Official ProVari 3 Thread - P3

Status
Not open for further replies.

The Ocelot

Psychopomp
ECF Veteran
Verified Member
Aug 12, 2012
26,497
79,193
The Clock Barrens, Fillory
Thanks for your input. I currently am vaping 1.8 ohms with perfection vapes reduced pg blend. I don't care about sub ohming, I more so care about clouds. I am pretty satisfied with the clouds I can blow sometimes, but I do wish they could be a little bigger. Also I should probably mention that when I vape 1.6 ohm coils in my nautilus and turn down my voltage a little bit to around 3.6-3.8 volts it vapes a little too hot for me and burns the throat a bit too much for my liking. (I prefer little throat hit.) But if I turn my voltage down any lower than 3.6 my clouds are far too small for what I am looking for. I know I can't have everything, but I just want slightly bigger clouds.

Also it should be noted I am not interested at all in rebuilding.

Thanks again for your input ocelot.

Sent from my XT1096 using Tapatalk

It can take some experimenting with different flavors themselves, not just increasing the vg level. There are some flavors that burn my throat/lungs, no matter what temperature I'm vaping at. Too much nicotine can burn as well and often has a peppery taste.

At this moment I'm vaping on a HyperTank. It's a glass clearo with a decorative outer sleeve. They use regular Protank/EVOD coils, but are less fussy and (I think) have noticeably better flavor. They are also inexpensive should you feel like trying something a little different. I'm current vaping a 2.0Ω coil at 4.5v. and getting clouds similar to the picture I posted above.

HyperTank
 

JohnD0406

Ultra Member
ECF Veteran
Verified Member
Sep 6, 2013
1,264
4,294
Los Angeles, CA
So I have a ProVari mini 2.5 currently with an aspire nautilus mini tank sitting on top. Love the aspire.

I have a v2.5 with mini Nautilus - it's a great combination. I'm running my 1.8 ohm coil at 5.2V (15W) on the largest air hole. Never a misfire, never a dry hit, and still a cool vape. I also have an Atlantis on a mechanical (0.5 ohms @ 4.2V = 35W). I like the Nautilus better - better flavor, and the Atlantis spits juice in my mouth.

Also it should be noted I am not interested at all in rebuilding.

Well, at some point, you need to make the switch if you want bigger clouds. I typically vape 0.4 ohms with a dual-coil dripper (~44W), which is perfect for me. Coil building is getting easier with more tools on the market, but really never was all that difficult. It's nice to buy a bag of cotton balls for $3, 100ft. of wire for $8, and know you're set for the rest of your life.
 

Pinggolfer

Vaping Master
ECF Veteran
Verified Member
Jul 28, 2013
6,891
18,798
The Clemson Tigers State
Well can we go back to batteries. I've been using the AW IMR 18490 and 18650's but I also have used the Orbtronic PD 2900 10 amp and I have to say they last almost 2 days in my P3. Of course I still use my 2.5's which are not smart enough to have a IQ, but always fire. What other batteries are you using in your P3?
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
33,000
183,169
Midworld
Well can we go back to batteries. I've been using the AW IMR 18490 and 18650's but I also have used the Orbtronic PD 2900 10 amp and I have to say they last almost 2 days in my P3. Of course I still use my 2.5's which are not smart enough to have a IQ, but always fire. What other batteries are you using in your P3?

You have NO IDEA how tempting this is for me to type something TOTALLY inappropriate.

(sigh)

The sacrifices we make...
 

Pinggolfer

Vaping Master
ECF Veteran
Verified Member
Jul 28, 2013
6,891
18,798
The Clemson Tigers State
Dag-gummit!!! I was trying to steer us away from the eye-kyoo topic...foiled again!

You just had to get back on the subject. I tried to talk about batteries but you wouldn't allow it to continue. Please don't bring up the subject. We need to talk more about BOOST...
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
33,000
183,169
Midworld
You just had to get back on the subject. I tried to talk about batteries but you wouldn't allow it to continue. Please don't bring up the subject. We need to talk more about BOOST...

Welp, I dunno what THAT'S got to do with anything, but if you insist...

boost-plus-chocolate-12-pack-large.jpg

I prefer chocolate.
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,047
OK I need the IQ Master HB. I tried to stop looking at the IQ but just had to check it just a minute ago. It read 53 poor, so I turned the end cap one thread open and then tight again and IQ read 90 Great. Why?

Mine does that all the time. Low IQ, I just unscrew a half turn, rescrew and it's in the 90's.
 

AstroTurf

Happy to be... Not Smoking!!!
ECF Veteran
Verified Member
Sep 27, 2014
11,385
48,544
Happy to be... Not Smoking!!!
OK I Wanna Play Too...

********** P3 DISCHARGE TEST **********

12/08/2014 8:24 PM
P3 Beta v36
Efest 18500 Purchased in 09/2014
IQ 81
Battery 01%

12/07/2014 8:08 PM
P3 Beta v36
Efest 18500 Purchased in 09/2014
IQ 80
Battery 01%

12/06/2014 11:59.59 PM
P3 Beta v36
Efest 18500 Purchased in 09/2014
IQ 80
Battery 01%



Will update this every evening before bed for the next week or 2 or 3...

LOLz, Jim
 

HBcorpse

Vaping Master
ECF Veteran
Verified Member
Jul 23, 2013
4,378
14,478
OK I need the IQ Master HB. I tried to stop looking at the IQ but just had to check it just a minute ago. It read 53 poor, so I turned the end cap one thread open and then tight again and IQ read 90 Great. Why?

Mine does that all the time. Low IQ, I just unscrew a half turn, rescrew and it's in the 90's.

The only thing I can think of, is you're changing the contact point between the battery and spring...or the battery and chip contact.
Kinda like when you rough up the terminals of a car battery, to get a better contact...
By turning the cap, you're causing just enough rotation inside, for the battery to make a slightly different contact, and get a "better" reading...
We may actually be seeing the manifestation of carbon build up between battery contact points...you all know this as the little black marks that need cleaning from the ends of your batteries from time to time.
I can't imagine the P3's IQ program is sensitive enough to pick this up, during a single charge span of a battery, but hey...we've all "oohed and aaahed" over how impressive this 32bit ARM chip is...
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread