older GG items

[Darkreign]

ODYSSEUS ODYSSEUS ODYSSEUS

I'm sorry to say this but alot of people are deluded, we don't want a thin atomiser but we want the best atomiser EVER and that is Odysseus. We want to enjoy vaping, that's the most important factor for me vaping. If an atomiser doesn't allow my e-liquid to taste good then that's a failure on the atomisers behalf.
I've kept my mouth shut and not said anything bad about iatty, ithaka and Penelope but for me, these don't satisfy me as much as Odysseus. I will sell them all and get at least 3 Odysseus.
Keep ODYSSEUS as it is, as little changes makes a difference but I'm sold on the idea of ggts and 510 base

I'm very disappointed that Imeo will make new Penelope as I've waited a while knowing I can get ODYSSEUS again. Come on all you Odysseus supporters. Make some noise

I can certainly appreciate your passion for your Ody, but I also must point out that there are others that are equally as passionate about their favored Imeo creation. I myself favor the Penny, and would never consider parting with it. Sure, I own the iAtty, Ithaka, and an Ody. But my flavors are best with my Penny.

And in essence, the Ody has received more "Lovin" than most of the others since its on its 3rd incarnation (Ithaka was actually an Ody V3 if my memory serves me correctly) whereas the Penny has had no updates, and myself as well as many others, feel it is long overdue.

 

[steliosss]

My all day atomizer is Ithaka but I always carry my Ody with a different flavor with me.
A single coil Penny in the same size and +1ml capacity, could definitely replace my Ody!!!

 

[qorax]

thanks electra. Please keep in mind that 1 ml is a very big increase of capacity. My vote is for more capacity because 5mm is a serious reduce of length on an atomizer but comparing to 1ml more capacity, its less important.

I'd like a 'reduced' size on the Penelope rather than an ml's increase.
Remember, it's (usually) for 14xxx mods and here size matters - smaller the better
______________________________________
However, if a 'window' could be introduced, then the current length is welcome

 

[Rajuisha]

I can certainly appreciate your passion for your Ody, but I also must point out that there are others that are equally as passionate about their favored Imeo creation. I myself favor the Penny, and would never consider parting with it. Sure, I own the iAtty, Ithaka, and an Ody. But my flavors are best with my Penny.

And in essence, the Ody has received more "Lovin" than most of the others since its on its 3rd incarnation (Ithaka was actually an Ody V3 if my memory serves me correctly) whereas the Penny has had no updates, and myself as well as many others, feel it is long overdue.[/QUOTE

I'm trying to get Imeo to change his mind lol by complaining don't mess it up for me, JUST AGREE WITH ME even though you guys picking a different atomiser, PLEASEEEEE

 

[Darkreign]

I'm trying to get Imeo to change his mind lol by complaining don't mess it up for me, JUST AGREE WITH ME even though you guys picking a different atomiser, PLEASEEEEE

REJOICE RAJ!!!

Post #973
http://www.e-cigarette-forum.com/forum/gg/442942-just-gg-98.html

 

[Rajuisha]

I'm lost for words...... Erm.....anyone can let me borrow £€1000

Thank you Darkreign

 

[Darkreign]

No problem.

 

[Rajuisha]

What a great GG family

 

[jjkanto]

I will take a Penelope, however you decide to make it Imeo.

 

[Frankd85]

I think the ithaka blows the oddy away just my opinion. All I know is I can't wait for my just GG to get here! And can't wait to order the proteus!

 

[occultangle]

Penelope was my first GG item, and I still use it and love it. I would be interested in buying an updated version, probably.

Between an increase in capacity or a decrease in size, it's hard to choose, either would be nice. Connecting the wires like Ithaka is definitely a plus, as is an adjustable center pin. But none of these benefits would be as good, in my opinion, as the ability to not have to use NR wire would be, as a few others have said.

I will probably buy it anyway, but if you could come up with a solution for not using the NR wire I would definitely buy it.

 

[fright88]

Personally while I think the Penelope has the best flavor for me anyways the fact that I have to constantly open and close the juice controll to keep the wicks wet gets annoying. So I would like to see the new Penelope have either a slightly thinner walled mouthpiece where the juice controll part is or have the tank be slightly wider internally at that point. I have had 3 different versions of the clear tank and the stock SS and they all do the same thing. It is good for 3-5 hits then I have to close and re-open the mouthpiece to get juice down past it to the coils. I would prefer to keep the ceramic housing the same size though.

 

[Aal_]

Personally while I think the Penelope has the best flavor for me anyways the fact that I have to constantly open and close the juice controll to keep the wicks wet gets annoying. So I would like to see the new Penelope have either a slightly thinner walled mouthpiece where the juice controll part is or have the tank be slightly wider internally at that point. I have had 3 different versions of the clear tank and the stock SS and they all do the same thing. It is good for 3-5 hits then I have to close and re-open the mouthpiece to get juice down past it to the coils. I would prefer to keep the ceramic housing the same size though.

that's weird fright, i use 100% VG and I don't have this problem. I am using 3mm wick on top and under it 2mm going down the channels.

 

[imeothanasis]

you said almost all the things I did on Penelope fright lol

But I am not responsible for the clear windows, I dont make them, they are third party solution

Personally while I think the Penelope has the best flavor for me anyways the fact that I have to constantly open and close the juice controll to keep the wicks wet gets annoying. So I would like to see the new Penelope have either a slightly thinner walled mouthpiece where the juice controll part is or have the tank be slightly wider internally at that point. I have had 3 different versions of the clear tank and the stock SS and they all do the same thing. It is good for 3-5 hits then I have to close and re-open the mouthpiece to get juice down past it to the coils. I would prefer to keep the ceramic housing the same size though.

 

[yankeebobo]

Personally while I think the Penelope has the best flavor for me anyways the fact that I have to constantly open and close the juice controll to keep the wicks wet gets annoying. So I would like to see the new Penelope have either a slightly thinner walled mouthpiece where the juice controll part is or have the tank be slightly wider internally at that point. I have had 3 different versions of the clear tank and the stock SS and they all do the same thing. It is good for 3-5 hits then I have to close and re-open the mouthpiece to get juice down past it to the coils. I would prefer to keep the ceramic housing the same size though.

I have the same issue with both Penelope Fright. It does get annoying but sadly I've gotten used to it. After 5, if I don't have an off taste I habitually open and close it to make sure. Especially since I have cotton hemp in it. But I see this problem even with silica.

 

[Rene.one]

ok guys, I desided to make Penelope again. It will have:

adjustable center pin
air control
connection for the negative wire like Ithaka
different engravings on it, and

a. I can reduce the total length from 47mm to 42mm that is 0,5cm less
b. I can leave length as it is and increase the capacity from 3ml to 4ml.

Penelope is the smallest thin atomizer in the market including China atomizers and also it has a 3ml capacity. Is its length ok so we can increase the liquid capacity or you want an even smaller atomizer?

a.
because with a 14xxx akku you cant vape so much liquid and when i replace the akku i can refill liquid too.
The Penelope is a small atomizer and when you can make it smaller with the same capacity please do it.
maybe you can make the mouthpiece shorter.

PS. make the slim again

 

[upsetter21]

Imeo, I want to encourage you to make spares for all GG items that have been produced to-date. I think people who already own GG items are already your customers and will buy extras for items they currently own. I certainly enjoy "dressing up" my mods, and would be grateful if some of these "extras" would become more available. Many of us missed items such as the brass AF control ring, and the different AF top-caps. Of course, button constructions, plastics, and springs are always needed to be replaced. I like to believe I can use my GG gear for my entire life, and think you are also a lifer Imeo, so keep us going with parts for existing GG, please. There are some of us that are newer to the GG family and still need the extras too. Personally, I will always seek out any upgrades or accessories to my existing collection. Thanks for your consideration, Imeo.

 

[imeothanasis]

upsett, I will send justGG to my sellers and after this I will start preorders for all GG items. This will be a unique opportunity for all GG users to get everything they want

 

[Skibadabomski]

upsett, I will send justGG to my sellers and after this I will start preorders for all GG items. This will be a unique opportunity for all GG users to get everything they want

Now that is a great idea..

 

[jjkanto]

Good for me!