Precise ELA Telescoping Mod by Super-T!
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
So been going "kickless" since last night and its not bad
I made up a new wick and coil at 2.2 ( was aiming lower, but oh well)
Its been gong great, no complaints, a little cooler than with the Kick but I can make another build at a bit lower.
I still want to get a Crown, so I will be stalking the Super-T site to get one.
I made up a new wick and coil at 2.2 ( was aiming lower, but oh well) Its been gong great, no complaints, a little cooler than with the Kick but I can make another build at a bit lower.
I still want to get a Crown, so I will be stalking the Super-T site to get one.
Brass mode
What mode is that? 18650 or 18500 kicked?
Love the drip tip, think its the same one I have by DripTipDezigns? Cant wait to get the brass bits.
So been going "kickless" since last night and its not bad
Its been gong great, no complaints, a little cooler than with the Kick but I can make another build at a bit lower.
I still want to get a Crown, so I will be stalking the Super-T site to get one.
I think my kick is fried, it just makes clicking sounds.
Clinking sound doesn't always mean its broke or going bad. I was having the same problems with my ELA and Kick. Put the Kick in my Saber Touch and its going perfect.
Kick just has a problem with some mods and only thing I can think of is my Saber has a very large contact area inside under the 510 connection so I is in constant contact. On the ELA the area is much smaller so I think it doesnt always make contact. I would have to shake my tube and it would make contact again, but it was getting frustrating so I took the KIck out, adjusted my build and perfect performance.
The same Kick is working flawless on my Saber for at leat 15 hours. Needless to say ELA is firing perfect as always
Beautiful drip tip I wish I had a friend that was handy like that. I do have a brother in law with 11 CNC machines and lathes etc. He is too busy making money that its not worth it to stop production to make me some little "bit"
Kick just has a problem with some mods and only thing I can think of is my Saber has a very large contact area inside under the 510 connection so I is in constant contact. On the ELA the area is much smaller so I think it doesnt always make contact. I would have to shake my tube and it would make contact again, but it was getting frustrating so I took the KIck out, adjusted my build and perfect performance.
The same Kick is working flawless on my Saber for at leat 15 hours. Needless to say ELA is firing perfect as always
Beautiful drip tip
I wish I had a friend that was handy like that. I do have a brother in law with 11 CNC machines and lathes etc. He is too busy making money that its not worth it to stop production to make me some little "bit"
Last edited:
Clinking sound doesn't always mean its broke or going bad. I was having the same problems with my ELA and Kick. Put the Kick in my Saber Touch and its going perfect.
Kick just has a problem with some MODs and only thing I can think of is my Saber has a very large contact area inside under the 510 connection so I is in constant contact. On the ELA the area is much smaller so I think it doesnt always make contact. I would have to shake my tube and it would make contact again, but it was getting frustrating so I took the KIck out, adjusted my build and perfect performance.
The same Kick is working flawless on my Saber for at leat 15 hours. Needless to say ELA is firing perfect as always
Beautiful drip tip
So you think its due to a lack of proper ground due to how the spring contacts the inside of the tube.
I will put it in some different mods and check it out. Thanks for the tip, I was ready to write it off as a goner.
I love the match between Satin ELA and Beta KF3.1
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta
Thanks for the post, got my Kayfun beta, now waiting on my Satin ELA, which arrives in the second round, after my polished ELA which is now showing electronic notification! Almost there, getting excited. Personally I find knowing I'm in the on deck circle is a positive, but I gotta stop buying toppers for my ELA, I already have enough....
Last edited:
A little fuel to feed the fires of angst in those still waiting!
All brass-blinged out with my cheapie v5 attie and home-made brass drip tip! Tiny little beast in 350! (Though it never sees 350 because of my slr builds, but still...)
All brass-blinged out with my cheapie v5 attie and home-made brass drip tip! Tiny little beast in 350! (Though it never sees 350 because of my slr builds, but still...)
Last edited:
On deck preparation, bookmark Stamps.com, see Electronic notification, polish and re coil all atty's destined for the ELA, clear out space on mod rack, and make up a good excuse for my wife as to why I needed to have this.....refresh stamps.com, see Electronic notification, and repeat....
So today is my 2nd vaperversary and these past few months I've been hoping to have my ELA by today -- unfortunately it looks like I'm still at least a month out. So for now I'm turning my attention to rebuildables... the Kayfun Lite looks interesting. Does anyone know if these will show up stateside somewhere, or is overseas ordering about my only option right now?
Haven't used my ela much and this is probably a stupid question, but how do you lock the button?
NM figured it out...
NM figured it out...
Last edited:
-snip- Done!
actually looks pretty good with the cobra. but whats with the grass?
I find it interesting that these have been shipping for a month or so now and not a single one has hit the classifieds. Talk about satisfied owners! Makes me think it worth the wait! What order number are we up too?
- Status
Similar threads
