Precise ELA Telescoping Mod by Super-T!
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
actually just looked up the straus thread 
okay guys for as topper for the ELA.... Stratus 22 or DocDave's Steam Turbine?? whatcha think between those 2
okay guys for as topper for the ELA.... Stratus 22 or DocDave's Steam Turbine?? whatcha think between those 2
I'm not into the leaky leak Genesis style atomizers
Even moreso if it's going to be on a bottom fire device.
Unless you want to leave the ELA standing and locked 24/7 then I'd steer clear of them..
My .02
Even moreso if it's going to be on a bottom fire device.
Unless you want to leave the ELA standing and locked 24/7 then I'd steer clear of them..
My .02
Last edited:
+1.
I'm running a micro+cotton in my KFL as well and it's beastin! 30g kanthal micro at 1.5 ohm and some sterile 100% cotton from CVS - been rockin this coil for a week now and the performance is still great. I'll probably switch out the cotton tomorrow before I refill the tank but the coil is still good to go.
I had to edit my post.
After further research, the stratus is not a genesis atty. it's actually a one of a kind. Made me quite excited and I'm starting to look forward for this. Good thing I read that thread. I almost posted up mine of my ela's in the classies. My bad for jumping the gun.
After further research, the stratus is not a genesis atty. it's actually a one of a kind. Made me quite excited and I'm starting to look forward for this. Good thing I read that thread. I almost posted up mine of my ela's in the classies. My bad for jumping the gun.
Last edited:
The ELA has arrived in Australia (not many here i would imagine). Probably another 2 days for delivery though but who knows it could arrive at my door tomorrow.
I hope Australia's customs office processes mail quicker than the U.S. We usually have to endure at least 3 or 4 days, and more often over a week, of packages stuck in New York with no movement. But when your ELA finally arrives, you'll be happy as a pig in poop.
On an unrelated note, I'd like to chime in on the figure 8 wick / use a pin / don't use a pin RBA discussion. If you use 34 gauge Kanthal you can get away with fewer wraps; and 34 gauge is so much more pliable than thicker gauges that it's an absolute breeze to wrap around your wick with no tools.
This 2-over-3 coil is about 1.8 ohms.
It heats up instantly.
The single wick wicks quickly enough for me. Occasionally when I chain vape or when I'm on a 4.2v full charge I'll have to do a sharp unpowered draw to flood it a little more. But the taste is consistently rich. Higher resistance = lower amperage and longer battery life. Conserving wick and wire means having to re-order less frequently. And most importantly, the coil / wick seems to last longer without needing cleaned or replaced than when I double up the wick or use 32 or 30 gauge Kanthal.
On an unrelated note, I'd like to chime in on the figure 8 wick / use a pin / don't use a pin RBA discussion. If you use 34 gauge Kanthal you can get away with fewer wraps; and 34 gauge is so much more pliable than thicker gauges that it's an absolute breeze to wrap around your wick with no tools.
This 2-over-3 coil is about 1.8 ohms.
It heats up instantly.
The single wick wicks quickly enough for me. Occasionally when I chain vape or when I'm on a 4.2v full charge I'll have to do a sharp unpowered draw to flood it a little more. But the taste is consistently rich. Higher resistance = lower amperage and longer battery life. Conserving wick and wire means having to re-order less frequently. And most importantly, the coil / wick seems to last longer without needing cleaned or replaced than when I double up the wick or use 32 or 30 gauge Kanthal.
Last edited:
ELA looks great with an IBTanked cartotank, but I need to find some decent 1.5 ohm cartos, 2 ohm ones doesn't cut it.
Yup! I love my Diver so much I picked up a 2nd one the other day and a Grail to drip, drip, drip!
I have a Diver and hate the Damn thing lol. I need to get a bunch of new ceramics for it, they keep breaking, and that flange.....
Phiniac sells the replacement cups and the flange doesn't bother me at all...
http://phiniac.com/pid-2385/ceramic.html
I *think* Smok Tech sells a 1.5ohm dual coil cartomizer..
I tried them once and didn't really like them..
http://phiniac.com/pid-2385/ceramic.html
I *think* Smok Tech sells a 1.5ohm dual coil cartomizer..
I tried them once and didn't really like them..
Last edited:
Yeah, I'll get the Diver sorted one day, I need to grind off the annoying flange and set it up properly again.
In stock but you better be fast!
Atomizer ohm meter
http://www.madvapes.com/cartomizer-and-atomizer-ohm-meter.html?___SID=U
Edit: And just like that all 50 are gone in 3 minutes flat!
If you were looking for it, I hope you scored one!
Atomizer ohm meter
http://www.madvapes.com/cartomizer-and-atomizer-ohm-meter.html?___SID=U
Edit: And just like that all 50 are gone in 3 minutes flat!
If you were looking for it, I hope you scored one!
Last edited:
ELA looks great with an IBTanked cartotank, but I need to find some decent 1.5 ohm cartos, 2 ohm ones doesn't cut it.
Awesome! Would look really cool with red anodized accent rings.
They do, but on an unregulated 3.7v mod I'd recommend the dual coil 1.25ohm.
Although I personally can't stand cartos
They do, but on an unregulated 3.7v mod I'd recommend the dual coil 1.25ohm.
Although I personally can't stand cartos
I run the Boge 2ohm carto's and they are fine with my 3.7v PV but when I build the Diver I set it up around 1.4-1.7'ish.. I tried lower ohm builds but it really was not my cup of tea..
No it's fine with the tank, but I get a freaking monstrous GAP between tank and mod, which is not acceptable with my Gapitis...
- Status
Similar threads
