Precise ELA Telescoping Mod by Super-T!

Status
Not open for further replies.

Nicblazer

Super Member
ECF Veteran
Verified Member
Aug 28, 2011
839
1,216
Indiana
Well i can't say for sure yet, but it doesn't look to be bigger then a regular 510 atty. If it is, though, I'll just put it in a drill press and sand down the outer diameter till it fits. I'm pretty determined to make it work somehow.

Adapters do fit, CJ. Here's the problem though :

uge8y8e2.jpg



That's with the cap completely open. Barely, and I mean barely, touching the bottom o-ring seal. As you close, it exposes that 510 adapter even more. You could try dremel, at least, half of the 510 adaptor, which in turn might leave you with lesser threads for the rba. As your turn your rba for whatever reason, you might lose the connection with the adaptor.


Nic
 

anavidfan

ECF Guru
ECF Veteran
Verified Member
Jun 14, 2012
10,216
20,329
U.S.
Yes you can, Ana. No problems at all.


Nic

Thats what I figured, I want to keep my ELA looking pristine as long as I can. It will be my one and only for a while. Down the road I might get something else, but Im keeping my black Saber as soon as it gets back from "the clinic" Since its going in Im having the top cap redone so it has the recessed connection and well. I will have to be more careful with the attaching of the Ody.

Im hoping that the Super-T reputation of being real tough hold true. Im not going to baby this girl
 

anavidfan

ECF Guru
ECF Veteran
Verified Member
Jun 14, 2012
10,216
20,329
U.S.
LOve that Vap, I love Joy Division. I miss those good ol midi tunes.

BTW, just washed my ELA top section in warm water, rinsed, repeat , wiped off with a towel and blew it off with my Data Vac. I love how it is so detailed. You have the top cover, the top cap unit that comes apart in 2 other sections. Threads are perfection.
 

Mindtroverted

Super Member
ECF Veteran
Verified Member
Jul 23, 2012
329
286
38
Zagreb, Croatia
By adding another electrical junction you lose some of the benefits of the super-t design whose purpose it is to minimize electrical loss. If you're so hung up on RBAs that you don't want to be forced to use regular atomizers but you still want the benefits of the adjustable draw cap, you always have the choice of ordering a Diver of waiting on Imeo's Achilles, both of which are rebuildable atomizers the size of regular 510 atomizers so you'd be able to just slide the draw cap over them. Just my :2c:

P.S. Or you can wait for Super-T's atty which will have an adjustable draw mechanic incorporated into it
 

Cjax

Ultra Member
ECF Veteran
Verified Member
Sep 12, 2012
1,750
1,211
RVa USA
Adapters do fit, CJ. Here's the problem though :

uge8y8e2.jpg



That's with the cap completely open. Barely, and I mean barely, touching the bottom o-ring seal. As you close, it exposes that 510 adapter even more. You could try dremel, at least, half of the 510 adaptor, which in turn might leave you with lesser threads for the RBA. As your turn your RBA for whatever reason, you might lose the connection with the adaptor.


Nic

See, that's what i was afraid of. And honestly it didn't occur to me until i was writing my last post, that with an adapter, the cap would have to stay in the full open position or else the adapter would be exposed. Ah, well. I been wanting to revisit 306 atties and now i have a good reason to pick up a couple. Thanx Nic. That's ok though. As soon as she arrives, 1 of my a7's is getting a brushed finish to match the polish on the ELA, and all my worries will be forgotten as I'm mesmerized by the site of my new beauty. It's gonna be a long week!
 

Cjax

Ultra Member
ECF Veteran
Verified Member
Sep 12, 2012
1,750
1,211
RVa USA
By adding another electrical junction you lose some of the benefits of the super-t design whose purpose it is to minimize electrical loss. If you're so hung up on RBAs that you don't want to be forced to use regular atomizers but you still want the benefits of the adjustable draw cap, you always have the choice of ordering a Diver of waiting on Imeo's Achilles, both of which are rebuildable atomizers the size of regular 510 atomizers so you'd be able to just slide the draw cap over them. Just my :2c:

P.S. Or you can wait for Super-T's atty which will have an adjustable draw mechanic incorporated into it

Well who of us ISN'T waiting for a hybrid rba! that and the DNA and i don't think I'd ever NEED another tube mod again! (I said need, not "want" or "get") I just hope the design will allow you to use both together. I know in the past, David has said the mod would be incredibly long by doing so, but i don't care, it's about function and vapor quality with a setup like that! Plus, I don't mind a long pv. Right now all I have is my Vamo, which is a tall drink of water in 650 mode, but I prefer it over 350 mode because of how it feels in my hand, though now saying it out loud I realize it may have more to do with button placement with that one.
 
Last edited:

wongster360

Super Member
ECF Veteran
Verified Member
Mar 11, 2011
879
1,965
Washington
LOve that Vap, I love Joy Division. I miss those good ol midi tunes.

BTW, just washed my ELA top section in warm water, rinsed, repeat , wiped off with a towel and blew it off with my Data Vac. I love how it is so detailed. You have the top cover, the top cap unit that comes apart in 2 other sections. Threads are perfection.

There's nothing better than a well machined mod where the threads are like butter!


Sent from my iPhone using Tapatalk 2
 

anavidfan

ECF Guru
ECF Veteran
Verified Member
Jun 14, 2012
10,216
20,329
U.S.
Has the ELA been released yet? I really want one of these mods. Do I just purchase one from the website? and they are released in batchs?

Hurry, because last we heard there were 20 left and after that the price will be different and many of the special features that come with it, will be extras and it will be a long time till another round is available. Supposedly it will be an item on their menu , just like the Precise Plus PVs.
 

anavidfan

ECF Guru
ECF Veteran
Verified Member
Jun 14, 2012
10,216
20,329
U.S.
Im just really liking it and I cant stop looking at it and vaping. Im sorry for all the "gushing" guess not having ever had such a device, im in awe. I hope that in the future David offers spare parts, because I really think I need the top cap cover ring in satin to match the bottom ring. I decided my favourite "look" is using the satin bottom ring and polished top ring.

myela007.jpg
 

wongster360

Super Member
ECF Veteran
Verified Member
Mar 11, 2011
879
1,965
Washington
Of course it's, probably, just me. But, this has to be the best pic posted of ELA. Two "Warmachines" in one pic :D.


Nic

I have to agree with you on this. Definitely an awesome pic!

Just checked tracking on mine. It sitting at the nearest USPS sort facility to me. Would normally mean that I would receive it tomorrow. But since tomorrow's a holiday I have to wait until Tuesday. Lol. At least I'm off Tuesday so will have plenty of time to play :D


Sent from my iPhone using Tapatalk 2
 
Status
Not open for further replies.

Users who are viewing this thread