Precise ELA Telescoping Mod by Super-T!

[anavidfan]

I have been playing non-stop with it. Trying out all the configurations. Im going to have to set up my resistance a little lower so I can try it out without the Kick. I have my resistance set at 2.2. Id like to do one at 1.7 and see how it hits. It is vaping so much stronger than my Saber Touch, which is a good PV, but this is better. You have to make sure that when you screw the knurled lock ring that its down as far as you can and tight so you get no battery rattle and then you know all is perfect. You also have to make sure the button ring is also tight for best conductivity.

Top cap for RBAs is great too, but with devices that have their intake at the 510 connection , you have to make sure you don't flush it down completely tight or you get air flow constricted a bit. If you leave a micro gap, its better. For you Genesis users it will make you happy. The micro gap is barely visible unless you hold it up in front of a TV screen and really try to see it.

THere is a tiny built in ledge so that those with Odys or other 510 intakes will get the good airflow. I like an airier draw so I leave it a hair bigger.

 

[snork]

I have been playing non-stop with it. Trying out all the configurations. Im going to have to set up my resistance a little lower so I can try it out without the Kick. I have my resistance set at 2.2. Id like to do one at 1.7 and see how it hits. It is vaping so much stronger than my Saber Touch, which is a good PV, but this is better. You have to make sure that when you screw the knurled lock ring that its down as far as you can and tight so you get no battery rattle and then you know all is perfect. You also have to make sure the button ring is also tight for best conductivity.

Top cap for RBAs is great too, but with devices that have their intake at the 510 connection , you have to make sure you don't flush it down completely tight or you get air flow constricted a bit. If you leave a micro gap, its better. For you Genesis users it will make you happy. The micro gap is barely visible unless you hold it up in front of a TV screen and really try to see it.

THere is a tiny built in ledge so that those with Odys or other 510 intakes will get the good airflow. I like an airier draw so I leave it a hair bigger.

Is it possible to use the adjustable draw cap with an Odysseus?

 

[daveinleics]

At last you got your ELA anavidfan
Good to hear you are enjoying it - great pictures too!
By the time I get mine in the 2nd batch, we'll all be bored with looking at pictures of them

 

[~{InFaIvIoUs}~]

Still waiting on mine...this guy is killin me.

 

[anavidfan]

I tried to , but like David said, it is too deep, unless you are able to get a good 510 to 510 adapter, hmmm, I sold all my adapters, maybe if someone has thiers and an adapter they can try to see if it works.

 

[snork]

Sorry, I must have missed that.

 

[anavidfan]

Does anyone make 510 to 510 adapters in stainless steel?
Also, does anyone know who has the best price on the Kick? The Saber Im giving away needs one and I want to get another.

 

[t8kiteasy]

Does anyone make 510 to 510 adapters in stainless steel?
Also, does anyone know who has the best price on the Kick? The Saber Im giving away needs one and I want to get another.

Sorry about that,i sent you a p.m,i forgot this was supert thread.Did not mean to post another vendor on here.

 

[snork]

But...but...
You can buy a Kick at Super-T too
But...but...
The Crown is an outstanding alternative (and is out of stock at the moment). Check out the Crown thread for hijinx and conclusions.

 

[Cjax]

@ana, fluidvaper has super short adapters. I picked one up to try to make that airflow cap work. I'm pretty sure by using the adapter and an o-ring under the base of my a7 or terminator i can get it to work, unless there is a hight issue with the parts I'm working with. I'll find out hopefully very soon and let you know.

 

[kscoggins]

@ana, fluidvaper has super short adapters. I picked one up to try to make that airflow cap work. I'm pretty sure by using the adapter and an o-ring under the base of my a7 or terminator i can get it to work, unless there is a hight issue with the parts I'm working with. I'll find out hopefully very soon and let you know.

Does that adapter fit inside the hole of the adjustable draw cap? None of mine fit.

 

[fordski]

Does that adapter fit inside the hole of the adjustable draw cap? None of mine fit.

Now there's an advantage of being late to the party (15126). We get to learn from all your experimenting and tips and tricks when we get our ELAs. Thanks all!

 

[anavidfan]

But...but...
You can buy a Kick at Super-T too
But...but...
The Crown is an outstanding alternative (and is out of stock at the moment). Check out the Crown thread for hijinx and conclusions.

DOH, thats where I got my KICK

Now I remember, looked at super -t but they dont have the kick by itself, only with the kicklet combo

 

[snork]

Yeah, it's there, but buried.
Super T ~ Evolv
Should you choose to buy at Super-T.

 

[Cjax]

Does that adapter fit inside the hole of the adjustable draw cap? None of mine fit.

Well i can't say for sure yet, but it doesn't look to be bigger then a regular 510 atty. If it is, though, I'll just put it in a drill press and sand down the outer diameter till it fits. I'm pretty determined to make it work somehow.

 

[anavidfan]

I was hoping the adjustable flow cap would work for RBTA, plus it just looks so cool. Let us know if you end up being able to make it work.

BTW, I dont think I will give the Crown a try, I dont like the literal beeps and whistles. It would drive me nuts.

 

[OnTheFidele]

Hey ana, I felt the same way, but apparently the Crown has a very low key "quiet mode". If it is quiet enough, I'm sold to its advantages, especially that of size and toughness.

BTW, I dont think I will give the Crown a try, I dont like the literal beeps and whistles. It would drive me nuts.

 

[anavidfan]

Thats good to know, what is the difference in size and toughness? I will have to look into it. I saw the instructional video and the little noises sort of turned me off.

 

[anavidfan]

Got a question, was playing around and tinkering, and my Ody leaked some juice down into the connection. I was attaching and detaching it and unscrewed the tank and yikes juice all over.

I wiped it off with soft tissue and q tips and blew it out with my handy data vac, can I take it and rinse it out and then dry it out with my data vac? Im assuming yes, but want to make sure.

 

[Nicblazer]

Got a question, was playing around and tinkering, and my Ody leaked some juice down into the connection. I was attaching and detaching it and unscrewed the tank and yikes juice all over.

I wiped it off with soft tissue and q tips and blew it out with my handy data vac, can I take it and rinse it out and then dry it out with my data vac? Im assuming yes, but want to make sure.

Yes you can, Ana. No problems at all.


Nic