Official DNA 40 introduction

[ukeman]

I am sold on the tech... and normally I'd jump at the first run of either of these 2.

But I am getting fabulous vapes off my 2 30w boxes right now (one is a dna30), not to mention the high watt boxes I have, and i will wait until I get a shot at a Flask or other larger box with dna40 inside be it vendor or custom made... so have at it tomorrow morning.

 

[Tbev]

It should not be hard, I can't wait.!

 

[KenD]

You how have been beta testers, tell me if I'm getting it right. Even with 32ga nickel200 it's pretty much impossible to have a dual coil above 0.2 ohms, unless you use a really large coil diameter and an insane number of wraps? My problem is that I don't like wire over 28ga, and using a coil diameter larger than 3mm seems unwieldy (particularly with something like the Fogger v4). The lowest resistance the dna 40 can use is 0.1 ohms, right?

And hitting 1 ohm, even with really thin wire, is basically impossible (practically impossible at least)?

 

[mikepetro]

You how have been beta testers, tell me if I'm getting it right. Even with 32ga nickel200 it's pretty much impossible to have a dual coil above 0.2 ohms, unless you use a really large coil diameter and an insane number of wraps? My problem is that I don't like wire over 28ga, and using a coil diameter larger than 3mm seems unwieldy (particularly with something like the Fogger v4). The lowest resistance the dna 40 can use is 0.1 ohms, right?

And hitting 1 ohm, even with really thin wire, is basically impossible (practically impossible at least)?

Evolv's specs say the low end with NI200 is 0.1 ohm, however, many of us on the beta team made coils below that. I was doing a bunch at 0.08 and I saw others doing 0.06 ohms. I suspect you will be able to make a coil that suits you.

 

[dr g]

Evolv's specs say the low end with NI200 is 0.1 ohm, however, many of us on the beta team made coils below that. I was doing a bunch at 0.08 and I saw others doing 0.06 ohms. I suspect you will be able to make a coil that suits you.

Not only that but what someone "liked" with kanthal isn't relevant anymore.

 

[KenD]

Not only that but what someone "liked" with kanthal isn't relevant anymore.

My dislike for over 28ga wire is that it's difficult to work with (I'm a sloppy builder). Is nickel easier to work with, more rigid and less springy?

 

[mikepetro]

My dislike for over 28ga wire is that it's difficult to work with (I'm a sloppy builder). Is nickel easier to work with, more rigid and less springy?

You will find that NI200 is easier to work with as it is softer and less springy.

 

[dr g]

My dislike for over 28ga wire is that it's difficult to work with (I'm a sloppy builder). Is nickel easier to work with, more rigid and less springy?

It may be a little challenging at first but you will learn how to use it. And you will want to

 

[HgA1C]

and their live XPV DNA-40D with Temperature Protection | Protovapor.com

 

[peraspera]

Hyperion has 6 DNA 40 Hana Modz left.

Vapor Shark is taking preorders for the Vapor Shark rDNA. Once you put one in the cart it reads, "* Pre-Order, All NEW rDNA's will ship Tuesday 10/28/14." The site indicates shipping labels are automatically created for UPS shipping but I already got a shipping notification email with tracking for the USPS shipping option I chose. Sent a note to CS but I'm nearly dead certain the VS has not shipped.

 

[350ZMO]

Does anyone know when the boards will be available?

 

[bobflanders86]

today the 14th

 

[350ZMO]

today the 14th

I realize that, but they aren't yet.

 

[GerhartCss]

Not sure about the reputation of the site, but they are listed here: DNA 40 associated products – Vape Dojo

Also, has anyone heard anything about when and where the Vapor Flask DNA 40 will be offered?

 

[350ZMO]

Not sure about the reputation of the site, but they are listed here: DNA 40 associated products – Vape Dojo

There we go, Thank you, google lists them at 3.5 stars, think I'll wait for Evolv.

 

[bobflanders86]

I don't want to worry about installing the chip, I want a whole device with the chip installed. I see the price around $200-250, that's a little steep for me. Will I be happier with a cheaper protovapor, maybe I should I splurge for a shark, or maybe the hana is good enough. I don't want to buy each to know the differences.

 

[GerhartCss]

There we go, Thank you, google lists them at 3.5 stars, think I'll wait for Evolv.

Reddit post claims the will ship tomorrow and have plenty of stock. You could call and ask them. http://www.reddit.com/r/electronic_.../got_off_the_phone_with_vapedojocom_they_are/

 

[350ZMO]

Reddit post claims the will ship tomorrow and have plenty of stock. You could call and ask them. http://www.reddit.com/r/electronic_.../got_off_the_phone_with_vapedojocom_they_are/

Thanks, I read the google reviews and the negatives were about their poor customer service, return policy and juice inconsistency, as long as they deliver actual working boards then all is good, I'll take a stab.

 

[coaldriller]

Still think i'll wait on evolv

 

[STEAM_P0WERED]

DNA40 by Evolv – Hyperion Vape

I picked one up here this morning. I bought 2 dna30 boards from them a few months ago and haven't had any trouble with them.