Thanks and that's the truth. You don't know how close my shiny new KFL+ was to flying off my 9th floor balcony. Yes it was!
Official ProVari 3 Thread - P3
- Thread starter Vape360
- Start date
- th_trl_thread_readers 0
- Status
Thanks and that's the truth. You don't know how close my shiny new KFL+ was to flying off my 9th floor balcony. Yes it was!
Should you ever get to that point again, please feel free to send it off to "Tim's Home for Abandoned, Discarded, Forgotten, and Neglected vape Gear", c/o ThePaladin...
Proud Provarinati...
What makes the Kayfun such a great atty imo, is the density of the vapor stream.
They don't need a lot of power to produce a strong hit, so they work equally well with regulated or unregulated mods.
They really work well even as low as 3.7-3.8V, which is perfect on a mech.
Still one of the best attys out there and the most influential in terms of design.
They don't need a lot of power to produce a strong hit, so they work equally well with regulated or unregulated mods.
They really work well even as low as 3.7-3.8V, which is perfect on a mech.
Still one of the best attys out there and the most influential in terms of design.
I'm having to relearn ohm vs volts vs watts on this thing. I think one of my issues was I was pushing it too hard and that made the taste degrade quickly. Tonight, on a 1.5 ohm coil, I'm running at 9.4 watts 3.9 volts and the taste is simply awesome. Awesome I'm telling you! I would imagine the wick will last longer as will the battery throughout the day, which makes the KFL+ even better!
Try to disregard the amount of vapor production on the KF.
It's not so much the big clouds with a Kayfun.
It's the really solid TH and flavor.
You're golden as long as you are getting those Two things imo.
It's not so much the big clouds with a Kayfun.
It's the really solid TH and flavor.
You're golden as long as you are getting those Two things imo.
I have been riding. For the last 6 months I've been horseless (for the first time in 25+ years), but now I have a new friend. I forgot how long it takes to bond with a new horse, so it's everyday in a round pen - going around and around and around and around and around
Congratulations! I'm sure the hard work will be well worth it. Horses actually scare me to death and they know it. I was thrown from one as kid and my fear can be smelled a mile away!
You've got it, yes you do! When the horse doesn't know you it will test what it can get away with. She was full of it today, but I'm used to riding much hotter horses, so her pretending to try and throw me didn't work. She's actually a nice horse, she just hasn't been ridden consistently for awhile.
LOL....I'm not sure I'm ready for a Kayfun to control my destiny, but what the hey, there are far worse things that could, so OK, I'm in!
Congratulation Sir Rod! It is a great vape. If I had a crystal ball. I would see a KF4 in your future. I'm thinking 3 to 6 months. Same great vape and easy to fill.
Well, It came yesterday...
A brand spankin new Provi Ti P3
As soon as I got back to my van, I pulled the Kayfun and battery from my Provi Beta P3 and went to town.
W O W , Its so Light...
How light is it?
Its so light that... It makes the Stainless P3 feel like a kettle weight.
Love it Love it Love it!!!
Worth the Money? YES!!!
That is all, Jim
A brand spankin new Provi Ti P3
As soon as I got back to my van, I pulled the Kayfun and battery from my Provi Beta P3 and went to town.
W O W , Its so Light...
How light is it?
Its so light that... It makes the Stainless P3 feel like a kettle weight.
Love it Love it Love it!!!
Worth the Money? YES!!!
That is all, Jim
congrats Jim ... my Ti mini? ... she is the belle at the Provari Ball.
Good morning everyone. Been a long time since i have been here. But Last week i finally got my new gun metal P3! I love this mod. My first high end mod was the 2.5 and since then i have tried so many other mods. I have used mechs, box, and dna30/40's. I swear the only thing that comes close to the quality of a provari is the SX mini. (my second favorite device) I couldn't care less about clouds, so the "limitations" of the p3 are a mute point for me.
Just wanted to check in and say hi to everyone. Vape on!!
Just wanted to check in and say hi to everyone. Vape on!!
Two things Rod. Make sure you center the coil over the air hole. 2nd., consider your juice. The higher the pg the less power you need to hit the vapor point. If your running 70 pg you run into wick lag on a 2mm ID/2 ohm coil at about 10 watts and it gets worse from there hitting burnt level at 15 watts. Up the ID to 2.5 or 3mm and 15watts is not so bad thanks to more juice in the wick.So tonights adventure with wire. I built three coils. One with 9 wraps. Too high. One with 7 wraps. Too low. One with 8 wraps. Perfect. It came out a tad over 1.5 ohms. I wicked her, primed her, put the KFL+ all back together, filler her up and let her sit for 5 minutes before taking a vape. So far, much much better than last night's adventure with wire. Since I'm a picture guy, here's tonight build:
Sent from my iPad using Tapatalk
That's funny, I was thinking this morning that I like the look of the K4. LOL But I don't see myself spending that much on a top and I'm still afraid it's a bit too complex for me. Still, it is purty!
Astro, I'm so happy for you! I still don't mind and actually kind of appreciate the "kettle weight" P3, but maybe one day a TI will make it into my hands.
Congratulations and please enjoy your P3!
My juice is a 70/30 blend, so this makes sense and I've finally realized on the KFL+ that 9.4 watts produces the perfect blend of flavor and volume. The picture you referred to was a failed build. Last night I finally built a successful coil, which is centered over the hole and is working great. Thanks for taking the time to help. Much appreciated.
- Status
Similar threads
- Locked
