Please Manufacture A Lightweight Low Profile Squonker.
- Thread starter niczgreat
- Start date
- th_trl_thread_readers 0
-
- Tags
- lightweight profile squonker
- Status
This is my take on a small portable Squonking outfit - it's a Mark 1 Pico Squeeze topped with an Origen Little attie. The photo shows it beside a Pico with a nautilus Mini to give a size comparison.
I don't know if you can still get original Origens as I got mine a few years ago ( and they were never cheap ) but I see I for 1 clones being offered by reputable UK Dealers online.
Though small, the deck is easy enough to build on, doesn't leak and the attie can produce clouds if that is your thing - even with a single
I ohm spaced coil such as I am using.
I don't know if you can still get original Origens as I got mine a few years ago ( and they were never cheap ) but I see I for 1 clones being offered by reputable UK Dealers online.
Though small, the deck is easy enough to build on, doesn't leak and the attie can produce clouds if that is your thing - even with a single
I ohm spaced coil such as I am using.
Big fan of the O-Little. I had a few authentics and sold them after I picked up...gasp...five clones. I am currently using two of them on my REO Grands. Single kanthal micro coil at .4-ohms between the posts works very well for me and gives me great flavor and a surprising amount of vapor.
I saw that and kind of wished that the holes were open rather than blind. No big deal though, I'll just cut and test till I find the right length.
Also a big fan of the OL16. I have one Original and 2 one-to-one clones (Bought because I cannot find the originals anymore) It is a great little Addy
This is a fantastic little squonker and really light, easy to take apart and comes with a spare bottle and spare contacts for switch.
I want one. It's made with resin and aluminium
I want one. It's made with resin and aluminium
Yes I love Todd's reviews too - a West of Scotland man in his shed - love his style; as we'd say -"Pure dead brilliant!"
On the Coral 2?
The one's I have the post holes are open, but not much room to trim the leads.
They really should be closed to prevent shorting with the deck.
On the Coral 2?
The one's I have the post holes are open, but not much room to trim the leads.
They really should be closed to prevent shorting with the deck.
Gotcha. I thought the holes were closed/blind. Apparently that would be better.
Hard to beat the Pico Squeeze OG for a TINY little squonk setup. The only thing I have that's smaller is the VV Simple EX.
I like the Pico Squeeze OG for MTL with either an Ammit or Geekvape ETNA RDA. Either RDA gets a simple 28 or 30g kanthal build running between 1.6 to 2 ohms. I can easily vape all day on a single LG HG2 and bottle of juice with this setup. Great for out and about, or yard work days.
This is a fantastic little squonker and really light, easy to take apart and comes with a spare bottle and spare contacts for switch.
View attachment 797871
I want one. It's made with resin and aluminium
I liked it until I watched Todd's review and he mentioned that it is best suited for a right-hander. Being sinistral - I'm out.
I don't usually worry about the fire button placement, like everything else - I adapt, but he made a point of it, so...
I liked it until I watched Todd's review and he mentioned that it is best suited for a right-hander. Being sinistral - I'm out.
Actually that's the one part of the review I disagreed with...ok the rda will be the end nearest to you but heey
Actually that's the one part of the review I disagreed with...ok the rda will be the end nearest to you but heey
Really, I'm just using it as an excuse NOT to buy another mod that I don't need.
Got my dazzling Squeeze 2 yesterday and it came with the Coral RDA and battery from Breazy for 27 bucks - though I did also get a SMOK Nord and a bottle of juice to get free shipping.
Anyway, it's pretty great for the money and I actually like the Coral.
I know it's not suited for the OP as it weighs a ton, but nice kit for $27.
Anyway, it's pretty great for the money and I actually like the Coral.
I know it's not suited for the OP as it weighs a ton, but nice kit for $27.
I've been using the Squeeze 2 bought from Breezy and so far it's been a very good Squonker.Got my dazzling Squeeze 2 yesterday and it came with the Coral RDA and battery from Breazy for 27 bucks - though I did also get a SMOK Nord and a bottle of juice to get free shipping.
Anyway, it's pretty great for the money and I actually like the Coral.
I know it's not suited for the OP as it weighs a ton, but nice kit for $27.
I just wish that it was much lighter in weight.
Well I'm not having much luck.
At 2 months my Squeeze 2 electronics went wonky, decided to get stuck at 1.5 Watts. It won't let me change the Watts.
The Dovpo Topsider which I've handled gingerly had the bottom hinge break at 30 Days, we'll see if Element Vape will honor a warranty.
For a backup I just bought the Vandy Pulse X 90 wish me luck. I hope it lasts I hate throwing good money after bad.
At 2 months my Squeeze 2 electronics went wonky, decided to get stuck at 1.5 Watts. It won't let me change the Watts.
The Dovpo Topsider which I've handled gingerly had the bottom hinge break at 30 Days, we'll see if Element Vape will honor a warranty.
For a backup I just bought the Vandy Pulse X 90 wish me luck. I hope it lasts I hate throwing good money after bad.
Sorry to hear your having some bad luck @tomzgreat, hopefully you've got it out of the way now though and things will take a turn for the better.
Luck is bad, Element Vape denies the warranty because it's past 30 days. Yeah 33 days.
I wrote directly to Dovpo we'll see how it goes.
Last time I buy from Element. I could understand if I was two weeks past the date but 3 days past the date is shabby.
I wrote directly to Dovpo we'll see how it goes.
Last time I buy from Element. I could understand if I was two weeks past the date but 3 days past the date is shabby.
- Status
Similar threads
