Penelope official and tips and tricks

[Fanky]

Imeo Im using Penelope with my stealth and am experiencing an airy draw. How exactly do you adjust Penelope's moving pole?

sure Mrgig, thats the trick. The Penelope's moving pole is the best way to adjust the air on other than GG series devices.

 

[imeothanasis]

if you screw the ceramic housing more then center pole will come out of the 510 threads more fanky. If you screw it less then it will stay inside the 510 threads. But in Stealth you cant do many things about air, exept you put an o-ring around 510 threads of the penelope to cover the 2 holes that penelope has to breath

 

[Fanky]

Thanks Imeo, I ordered the GGTS connector for oddy so hopefully that will work. Penelope will breath better once she has Proteus.

 

[imeothanasis]

yes, proteus has adjustable air funky

 

[RiverNut]

I'm on day 4 with my Penelope and I've been getting a burnt taste on every hit now. Was doing fine the first 3 days and I even refilled it twice... Liquid control is open about 2 turns. Do I need to replace the wick already? I noticed it looked pretty black around the coils last time I opened it up.

You can clean them easily! Take out the rebuildable part and run hot water over the wick and coil. Pat the wick to get excess moisture out then install back in the base. Fire your battery until the moisture is vaporized and at the same time blow on the coil. This will give you damn near a new coil. Do this about every 6 ml of usage until the wick starts to fall apart. Then it's time for a new coil.

 

[imeothanasis]

2nd post is updated

 

[Jagellpuff]

Thanks Imeo, love the Pene! Watched and followed you vids and it vaped perfect first try! Simple! this was my first rebuildable.




Jeff "Jagellpuff" via iPhone using Tapatalk

 

[imeothanasis]

I am very glad about this Jagg.

 

[hexdrin]

Absolutely adore my Penelope. It is possibly the best silica wick atty that I have ever used (the best atty I've ever used? Maybe, I'll have to wait and see) - I've not used any of my genesis atomizers since receiving the Penelope...!

Just waiting to attach it to a Proteus.. not long now I hope.

A masterful piece of engineering - thanks Imeo!

 

[imeothanasis]

I am more than glad that you like Penelope hex. !

 

[danks]

You can clean them easily! Take out the rebuildable part and run hot water over the wick and coil. Pat the wick to get excess moisture out then install back in the base. Fire your battery until the moisture is vaporized and at the same time blow on the coil. This will give you damn near a new coil. Do this about every 6 ml of usage until the wick starts to fall apart. Then it's time for a new coil.

I tried this yesterday and it worked pretty well! I need to fix my coil and wick setup though because I get that burning taste on the 2nd refill and it just doesnt go away. I think I'm wrapping the coil too tight and its not wicking well, especially true when I'm using juices with high VG content. Also going to try and go with two pieces of wick on my next build.

 

[RiverNut]

Oh...if your not using at least 2 wicks, you're missing out! I'm running a 1.8 triple wick and it's awesome. And yes there is a fine line with how tight you wrap your coil.

 

[imeothanasis]

second post is updated with a video

 

[R53_Dave]

After over a week with the Ody V2, and the Penelope, I'm giving the trophy to the Penelope! Just unreal how well it works. While the Ody is bit fussy, floods if I don't pamper it, and tends to have an airy hit, the Penelope will just blow the back of your throat out if you let it. It doesn't matter what ohm coil, or what flavor/type of liquid. It puts out every time. No issues what so ever. No floods, No dry hits. NADA! I'm using 3 of them with different juices and they all are working the same....perfectly! I'll be buying 3 more asap.

Can't wait for the Proteus seeing how well these do on a ProVari.

 

[imeothanasis]

exellent post D3, thanks buddy!

 

[Beco]

Imeo will you make ggts base for Penelope?
That would be great

 

[imeothanasis]

maybe you will change your mind when you will see proteus, so lets wait first beco

 

[Beco]

I'm sure Proteus will kick ... but for all GGTS users it would be great to have Penelope ggts base and possibility to use air control and not to mess with china conectors if you want to put Penelope on GGTS

 

[imeothanasis]

i dont disagree beco. I always make things that you ask for and I will make those bases but just a little later

 

[Beco]

Imeo-I have one black stain on my Penelope, on the base.
It doesn't come off with just a microfibre cloth rubbing.
With what polish can I try to remove it or should I just ask seller for the new base