Not particularly. I have some V1 CAP Lemon Meringue Pie but that will do me. I put jut a tad of juicy lemon in that. along with custard and whipped cream. It is ok but no ADV fer sure.
Power Puffers
- Thread starter Boden
- Start date
- th_trl_thread_readers 0
- Status
it does taste like lemon meringue now that you mention it.
I added some CAP sweet cream to see if I could save it. Went from lemon custard to lemon meringue.
I mixed up the chocolate at 8mg 50/50 and fogged up a room with five puffs. Had to re-drip after four puffs. Power Puffing requires dripping often it seems.
Dual parallel 30 gauge, 3mm ID, 12:11 wrap, came out to 0.9 ohms running at 37W.
Dual parallel 30 gauge, 3mm ID, 12:11 wrap, came out to 0.9 ohms running at 37W.
Last edited:
You build some great looking coils.
I dunno I do not have a squonker. I just came up with the idea but someone will make it.
It is logical as Spock would say.
Last edited:
Meow this is a tasty build.
I shall call it "Pig Nose"
It's two 20wrap, 28 gauge, 3mm ID, coils folded in half. Came out to 2.0 ohms. Nice at 30W. Very tasty
I shall call it "Pig Nose"
It's two 20wrap, 28 gauge, 3mm ID, coils folded in half. Came out to 2.0 ohms. Nice at 30W. Very tasty
Meow this is a tasty build. View attachment 508700View attachment 508701View attachment 508702
I shall call it "Pig Nose"
It's two 20wrap, 28 gauge, 3mm ID, coils folded in half. Came out to 2.0 ohms. Nice at 30W. Very tasty
I would have thought ramp up time @ 30w would take ages on that build, but what do I know with my single lightweight coils
Damn. Infinity surrounded by cloud. I do like pig nose too.
Pig Nose V2 out now
I changed it to parallel wraped 28 gauge, 12 wrap, 2.5mm ID. Got the resistance down to 0.6. At 40W very tasty.
Holds a lot of juice
I changed it to parallel wraped 28 gauge, 12 wrap, 2.5mm ID. Got the resistance down to 0.6. At 40W very tasty.
Holds a lot of juice
It's 28 gauge. Takes about a second to get going good. Which is perfect for me. I like long drags (6-8sec)I would have thought ramp up time @ 30w would take ages on that build, but what do I know with my single lightweight coils
ON the ramp up time. Would it be nice if mods offered a fast ramp up in Watts mode? Say if you vape at 40 and set the fast ramp option it would give you say 20% more watts for 1/2 second or so?
Seems like it would work nicely for coils with more mass.
Seems like it would work nicely for coils with more mass.
Some mods have a boost setting that does just that.
Next time I make this coil I'll use 30 gauge
Try it with N80. Lower resistance, faster ramp up, faster cool down, less watts. You can get the same resistance with wire 2 gauges smaller vs KA1 and it takes less power to fire it.
- Status
Similar threads
- Locked
