Penelope V3
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
wesweswes,
you needed GGTS Connector 801 - 510 for use the Penelope on the GGTS
another way - GGTS connector replace with GG Stealth Connector
you needed GGTS Connector 801 - 510 for use the Penelope on the GGTS
another way - GGTS connector replace with GG Stealth Connector
Last edited:
Hi All,
just got myself a Penelope V3 and i have a SS GGTS. Im really impressed with how easy it is and the vape is excellent.
My question is - will there be a PV3 native connector for the GGTS?
If not can you tell me thread guages so i can get a a machinist to make me one.
many thanks
Lovin the GG
This would be better and is fully compatible with GGTS.
Just GG Lid
I like the GGTS connection better for Penelope v3 than the Stealth connector. Maybe I was doing something wrong, but on the Stealth cap when I screwed Penny v3 in the center post also screws in, and when you tighten it sometimes the post doesn't make contact with the Stealth pin because the Penny center post screws in too far to make contact (not sure how that happens, though!).
It fits nice and tight on the GGTS cap, though! I love it!
I have an Ody dripper coming in the mail today to turn Penny v3 into a dripper, very excited for that!
All I need now is another SS rethreader ring.. I have a brass one but I like SS better!
It fits nice and tight on the GGTS cap, though! I love it!
I have an Ody dripper coming in the mail today to turn Penny v3 into a dripper, very excited for that!
All I need now is another SS rethreader ring.. I have a brass one but I like SS better!
Received one of two packages from Vassilis, which contained a Penelope V3. Now she's taking a ultra sonic bath...
It worked for me, just not when I screwed it tight.. I almost wonder if a longer screw center pin for Penny would help? Anyway don't take my word for it, you guys try and let me know - it could just be something I am doing.
i have the gg 510 extender to run it with the collctor tank installed, but i always prefer a native base. If it flared out slightly to screw in to the lid threads that would be the icing on the cake..
Sorry FogNL, I've just been rocking cotton + microcoils on my Penny v3 - I love it! Can't wait for my Ody drip cap to use with it!!
Just got my Penny V3 in the mail, few things:
Is it possible to adjust the air flow while assembled (If so, How?)
The center post screw seems to wiggle back up on me, what am I doing wrong, or is there something I can do to stabilize that? Or is there a way to lower the post without loosening the screw?
Wicked with 2mm silica atm, I have 3mm as well, but it didn't seem to want to wick as well, maybe I just built it wrong?
I usually wrap my coils around 1.5-2ohms, which is 4/5 on a single wick or 3/4 on a double wick...I've tried both of them, and with the liquid control open to about 4 full turns, I'm getting dry hits.
Using a ProVari V2.5.
I use NiChrome 32g and Silica wick. Not really interested in changing either, I don't like the flavor of Kanthal and I'm happy with Silica.
Is it possible to adjust the air flow while assembled (If so, How?)
The center post screw seems to wiggle back up on me, what am I doing wrong, or is there something I can do to stabilize that? Or is there a way to lower the post without loosening the screw?
Wicked with 2mm silica atm, I have 3mm as well, but it didn't seem to want to wick as well, maybe I just built it wrong?
I usually wrap my coils around 1.5-2ohms, which is 4/5 on a single wick or 3/4 on a double wick...I've tried both of them, and with the liquid control open to about 4 full turns, I'm getting dry hits.
Using a ProVari V2.5.
I use NiChrome 32g and Silica wick. Not really interested in changing either, I don't like the flavor of Kanthal and I'm happy with Silica.
Last edited:
my V3 is on it's way!!!
this is my first Penelope and i know it's a bit different from the v1 and v2. could someone do a video build of the V3??? that would be awesome.
this is my first Penelope and i know it's a bit different from the v1 and v2. could someone do a video build of the V3??? that would be awesome.
Received mine today and took it apart to give it a good clean (lots of iron filings). Just hope I can put it back together again. Video or exploded view diagram would also be great. Might also answer some of Xaivers' questions and mine.
Yaya this is the video Imeo made to show how to assemble the new rebuildable part of the Ithaka upgrade. It is EXACTLY the same even in size to the new Penelope V3. So just follow this video and you'll put it together again
Penelope V3: She came, I cleaned, build, vaped and fell in love! Kudos to the creator! 
Same here , Penny V3 .... Vapes great and feels, 
looks like a precious jewel ! Thanks Imeo and Vassillis !
looks like a precious jewel ! Thanks Imeo and Vassillis !- Status
