When the old model Buzz is phased out will the parts remain available, i.e. pcb, top and bottom caps????
- Status
That's cool, hopefully the pcb for the original Buzz will be available for quite some time, after the original Buzz is displaced by the pro model.
Yes I have plenty of stock on the PCB , the caps are basically the same and will fit either model .
Have there been any pics posted yet of the pro buzz? I saw a post a few weeks saying they were coming, but never saw any pics. Is that a buzz pro in the banner on the site?
No pix yet , we are still in the Beta test stage , I should have some soon .
The pic on the site is a 3d rendering of the Buzz from some time ago .
Give us a hint, then. Will it essentially look like the Buzz of old, but with an Infinity-like thumbwheel? Do you have CAD drawings?
Sent from my VM670 using Tapatalk
It will have the slot in the side like the Infinity , we are getting rid of the knurling and replacing it with a sand blasted finish for good grip , also I have changed the top cap design to have a bigger juice well and hopefully nicer look to it .
the bottom and top cap will have a finer knurling on them as well.
they will still be Anodized colors , I am testing a bottom switch design that acts like a flashlight so it will be a master On/Off switch .
Improvements
1. New controller IC .
1B. Wheel adjuster like the Infinity
2. Better battery life
3. short indicator ( bad output voltage ind. )
4. power ON indicator
5. New top cap design , increased juice well size
6. replaced knurling with sand blasted finish
7.Reduced the knurling size on the top and bot. caps
8. 3 color wheel for adjusting the voltage. Red= Higher , white = center , green = Lower voltage.
the bottom and top cap will have a finer knurling on them as well.
they will still be Anodized colors , I am testing a bottom switch design that acts like a flashlight so it will be a master On/Off switch .
Improvements
1. New controller IC .
1B. Wheel adjuster like the Infinity
2. Better battery life
3. short indicator ( bad output voltage ind. )
4. power ON indicator
5. New top cap design , increased juice well size
6. replaced knurling with sand blasted finish
7.Reduced the knurling size on the top and bot. caps
8. 3 color wheel for adjusting the voltage. Red= Higher , white = center , green = Lower voltage.
Oh wow, an on / off switch would be great! You guys probably don't understand that taking the carto / atty off for safety is a PITA for those of us who carry a purse. It's like tossing something into a black hole!!
We will see how the prototype works out , I dont see any reason why it wont BUT ???? you never know
Not only do I have an ∞ branded on my azz, sometimes my Buzz will fire in my dress shirt pocket. Wait can I say, I AM just that talented !!!!
LOL - I fell asleep after work one day last week and I woke up startled because my shoulder was burning and I heard a sizzling noise - I had fallen asleep and rolled over on my Infinity and was triggering the switch!
Hey, is there going to be a clear polycarbonate option? that would be sooo cool. And bulletproof.
Will you still be able to stand the Buzz upright with the bottom master switch
Yes , it will just be a 1/4 turn on the bottom cap o turn it off , I theory ! it has to be tested first.
Now the Polycarbonate would be incredible to be able to see the inner workings of your device while vaping would be too awesome!
Nate aka Darth Vapor
Nate aka Darth Vapor
- Status
Similar threads
