.Is that asking too much????:facepalm:
I am going to open a support ticket.It may not help remedy my situation but it sure will make me feel better......
Click to expand...
If it really bothers you that much we can trade bases... (Black) :w00t: :lol:
 
  • Like
Reactions: Eskie, Vinnybagodoughnuts, Heartsdelight and 1 other person
Heartsdelight

Heartsdelight

Vaping Master
ECF Veteran
Nov 10, 2015
5,777
19,659
dampfan said:
Finally i found a build for my Nano that delivers me good flavor and decent vapor.

ordinary 0.45mm stainless steel wire (no clapton/juggernaut/twistedfusedtralalala), 4 mm inner diameter, 8 wraps, 0.65 ohms, spaced, placed rather high and with good distance to the posts, wicked with ordinary cosmetic organic cotton. the ends of the cotton are layed on the deck, not put through the liquid holes on the deck.
no dry hits, no flooding.
i am vaping it right now at 30 watts (4.6 volts). vapor is not extraordinary but ok for me, flavor is on par with Merlin, Ammit and Taifun GT III.
airflow control is almost fully open.

liquid used: 75% vg 5% water 20% pg, Inawera cactus lime flavor (deliciousssssss)
:);):D
Click to expand...
When you say with good distance to the posts do you mean far from or close to the posts?
 
  • Like
Reactions: Eskie, ShowerHead, Vinnybagodoughnuts and 1 other person
ricks

ricks

Vaping Master
ECF Veteran
Verified Member
Jan 11, 2011
7,245
10,303
61
Moscow PA
Vinnybagodoughnuts said:
Yuck.Post holes are not offset! Why do these companies feel they can just change these things whenever they feel like it? I know it seems like a small thing but its the principal that really bothers me.I want what was advertised and promised.Is that asking too much????:facepalm:
I am going to open a support ticket.It may not help remedy my situation but it sure will make me feel better......
Click to expand...
I just don't get it... Maybe they'll send you another???
 
  • Like
Reactions: Eskie, Heartsdelight, ShowerHead and 2 others
Vinnybagodoughnuts

Vinnybagodoughnuts

Ultra Member
ECF Veteran
Nov 19, 2015
1,532
3,713
56
TrollDragon said:
If it really bothers you that much we can trade bases... (Black) :w00t: :lol:
Click to expand...
O.K. :pervy:

ricks said:
I just don't get it... Maybe they'll send you another???
Click to expand...
I don't either Rick! Maybe because people were complaining about coiling it in a different direction??
It just makes it harder to coil especially with coils like Claptons. It also distorts the coil causing you to play with it to get it straight.Just irritating! Nothing I can't handle of course being the master builder I am.lol
 
  • Like
Reactions: Eskie, Heartsdelight, hittman and 5 others
Vinnybagodoughnuts

Vinnybagodoughnuts

Ultra Member
ECF Veteran
Nov 19, 2015
1,532
3,713
56
First build. 2.5 mm single core clapton SS 26G/36 Kanthal .58 ohms running at 400degrees on VT75. KGD cotton.
Pro's- Good capacity easy to fill. Good flavor and heaps of airflow.I mostly DTL and had to shut down the airflow 75%.Nice looking tank.(Black)
Cons- Post holes, difficult to disassemble, difficult to clean and dry,Hate the short driptip.

As far as flavor it is difficult at best to compare atties.We see this by the number of opposing views on every tank.
Overall I am happy with it so far but I always like to reserve judgement until I have some long term hands on.
I will post some pics of my build next time I rebuild it but I placed the coil top even with the top of the posts.The air holes seem fairly high up on the build deck and as with my Narda getting the AF close to the bottom of the coil is essential to good flavor and less turbulent airflow.I also have the coil fairly close to the posts to keep it centered.:)
 
Last edited:
  • Like
Reactions: man00ver, Eskie, Heartsdelight and 3 others
ricks

ricks

Vaping Master
ECF Veteran
Verified Member
Jan 11, 2011
7,245
10,303
61
Moscow PA
Vinnybagodoughnuts said:
First build. 2.5 mm single core clapton SS 26G/36 Kanthal .58 ohms running at 400degrees on VT75.
Pro's- Good capacity easy to fill. Good flavor and heaps of airflow.I mostly DTL and had to shut down the airflow 75%.Nice looking tank.(Black)
Cons- Post holes, difficult to disassemble, difficult to clean and dry,Hate the short driptip.

As far as flavor it is difficult at best to compare atties.We see this by the number of opposing views on every tank.
Overall I am happy with it so far but I always like to reserve judgement until I have some long term hands on.
I will post some pics of my build next time I rebuild it but I placed the coil top even with the top of the posts.The air holes seem fairly high up on the build deck and as with my Narda getting the AF close to the bottom of the coil is essential to good flavor and less turbulent airflow.I also have the coil fairly close to the posts to keep it centered.:)
Click to expand...
Sounds good to me. I hate the drip tip too. Can't stand these wide open short mouth pieces...
 
  • Like
Reactions: oldude 61, Eskie, Heartsdelight and 4 others
TrollDragon

TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
Vinnybagodoughnuts said:
First build. 2.5 mm single core clapton SS 26G/36 Kanthal .58 ohms running at 400degrees on VT75.
Pro's- Good capacity easy to fill. Good flavor and heaps of airflow.I mostly DTL and had to shut down the airflow 75%.Nice looking tank.(Black)
Cons- Post holes, difficult to disassemble, difficult to clean and dry,Hate the short driptip.

As far as flavor it is difficult at best to compare atties.We see this by the number of opposing views on every tank.
Overall I am happy with it so far but I always like to reserve judgement until I have some long term hands on.
I will post some pics of my build next time I rebuild it but I placed the coil top even with the top of the posts.The air holes seem fairly high up on the build deck and as with my Narda getting the AF close to the bottom of the coil is essential to good flavor and less turbulent airflow.I also have the coil fairly close to the posts to keep it centered.:)
Click to expand...
Good Luck on your nano journey. ;)
What wire profile are you using for TC on the mixed clapton?
 
  • Like
Reactions: Eskie, Heartsdelight, ShowerHead and 1 other person
Vinnybagodoughnuts

Vinnybagodoughnuts

Ultra Member
ECF Veteran
Nov 19, 2015
1,532
3,713
56
ricks said:
Sounds good to me. I hate the drip tip too. Can't stand these wide open short mouth pieces...
Click to expand...
It looks nice but it puts my lips and chins too close to the airflow.lol

Thank you Rick it seems like a winner to me so far.
TrollDragon said:
Good Luck on your nano journey. ;)
What wire profile are you using for TC on the mixed clapton?
Click to expand...
Thanks TD.Its pretty close to the default SS profile.I just lowered the wattage a tad.

Edit- Forgot to mention it is a spaced coil as I was having difficulties using a tight wrap Clapton in TC.(It would vape fine for a while then go anemic)
 
  • Like
Reactions: Eskie, Heartsdelight, TrollDragon and 1 other person
markfm

markfm

Aussie Pup Wrangler
ECF Veteran
Verified Member
Jul 9, 2010
15,268
45,866
Beautiful Baldwinsville (CNY)
ricks said:
Sounds good to me. I hate the drip tip too. Can't stand these wide open short mouth pieces...
Click to expand...
Fortunately it's a standard 510, easy to substitute another. (Fingernail between the top cap and drip tip flared section, it'll lever out easily enough) In my case this is the first time I stuck with the vendor dt - all my other tanks get an FT glass & SS tip.
 
Last edited:
  • Like
Reactions: Eskie, Heartsdelight, TrollDragon and 1 other person
Status
Not open for further replies.

Similar threads

mimöschen
  • Locked
OBS Engine II
Replies
95
Views
12K
RTA
SnapDragon NY
SnapDragon NY
F
  • Locked
New Arrival ! $22.99 OBS Engine NANO RTA Atomizer
Replies
0
Views
583
Efun.Top
Focus H
F
SupplyDaddy
  • Locked
OBS Engine Nano's gone.. What to replace it with?
Replies
11
Views
3K
RTA
Herrick
Herrick
shatteredsoul76
  • Locked
OBS Engine 25 or Sapor RTA 25?
Replies
8
Views
2K
RTA
vexx
vexx
hiclass
  • Locked
Side-posts-deck RTA wave
Replies
0
Views
519
RTA
hiclass
hiclass

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)
Top Bottom
Jump to latest Follow Reply
Jump to latest Follow Reply
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu