I am thinking of making something fatter like penelope fix. Achilles is a nice project but its very thin and not for all people. I want to make something that will be easy to be made from all people and still thin
older GG items
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
-
- Tags
- evod kayfun provari revolution
- Status
I am thinking of making something fatter like penelope fix. Achilles is a nice project but its very thin and not for all people. I want to make something that will be easy to be made from all people and still thin
Then my dear Imeo, I hope the Penelope will be with all the advantages you have thinking from a mount.
I will enjoy the Penelope with proteus as a couple and that will be awesome, thanks Imeo.
Cheers
Finally able to set up the iAtty correctly and I must say, it's the best vape I've ever had. We need more votes for the iAtty!!
ok guys, I desided to make Penelope again. It will have:
adjustable center pin
air control
connection for the negative wire like Ithaka
different engravings on it, and
a. I can reduce the total length from 47mm to 42mm that is 0,5cm less
b. I can leave length as it is and increase the capacity from 3ml to 4ml.
Penelope is the smallest thin atomizer in the market including China atomizers and also it has a 3ml capacity. Is its length ok so we can increase the liquid capacity or you want an even smaller atomizer?
adjustable center pin
air control
connection for the negative wire like Ithaka
different engravings on it, and
a. I can reduce the total length from 47mm to 42mm that is 0,5cm less
b. I can leave length as it is and increase the capacity from 3ml to 4ml.
Penelope is the smallest thin atomizer in the market including China atomizers and also it has a 3ml capacity. Is its length ok so we can increase the liquid capacity or you want an even smaller atomizer?
I will buy either way but would vote for same size as now and more capacity. 3-4 ml is good for me.
Yes a new improved Penelope sounds awesome.
Could we have something more tight than a O ring to tighten the negative wire?
If there was another mini screw to hold it in place then loose wires can be tightened before installing the made coil into it's chamber.
Plus O rings can swell or be lost or damaged.
I'd like to see a smaller version of the Penelope because 3ml was always enough for me. Size is vital with thin atomizers. On top of a GGTB it's a tad long.
On a stealth also it's a tad long. With you making thinner mods in the future I think size is important.
Just throwing ideas in..
Could we have something more tight than a O ring to tighten the negative wire?
If there was another mini screw to hold it in place then loose wires can be tightened before installing the made coil into it's chamber.
Plus O rings can swell or be lost or damaged.
I'd like to see a smaller version of the Penelope because 3ml was always enough for me. Size is vital with thin atomizers. On top of a GGTB it's a tad long.
On a stealth also it's a tad long. With you making thinner mods in the future I think size is important.
Just throwing ideas in..
Last edited:
thanks electra. Please keep in mind that 1 ml is a very big increase of capacity. My vote is for more capacity because 5mm is a serious reduce of length on an atomizer but comparing to 1ml more capacity, its less important.
to my opinion, o-ring is the best for our job Skiba. Look at this way:
1. Oring reduce the length
2. a screw will get unscrewed by the o-ring under it and we will have Ody's problems
3. You can still lose the screw like you can do with o-ring. But o-ring is very cheap and also you can buy it from everywhere without waiting for me to make spares
1. Oring reduce the length
2. a screw will get unscrewed by the o-ring under it and we will have Ody's problems
3. You can still lose the screw like you can do with o-ring. But o-ring is very cheap and also you can buy it from everywhere without waiting for me to make spares
If by chance the Penelope 2.0 will support dual coils then more capacity is a must. I run though the tank on my Ithaka in about 8 hours now that I am using duals. 
to my opinion, o-ring is the best for our job Skiba. Look at this way:
1. Oring reduce the length
2. a screw will get unscrewed by the o-ring under it and we will have Ody's problems
3. You can still lose the screw like you can do with o-ring. But o-ring is very cheap and also you can buy it from everywhere without waiting for me to make spares
Agreed.
lol, I am glad skiba
Also the o-ring is pushing harder the wire under the center post than we do with a bolt
Also the o-ring is pushing harder the wire under the center post than we do with a bolt
I am thinking to make it single coil Matt. I want to keep it as simple as I can for the users and at the same time a full effective atomizer with features that others still dont have.
If by chance the Penelope 2.0 will support dual coils then more capacity is a must. I run though the tank on my Ithaka in about 8 hours now that I am using duals.
We need 2 more threads for a window, so in a thin atomizer a window will reduce dramatically the capacity aal. Also we will have again the problems with some kind of liquids. I dont see a reason for trouble when Penelope with its liquid control gives you the ability to know when the liquid is finished.
ODYSSEUS ODYSSEUS ODYSSEUS
I'm sorry to say this but alot of people are deluded, we don't want a thin atomiser but we want the best atomiser EVER and that is Odysseus. We want to enjoy vaping, that's the most important factor for me vaping. If an atomiser doesn't allow my e-liquid to taste good then that's a failure on the atomisers behalf.
I've kept my mouth shut and not said anything bad about iatty, ithaka and Penelope but for me, these don't satisfy me as much as Odysseus. I will sell them all and get at least 3 Odysseus.
Keep ODYSSEUS as it is, as little changes makes a difference but I'm sold on the idea of ggts and 510 base
I'm very disappointed that Imeo will make new Penelope as I've waited a while knowing I can get ODYSSEUS again. Come on all you Odysseus supporters. Make some noise
I'm sorry to say this but alot of people are deluded, we don't want a thin atomiser but we want the best atomiser EVER and that is Odysseus. We want to enjoy vaping, that's the most important factor for me vaping. If an atomiser doesn't allow my e-liquid to taste good then that's a failure on the atomisers behalf.
I've kept my mouth shut and not said anything bad about iatty, ithaka and Penelope but for me, these don't satisfy me as much as Odysseus. I will sell them all and get at least 3 Odysseus.
Keep ODYSSEUS as it is, as little changes makes a difference but I'm sold on the idea of ggts and 510 base
I'm very disappointed that Imeo will make new Penelope as I've waited a while knowing I can get ODYSSEUS again. Come on all you Odysseus supporters. Make some noise
- Status
